Subsoilers

130 companies | 308 products
exhibit your products

& reach your clients in one place, all year round

Exhibit with us
3-point hitch subsoiler
3-point hitch subsoiler
DMR HP series

Width: 1,750, 3,850, 2,450, 3,150 mm
Working depth: 650 mm

Hydro-pneumatic subsoiler has got a very heavy strong structure which can reach the best performance in every soil even in combination with high power tractors. Hydro-pneumatic safety system works in extreme conditions, ...

3-shank subsoiler
3-shank subsoiler
WKT Series

Width: 360, 550, 1,100 mm
Working depth: 400 mm

Subsoiler (working depth 400 mm) ■ Subsoiler suitable for horticultural purposes ■ Maximal free space in the frame ■ Outer tines are mounted with bolths and in width adjustable (max. 110 cm) ■ ...

See the other products
WIFO-ANEMA B.V.
3-point hitch subsoiler
3-point hitch subsoiler
DK, CP series

Width: 1,040 mm - 4,570 mm
Working depth: 550, 713, 955 mm

YTAGRI Subsoiler plays an effective role to break the impermeable hard layer due to ploughing with soil depth or other reasons. The tines that go deeper than the standard ploughing enables the water, air and temperature ...

5-shank sub-soiler
5-shank sub-soiler
MEGATRON, T series

Width: 3, 2.5, 4 m
Working depth: 10 cm - 55 cm

The new type of MEGATRON subsoiler which has been added to our production range, has been designed in every detail to be a functional machinery, easy and economical to use and maintain and to succed maximum possible results. ...

See the other products
Kariotakis
5-shank subsoiler
5-shank subsoiler
SCB series

Width: 2,940 mm

The BALDAN SCB-CR Remote Control Sugarcane Subsolier is used to break up compacted deep layers. SCB-CR has 26 "cutting discs that let you work on straws, rods with automatic turn-on / turn-off system and replaceable nozzles and lump breaking ...

5-shank subsoiler
5-shank subsoiler
Delta

Width: 1.5, 6 m

The special shape of the tine blades, protective shear bolt, diameter 25mm and their special arrangment on the V-frame (inside diameter 80cm) result in outstanding soil entry even when the soil is very hard or compacted. Working widths ...

3-point hitch subsoiler
3-point hitch subsoiler
SOILBREAKER

Width: 1.5 m - 5.5 m
Working depth: 70 cm

... water storage of the soil are also favoured by the breaking up and loosening of the subsoil. Due to the V-frame of the subsoiler, the vertical blades and the optimum angle of the points, the device is very easy to ...

5-shank subsoiler
5-shank subsoiler
304P5RPP, 304P7RPP, 304P9RPP

Width: 2.5, 3.5, 4.5 m
Working depth: 450 mm

Rata Panerazer subsoilers are designed specifically for use on tractors over 120hp or where the soil to be aerated is particularly heavy. All Rata subsoil aeration equipment with more than 3 legs features a double bar ...

See the other products
Rata Equipment
4-shank subsoiler
4-shank subsoiler
EV-10

Width: 0.8 m - 2.5 m

The GRUBBER VINEYARD EV-10 is the only one equipped with a new extensible body. This new conception allows to make a work in the center of the row, from a minimum of 80 cm till a maximum of 130 cm. The new system of vertical lift allows ...

3-point hitch subsoiler
3-point hitch subsoiler
Spider 1

Anchor subsoiler with safety device with bolt, interchangeable hardened bushings and tunnel borer Mechanical inclination regulator Reversible chisel cm 7

See the other products
Arrizza
5-shank subsoiler
5-shank subsoiler
EJDER Series

Width: 250, 300, 400 cm
Working depth: 30 cm - 55 cm

Product Description In the requirement of breaking the “plow-pan”, “natural-pan” or “traffic pan” at the soil we need to work deeper. EJDER and KUNDUZ series Chiesels are used on 30-55cm depth of the soil to break the “pan” and ...

