{{#pushedProductsPlacement4.length}} {{#each pushedProductsPlacement4}}
{{product.defLight}}
{{#if company.requestButtonsVisibility.requestButtonQuestion == "ACTIVE"}}
{{elseif company.requestButtonsVisibility.requestButtonWhereToBuy == "ACTIVE"}}
{{/if}}
{{product.productLabel}}
{{product.model}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}

{{{product.idpText}}}

{{productPushLabel}}
{{#if product.newProduct}}
{{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement4.length}}
{{#pushedProductsPlacement5.length}} {{#each pushedProductsPlacement5}}
{{product.defLight}}
{{#if company.requestButtonsVisibility.requestButtonQuestion == "ACTIVE"}}
{{elseif company.requestButtonsVisibility.requestButtonWhereToBuy == "ACTIVE"}}
{{/if}}
{{product.productLabel}}
{{product.model}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}

{{{product.idpText}}}

{{productPushLabel}}
{{#if product.newProduct}}
{{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement5.length}}
fixed subsoiler / with hydraulic adjustment
fixed subsoiler
HELIOS

Working width: 2 m - 4 m

Then loosening shall be required, moreover before sensitive crops such as vegetables, oilseed rape, sunflower, ... With its twin-beams frame and its high clearance (beam to beam distance 800 mm, underframe clearance 820 mm) HELIOS can ...

fixed subsoiler / with roller
fixed subsoiler
HELIPLOW

Working width: 3 m - 4 m

Latest tractors evolutions (more horse power, more heavy, better balance, powerful hydraulic lift) allows combined use of soil loosener. Soil loosening while seeding ensures creation of ideal conditions for root development, improving ...

3-point hitch subsoiler / fixed
3-point hitch subsoiler
CLG-II

Working width: 0.9 m - 2.7 m

Chisel ploughs, Subsoiler for tough conditions Designed to loosen subsoil and break up wheel tracks, to improve soil structure and promote good drainage. By increasing the soil's permeability the seedbed conditions ...

3-point hitch subsoiler
3-point hitch subsoiler
CLI Series

The single-beam subsoiler from Kverneland has all the advantages of the curved tine and can be used in combination. An oversized beam of 200 x 200 x 10 receives all the tine supports and the front and rear linkages ...

subsoiler
subsoiler

Subsoiler which allows, on an easy, quick and very effective way to hollow out the paths that will be stabilized with polymers, preparing this layer to be stabilized with a milling machine with the security that it won't ...

5-shank soil loosener / 7-shank / 9-shank
5-shank soil loosener

The subsoiler for draing the ground is a cutting device that does not alter the succession of the layers in that it does not overturn the tilled soil as a plough would, nor does it mix the soil as would a rotary tiller. Three ...

5-shank ripper / 7-shank / 9-shank / 11-shank
5-shank ripper
L, M, P, Mono L, Mono P Series

Working width: 1.85 m - 3 m
Working depth: 25 cm - 70 cm

They are suitable for rough working of the ground at considerables depths (between 25 and 70 cm) to support the oxygenation of the earth and remedy to the problems of strong tamping - caused by heavier and heavier machines. They are ...

3-shank soil loosener / 3-point hitch
3-shank soil loosener
RP 700

Working width: 700 mm
Working depth: 2,200 mm

The scarifier RP700 is a tool characterized by a robust frame upon which working bodies consisting of vertical anchors with pointed plowshares and interchangeable steel knives are fixed. The anchors arranged on a straight frame have the ...

2-shank soil loosener / 3-point hitch
2-shank soil loosener
RP 702-18

Working width: 1,950 mm
Working depth: 800 mm

The scarifiers of the RP series are composed of disks fitted with anchors at a variable height of between 700 and 900 mm, of various forms and masses, and allow for working at a greater depth than normal. The scarifiers are equipped with ...

5-shank subsoiler / 3-point hitch / with roller / vineyard
5-shank subsoiler
ESL205

Working width: 1,500, 1,800 mm
Working depth: 300, 150 mm

The ESL � ESN model grubbers are made with shaped pantographs and laminated elements, arranged in rows. Couplings with rigid anchors and reversible ploughshares are fitted onto the square profiled pantograph bars (for grubber mod. ESL ...

3-shank subsoiler / with gauge wheels
3-shank subsoiler
RAMBO MINI Series

Working width: 1.4 m - 2.7 m
Working depth: 0.2 m - 0.5 m

The subsoiler CLD/ RAMBO MINI is produced to work with tractors from 45 to 110 HP. Its versatility allows to work also in greenhouses with tracked tractors and on hilly soils. Using CLD/ RAMBO MINI can be obtained exceptional ...

