Cylinders

J&D Manufacturing's Pruden Inlet Actuator is designed to work with many types of inlet openings including ceiling and side wall inlets. The Inlet Actuator has a protective housing with sealed electrical components for maximum performance ...

Stroke : 650, 1,200, 1,000, 800 mm

Ushering in the next evolution of electric actuators, the Thomson Electrak XD is strong enough to take on hydraulic applications while, at the same time, be smarter, smaller and more efficient than competitive technologies. On top of ...

Stroke : 20 mm - 1,000 mm
Speed: 3.5, 23.5 mm/s

TiMOTION's JP3 series inline linear actuator was designed for low load industrial applications where up to IP69K dust and liquid ingress protection is necessary. It is best suited for applications with visual or compact installation dimension ...

Pressure: 180 bar

... multiple stages (from 2 to 10 stages). The cylinders are designed to operate at a working pressure of 180 bar. Maintenance of the tipper cylinder is simple – just with seals. Application Telescopic ...

Bore: 32 mm - 125 mm

The standard cylinder conforms to ISO15552, cylinder diameter φ32~125, tie rod structure, double action. Travel: 1~2800mm Serial Advantage • Strong tie rod construction. • A variety of buffering ...

Stroke : 130 in

Weight - 315 lbs Base End Mount Type - Cross-Tube Base Mount Width - 7.00″ Base Pin Size - 2.00″ Closed - 56″ Extend Port/Plunger - 1.00" NPT 90D Open Extended Length - 186″ Rod End Mount Type - Drilled Thru Lug Rod ...

Stroke : 51 mm - 171 mm
Bore: 1.5 in - 6 in
Pressure: 3,000 psi

The Proven Performer 3000 PSI Hydraulic Cylinder Our WRC cylinders are proven performers for agricultural machinery that needs to work tirelessly at critical times during the seasons. Serving primarily ...

Actuators in harvesters enable precise adjustments of functions like spout adjustments and reel positioning, streamlining operations and improving performance. CHALLENGES Electric linear actuators in harvesters face environmental ...

Stroke : 11 mm

HEATING / COOLING / INDUSTRIAL USE ALL-IN-ONE actuator for 3 points without relay or 2 points with relay connection Class protection: IP67 Operating time: 35 sec for 90° rotation – 11Nm

Stroke : 100 mm

The linerare actuator can be used with bracketing on the diesel feed pump to control engine speed. Excursion: 100 mm Speed: 10 mm / sec Installation: On bracket Voltages: Available for 12Vdc / 24Vdc supplies.

... double acting hydraulic cylinder HM1-M250 series with welded endplug and with agricultural ball joints both in the front and in the rear is particularly required in the agricultural sector. Deriving from the standard ...

... easy lifetime integration in the vehicle. Features & Benefits •An impressive performance enabled through favourable cylinder design combined with an advanced integrated controller as well as fast response and high-flow ...

Hydraulic Rams & Cylinders are designed, manufactured and tested by using the cutting edge technologies and standards. Our cylinders are categorized under 5 main groups in terms of their design features. 1. ...

•Directional rotation selector •Universal flange for shifts Ø6 to Ø16 mm and square from 5 to 12 mm •Models L...C of quick running •For shutters till 1m2, depending on manufacturer

FAROIL can made any type of hydraulic cylinder with maximum bore of 200 mm. Single-acting or double-acting hydraulic cylinders, steering cylinders, plunger cylinders, ...

Stroke : 235, 385 mm

Single Acting Cylinder Rod diameter mm 25 50 Rated pressure Mpa 16 16 Dimenssion mm 418 812

... standard hydraulic cylinders. A severe final testing reproduces the normal working conditions of cylinders and the care taken in the choice of materials and seals used provide maximum technology in ...