See the other products
Azim Ziraat Aletleri San. ve Tic. A.S.
3-shank soil loosener
3-shank soil loosener
MG,MGW series

Width: 1 m - 3 m

These subsoilers are designed for deep soil opening without opening its layer. They enable better moistening and and drainage in the surface layer of the soil. Available roller (MGW) provides better working depth control, ...

5-shank subsoiler
5-shank subsoiler
WBG , WBGH series

Width: 270, 300, 450, 630 cm

The Grassland subsoiler is designed to break up pans and surface compaction while lifting and opening up the subsoil up to 40 cm for improved aeration and drainage, without damaging the sward. - Subsoiling below the ...

See the other products
EVERS Agro B.V.
3-point hitch subsoiler
3-point hitch subsoiler
KRET series

Width: 3, 4 m

Standard equipment •suspension axles: •ø70-825/ø36 mm (versions 3 & 5) •ø70-965/ø36 mm (version 7) •200×100 mm rigid frame •L type tine •bolt-protected tines (KRET B), •spring-leaves protected tines (KRET S) •coulters with ...

See the other products
Unia
3-point hitch subsoiler
3-point hitch subsoiler
DELTA NOVUM

Width: 2.5, 3.5, 5 m
Working depth: 30 cm - 60 cm

The DELTA NOVUM implement sets itself apart from all other subsoilers by the fact that it is a subsoiler and heavy-duty cultivator in one and can therefore complete both soil cultivation and stubble processing ...

3-shank subsoiler
3-shank subsoiler
DK series

Width: 20 cm - 160 cm
Working depth: 55 cm - 75 cm

SUBSOILER Share economy with two sided reversible points. Depth adjustment option. Leg Bullets standart with 10 cm diameter OPTIONAL PARTS Roller

5-shank subsoiler
5-shank subsoiler
ST series

Width: 2.35, 1.35 m
Working depth: 600 mm

See the other products
torpedo maquinaria
5-shank subsoiler
5-shank subsoiler
RTMN-CP series

Width: 150 cm - 450 cm

See the other products
ROTMANN
3-point hitch subsoiler
3-point hitch subsoiler
DK series

Width: 1,100 mm - 3,300 mm
Working depth: 550 mm - 750 mm

The primary soil tillage machine is mounted from tractor's hydraulic lifting unit and universal three point linkage system. Therefore transportation to the field can be easily done.Hard ground is composed under 25-40 cm depth below the ...

5-shank subsoiler
5-shank subsoiler
100 series

Width: 1.5, 1.8, 2, 3 m

ripper with roller
ripper with roller

The Schmeiser Mid-Row Ripper isn't just an ordinary ripper. It's more like a root zone management system with impressive results and tremendous acceptance for use in both vineyard and orchard applications. Its 'U' shaped, ...

See the other products
T G Schmeiser Company, Inc.
5-shank subsoiler
5-shank subsoiler
PCH-2.4

Width: 2.4 m
Working depth: 25 cm - 50 cm

PURPOSES OF SUBSOILERS: - Deep loosening down to 45 cm (1’5,7”) - Creation of optimal conditions for infiltration and aeration of the upper soil layer ADVANTAGES: - Three-point coupling is available for Cat. III ...

See the other products
VELES
2-shank subsoiler
2-shank subsoiler
SSHD2S, SSHD2L

Width: 49 in
Working depth: 19, 23 in

A great tool for gardeners and vegetable production! The Double-Shank Subsoiler simply doubles down on the strength and power of it’s single-shank younger brother. With a second 1 ¼” parabolic, high carbon steel shank, ...

drainage subsoiler
drainage subsoiler

Width: 1,220 mm
Working depth: 700 mm

-Two uses: SUB SOILING up to 700 mm depth and DRAINING from Ø 125 mm diameter -To set up flexible pipes, electric or phone cables... -Long chasis making easier the process into the trenches -Oversized depth control wheels (600 ...

1-shank ripper
1-shank ripper
171

Width: 315 mm
Working depth: 661 mm

Excavator ripper tooth A.TOM. Height - 947 mm. Weight - 145 kg.

exhibit your products

& reach your clients in one place, all year round

Exhibit with us