See the other products
Badalini srl
5-shank subsoiler / with gauge wheels
5-shank subsoiler
RAMBO MEDIUM Series

Working width: 1.9 m - 2.7 m
Working depth: 0.3 cm - 0.6 cm

This is the ideal machine for medium horsepower, from 70 to 125 HP (on average 100 HP). It allows considerable energetic savings thanks to the particular clearance of its tines. These, with their inclination, allow the tractor to absorb ...

See the other products
Badalini srl
subsoiler with hydraulic adjustment
subsoiler with hydraulic adjustment
SKORPIO STANDARD Series

Working width: 2.4 m - 2.75 m
Working depth: 0.3 m - 0.6 m

... at the same time a considerably lower power absorption in comparison to traditional subsoilers. The main features of the model CKD/ and of all the Badalini subsoilers are: no lifting of stones and clods; breaking ...

See the other products
Badalini srl
5-shank subsoiler / 3-shank / 3-point hitch
5-shank subsoiler
SSS Series

Working width: 70, 1,850, 950 mm
Working depth: 610 mm

Landforce Sub Soiler is a tractor mounted implement used to loosen and break up soil at depths below the level of a traditional disk harrow or rototiller. Benefits Landforce Sub Soiler is a farming ...

5-shank soil loosener / 9-shank / 7-shank / 3-point hitch
5-shank soil loosener
TERRALAND TN series

Working width: 4, 3 m
Working depth: 25 cm - 65 cm

-Intensive tillage up to depths of 65 cm. -Rigid and solid frame. -Made of high-strength Alform steel. -3 times angled operating elements ensure easy soil penetration. -Extremely high throughput of the machine.The frame height ...

9-shank subsoiler / 11-shank / 3-point hitch / vineyard
9-shank subsoiler

Vine shoot collector TERRAL: main points Extandable frame for vine row adjustment Height adjustable teeth with deep tracks Locking jack High lifting height 3 points attachment for any type of tractor Crutches for storage and ease

3-point hitch subsoiler
3-point hitch subsoiler
Drenater DRP-M1

Working width: 1,050 mm
Working depth: 75 cm

The DRENATER SERIES subsoilers allow the microcracking of the soil with variation of the depth. The goal of the action is to facilitate the proper drainage of water, but also to avoid the mixing of deep and still layers ...

See the other products
OFFICINA PASTO' di Elia Pasto' Snc
3-point hitch subsoiler
3-point hitch subsoiler
Drenater DRP-P1

Working width: 1,100 mm
Working depth: 85 cm

The DRENATER SERIES subsoilers allow the microcracking of the soil with variation of the depth. The goal of the action is to facilitate the proper drainage of water, but also to avoid the mixing of deep and still layers ...

See the other products
OFFICINA PASTO' di Elia Pasto' Snc
2-shank subsoiler / 3-point hitch
2-shank subsoiler
Drenater DRP-P2/P3

Working width: 2,500 mm
Working depth: 85 cm

The DRENATER SERIES subsoilers allow the microcracking of the soil with variation of the depth. The goal of the action is to facilitate the proper drainage of water, but also to avoid the mixing of deep and still layers ...

See the other products
OFFICINA PASTO' di Elia Pasto' Snc
5-shank subsoiler / 3-point hitch
5-shank subsoiler
RIPPA™

Working depth: 500 mm

Description Heavy Duty Subsoiler Specification • Working depth up to 500mm deep. • Category 3, quick attach heavy duty rear linkage. • Heavy Duty 5 leg system.

fixed subsoiler
fixed subsoiler
DPT series

Working width: 80, 280, 500, 380, 180 cm
Working depth: 30, 70 cm

French type subsoiler is a mounted type machine which cultivates the soil without leaving any raw soil between the tines due to the stand structure and by breaking the lower plow layer without carrying the infertile ...

5-shank subsoiler / 3-shank / 2-shank / 4-shank
5-shank subsoiler
GZ Series

Working width: 2 m - 5 m

Specifications - two rows of tines with regulated spacing between the tines: from 400mm to 1000mm. - work width 2 and 3 tine width up to 2,4m - work width 4 and 5 tine width up to 3m - No. of tines: from 2 to 5 - 900mm clearance under ...

5-shank ripper / with gauge wheels
5-shank ripper
9200 series

Working depth: 0.4, 0.2 m

... commitment to engineering, ergonomics, and build quality. The 9200 In-Line Ripper is no exception, with its double-frame design for years of dependable performance. The Salford In-Line Ripper is engineered ...

3-shank subsoiler / 3-point hitch / fixed
3-shank subsoiler

Working depth: 95 cm

Our products are manufactured with single, double and triple body profiles. Purpose of Use *Cultivates even the deepest part of the soil. *Gets rid of the rough soil on the land. *Protects the soil against erosion from ...

