Folding reach mowers

... BERKY Slope Mower type 2200 can be used flexibly and impresses with its high efficiency. The small track width of the slope mower allows mowing on fields without affecting the harvest. Thanks to the design ...

The Mower-Hark-Combi is perfect for working trenches in just one operation. The front-mounted cutter bar cuts the vegetation in an environmentally friendly way. The rear-mounted belt clearing or roundabout clearing ...

Working width: 1.2 m

... attachment is designed for professional use in water maintenance. The reach of up to 9 m from the centre of the vehicle is just as convincing as the swivel range of 220°. Even difficult-to-reach areas ...

Working width: 1.2 m

... tool holder must be equipped with a crushing head or cutter bar ( see " Accessories / Wear " at the bottom of the page ) •Reach to tractor: 2,50 - 2,60 m depending on equipment •3 point linkage cat 1 or 2 •PTO speed ...

Working width: 1.3 m

... tool holder must be equipped with a crushing head or cutter bar ( see " Accessories / Wear " at the bottom of the page ) -Reach to tractor: 3 - 3,20 m depending on equipment -3 point linkage cat 1 or 2 -PTO speed ...

Working width: 495 cm

• cable controls · 3m. flexible cables · antireverse safety lever for flail head • all joints have forged and galvanized pins on bushings • arm descent control valves • tank with hydraulic oil · 120 liters • GR 3 gearbox • GR 3 double ...

Working width: 460 cm

• cable controls · 3m. flexible cables · antireverse safety lever for flail head • all joints have forged and galvanized pins on bushings • arm descent control valves • tank with hydraulic oil · 80 liters • GR 3 gearbox • GR 3 double ...

Working width: 500 cm - 550 cm

• cable controls · 3m. flexible cables · antireverse safety lever for flail head • all joints have forged and galvanized pins on bushings • arm descent control valves • tank with hydraulic oil · 120 liters • GR 3 gearbox • GR 3 double ...

Working width: 105, 125 cm

Hydraulic mower. Suitable for cutting grass, bushes and prunings.

Working width: 105, 125 cm

Professional hydraulic brush cutter. Suitable for cutting grass, vegetation in general, shrubs, and branches Standard equipment -PTO 540 g./min -Remote control console with lever operation -Cutting head unit -Safety shock absorber ...

Working width: 105, 125 cm

Professional hydraulic brush cutter. Suitable for cutting grass, vegetation in general, shrubs, and branches. Standard equipment -PTO 540 g./min -Remote control console with lever operation -Cutting head unit -Safety shock absorber ...

Working width: 100 cm

Boom mower with central pivoting arms frame, for cutting grass, bushes and prunings. Standard Parallelogram system on the 1st arm Double oil filter (intake and exhaust) Rear shock-proof bar with ...

Working width: 100 cm - 120 cm

Semi-professional range with central rotation of the arm 100°, is ideal solution for cutting grass, shrubs, hedges or ditches clean up a.s.o. Suited for 70-90 HP tractors.

Working width: 1.2, 1.5 m

... small compact tractors to small pivot steer loaders, in conjunction with a front mount kit. Key Features: -3.2m or 3.5m reach -Left or Right hand cutting (swing over capability) -Cable or Electronic Proportional ...

Working width: 905, 1,000 mm

The Robin is a professional compact Arm mower – perfect for amenity and estate use and also a firm favourite with small farmers as it can verge mow or hedge trim just as well as some of our larger models. The Robin ...

Working width: 950 mm

The Raven is a rear mounted Arm mower designed to meet the demands of smaller agricultural, horticultural, landscape & amenity customers. The rugged design ensures excellent performance for a small, compact machine and ...

Working width: 75 cm

... adjustment of mower head with hoses and quick couplings, hydr. cylinder for tilt adjustment of the mower head with hoses and quick couplings, mechanical spring-device for IN/OUT swing of the mower ...

Working width: 150 cm

... for side shift, hydr. cylinder for height adjustment of mower head, hydr. cylinder for tilt adjustment of the mower head, mechanical spring-device for IN/OUT swing of the mower head, ...

Mod. ECOLOGY, Weed-Mower c/w hydraulic implement To fit the mulchers AF and TFB/Y. Suited for the ecological cleaning of grass on vineyards and orchards. Standard equipment: full length rotor cover, manual height adjustment, ...

Working width: 60 cm

ROLLER 100 is ideal for tractors of low power (20-30 HP) and a minimum mass of 800 kg, for cleaning ditches, road sides, embankments, hedges and parks. It is available in two versions, with boom lengths ranging from 3,000 mm to 3,500 ...

