1. Farm Infrastructure
  2. Waste management
  3. Mounted mulcher
  4. F.X.S. Sauerburger Traktoren und Gerätebau GmbH

Mounted mulcher ALPHA
hammerroadsidegrass

mounted mulcher
mounted mulcher
mounted mulcher
mounted mulcher
mounted mulcher
mounted mulcher
mounted mulcher
Add to favorites
Compare this product
 

Characteristics

Type
mounted
Technology
hammer
Applications
roadside, grass
Number of hammers
16 hammers, 20 hammers, 12 hammers, 36 hammers, 48 hammers, 60 hammers, 64 hammers, 80 hammers
Other characteristic
PTO-driven, for tractors, offset
Cutting width

1.5 m, 1.8 m, 2 m, 2.5 m
(4'11" , 5'10" , 6'06" , 8'02" )

Rotational speed

540 rpm
(3,393 rad.min-1)

Weight

685 kg, 720 kg, 790 kg, 1,090 kg
(1,510.17 lb, 1,587.33 lb, 1,741.65 lb, 2,403.04 lb)

Description

The SAUERBURGER rear and side mulcher ALPHA Version GI is especially suitable for the maintenance of slopes and ditches. A stable parallelogram adjustment on the three-point linkage with a wide range of adjustment enables problem-free working both directly behind the tractor and offset to the right. Field and path edges can be neatly mulched and kept free of unwanted growth of grass, hedges and other scrub. The unit is also ideally suited for use along slopes and ditches thanks to its swivel range of 90° upwards and up to 70 ° downwards. The SAUERBURGER ALPHA mulcher also cuts a very good figure when chopping crop residues in arable farming, e.g. maize, straw, etc., as well as when maintaining meadows and pastures. It promotes rapid decomposition and humus formation, even grass growth, distributes cow dung and thus prevents heavy growth in certain areas. If an ALPHA version GA is used in conjunction with a SAUERBURGER WM 3000 mulcher mounted on the front hydraulics of the tractor, a total working width of up to 5.14 m can be achieved. (Siehe Schemazeichnungen für die diversen Typen). This combination of units enables enormous savings in time and costs. In the very robust mulching head, there are impact bars at the inlet and in the housing In conjunction with the working tools, which can be adapted to the respective operating conditions, they ensure a very short and torn mulch or chaff. A track roller mounted close behind the flail shaft ensures precise height control and prevents the greatest possible ground contact in the event of unevenness, so that wear on the working tools is minimised.

VIDEO

Catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.