5-shank subsoiler / 7-shank / with hydraulic adjustment / 3-point hitch
5-shank subsoiler
ZD series

Working width: 250, 300 cm
Working depth: 50 cm

The Soubsoiler Zanon thanks to the particular shade of anchors and the sturdy steel frame that supports allows a homogeneous working depth of 50 cm eliminating stagnant water and thereby storing moisture ensuring a mile result yields ...

5-shank subsoiler / 7-shank / 9-shank / with hydraulic adjustment
5-shank subsoiler
EJDER series

Working width: 300, 400, 250 cm
Working depth: 30 cm - 55 cm

Product Description In the requirement of breaking the “plow-pan”, “natural-pan” or “traffic pan” at the soil we need to work deeper. EJDER and KUNDUZ series Chiesels are used on 30-55cm depth of the soil to break the “pan” and ...

5-shank subsoiler / 7-shank / 9-shank / with hydraulic adjustment
5-shank subsoiler
KUNDUZ series

Working width: 250, 400, 300 cm
Working depth: 30 cm - 55 cm

Product Description In the requirement of breaking the “plow-pan”, “natural-pan” or “traffic pan” at the soil we need to work deeper. EJDER and KUNDUZ series Chiesels are used on 30-55cm depth of the soil to break the “pan” and ...

5-shank subsoiler / 7-shank / 3-shank / 3-point hitch
5-shank subsoiler

Working width: 2, 2.9, 1.5 m
Working depth: 40 cm

With this implement we can achieve the soil's deepest tillage without inverting the soil. The deep subsoiler is a modern implement, based upon new and innovative ideas and can be used instead of the plow. It's greatest ...

4-shank soil loosener / fixed
4-shank soil loosener
Combiplow Silver

Working width: 3 m
Working depth: 37.5 cm

... blades. Equipped with a roller to control the working depth, the Combiplow can be used on its own. Features Combinable soil loosener Bridge frame with 160x160 mm steel tubing Top link coupling cat. n°2 2 parking ...

See the other products
AGRISEM International
4-shank soil loosener / fixed
4-shank soil loosener
Combiplow Gold

Working width: 3 m - 4 m
Working depth: 29 cm

... . Equipped with a roller to control the working depth, the Combiplow can be used on its own. Features: Combinable soil loosener Bridge frame with 160x160 mm steel tubing Top link coupling cat. n°3 2 parking stands Shear ...

See the other products
AGRISEM International
6-shank soil loosener / 3-point hitch / fixed
6-shank soil loosener
Combiplow Platinum

Working width: 3 m - 4 m
Working depth: 15 cm - 35 cm

The Combiplow Platinum is a combinable soil loosener : it was created to fit between the tractor and a tool such as a combined seeding, a harrow or a rotary harrow. This model is available in shear bolt security or in ...

See the other products
AGRISEM International
11-20 shank ripper / fixed / with roller
11-20 shank ripper
Ecolo-Tiger® 875 series

Working width: 6.7, 5.5, 7.9, 4.3 m

The most aggressive disk ripper on the market with aggressive disk-cutting power, high underframe clearance, and minimum 36-inch spacing between points. For Heavy Residue and Level Output Ecolo-Tiger Evolution The Ecolo-Tiger® ...

See the other products
CASE IH
4-shank soil loosener
4-shank soil loosener
TL

Working width: 3 m
Working depth: 15 cm - 25 cm

The compact designed, close coupled TL deep loosener offers the possibility of the optimum cultivation technique without prior ploughing even in heavy trash condition. Wide wing shears and a large clearance between the legs allow a blockage ...

3-point hitch ripper
3-point hitch ripper
22B

Working depth: 22, 16 in

The single parabolic standard ripper on the 22B Integral Ripper provides an economical means of shattering hardpan by exploding soil upward to promote root growth.

See the other products
John Deere
3-shank subsoiler / 5-shank / 7-shank / fixed
3-shank subsoiler
PINOCCHIO series

Working width: 130 cm - 300 cm
Working depth: 45 cm

The PINOCCHIO model, is designed for low or medium power tractors (from 50 to 160 HP), and is characterized by a maximum working depth of 45 cm. PINOCCHIO is available in different widths and shank number (from 3 to 7), just right for ...

See the other products
GASPARDO SEMINATRICI S.p.A.
3-shank subsoiler / 3-point hitch
3-shank subsoiler
Labrador 160

Working width: 100 cm - 225 cm
Working depth: 65 cm

... yield losses. To prevent this from happening, targeted subsoil loosening is particularly important. The reliable Labrador subsoiler is ideal for loosening tramlines and breaking up compacted soils. - Two or ...