Working width: 80, 100 cm

The FALCON 200 is ideal for medium-power tractors (35-50 hp) with a minimum mass of 1,500 kg, for cleaning ditches, roadsides, embankments, hedges and parks. It is available in eight versions, with boom lengths ranging from 3,150 mm to ...

Working width: 100, 125 cm

The EAGLE 300 is ideal for medium and large tractors (70-85 hp) with a minimum mass of 2,500 kg, for cleaning ditches, roadsides, embankments, hedges and parks. It is available in six versions, with boom lengths ranging from 4,550 mm ...

Working width: 60, 80, 102, 122 cm

Reversible bush cutters with hydraulic arm, suitable for mini-tractors with rear power lift or reversible direction of movement. Ideal for the upkeep of both public and private parks and gardens. Standard Features Shock-proof device ...

Working width: 80 cm - 125 cm

Bush cutters with hydraulic arm fitted with automatic hydraulic return to safeguard against knocks. Suitable for clearing ditches, verges, river banks and for the maintenance of public parks and private gardens. Standard Features Shock-proof ...

Working width: 100, 125 cm

Professional scrub-clearing machines with hydraulic arm with parallelogram, automatic return hydraulic shockproof device with 109° rotation and head with overall 235° rotation. Suitable for cleaning ditches, gutters and embankments and ...

Working width: 640, 840, 1,080 mm

... designed for mini-midi excavators with operating weight up to 5.5 tons. The built-in-unit carpentry in our DA (standard) flail mower series, allows it greater resistance to possible accidental impacts. The anti-shock ...

Working width: 650, 840, 1,080 mm

... models are available in operating widths of 650, 840 and 1,080 mm. The built-in-unit carpentry in our DA (heavy) flail mower series, allows it greater resistance to possible accidental impacts. The anti-shock and ...

Working width: 1,300 mm

... support roller make the brush cutter able to work in both directions. The built-in-unit carpentry of our DB Series flail mower, allows it greater resistance to possible accidental impacts. The anti-shock and anti-cavitation ...

Working width: 1.2 m

The Malinia side-arm flail mower is the ideal side arm for clearing narrow paths, clearing difficult to access places, maintaining ditches or roadside hedges, pathways or in fields.

Arm Camel with range of 9 m the biggest machine of such type the SaMASZ has in offer. It has slide second part of the telescopic arm. The arm is equipped with independent hydraulic unit by well established manufacturer with cooler featuring ...

Working width: 1.2 m

The 7060T is a telescopic machine with a retracted reach of 4.80M and a maximum reach of 6.0M when fully extended. This gives the trimmer a compact design without comprise to its reach ...

Working width: 183 cm

Gilbert GM Series Brushcutter-Mowers are brushcutter heads that attaches to the side of a motor grader or other carrier for roadside maintenance. This patented concept cuts vegetation as opposed to mulching it making ...

The side flail mower, combined with the power and stability of the MultiOne, makes it possible to reach places it is not safe to drive. This makes mowing side slopes, ditches, waterfronts, and other hard ...

Working width: 100, 120 cm

Hydraulic bush-cutter suitable for minitractors with 13-35 HP, developed for cutting up drains, street edges, embankments and parks. STANDARD EQUIPMENT – Teleflexible remote commandment (2000 mm). – Independent hydraulic installation. – ...

Working width: 105 cm

Hydraulic reach mower with first lower arm attachment, suitable for users who need to reach more depth and distance. Frame in cast metal guaranteed with 3 years warranty. Mechanical safety ...

Working width: 1,170 mm

Working width: 47, 49, 59 in

... combination of cutting capacity and reach into a rear mounted boom mower designed to handle extensive hedge cutting and verge-mowing duties. With Variable Forward Reach ...

Working width: 165, 120 cm

... innovative mower with a built-in chopping unit, based on the principle of a disc mower. The mower has several advantages over the traditional flail mower. The Ecochopper ...

Working width: 1.2 m

The verge mower is perfect for near roadside mowing work, either right-hand or left-hand operation. Due to its low height, this mowing device is suitable for use underneath crash-barriers. The speed for evasive movements ...

Working width: 1.9 m - 2.3 m

... equipped with a flail mower head, either with a scanning automatic or with a manual control. A guiding post mower is available as an exchange unit for the mowing head. The max. reach ...

To ensure the functionality and reliability, the machine Brushcutter and crawler hydraulic shredder ILF C1200 8.5 / 13 meters is built entirely at our plant. Specially designed for mowing grass, shrubs, for the maintenance of the green, ...