{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... knapsack spraying. Larger nozzle sizes and lower pressures deliver coarser sprays. The spray quality should always be matched as directed on the agrochemical spray label. NEW DEFY 3D NOZZLE New ...
Pentair (Hypro & Shurflo)
A TWIN FINER AIR-INDUCTION NOZZLE IN INTEGRAL FASTCAP* Twin 30° forward and rearward inclines, based on the finer droplet spray quality of GuardianAIR . Ideal for ear sprays and penetrating into denser crop canopies. All ...
Pentair (Hypro & Shurflo)
... pressures (from 1.5 to 3 bar). - Recommended for use at low pressure (around 1.5 bar) for low volume applications and spray drift reduction (bigger droplets). - May be used at higher pressure (above 2.5 bar) to ...
CoorsTek
... ground. - Designed for all types of nozzle holders, using the same cap as ISO nozzles (for example: AXI). - Air induction spray nozzle (venturi system): sprays large drops filled ...
CoorsTek
... ground. - Designed for all types of nozzle holders, using the same cap as - ALBUZ® APE nozzles. - Air induction spray nozzle (venturi system): sprays large drops filled with ...
CoorsTek
... ground. - Designed for all types of nozzle holders, using the same cap as ALBUZ® APE / AVI (11 mm) nozzles. - The inclination of the jets improves the penetration of the vegetation. - Air ...
CoorsTek
... Main characteristics - 80° angle at 5 bar. - Air-induction hollow cone nozzle (Venturi system) spraying large drops filled with air bubbles which do not drift and explode into fine droplets ...
CoorsTek
... distribution. - Designed for all types of nozzles-holders, using the same cap as ALBUZ® APM nozzles. - Full range with 10 models on ISO flow-rates. Specific characteristics - Air-induction ...
CoorsTek
... combined with border nozzle IS 80 - Golf course Main benefits of IDTA nozzles - High drift reduction over entire pressure range (approvals pending for IDTA 120-025/03/04/05 applied ...
Lechler GmbH
Features - Air-aspirating flat spray nozzle - Nozzle sizes 01 through 03 - Pressure range 2.0 to 20.0 bar - Flow rates see page 32 - Heavy-duty, chemical-resistant ceramic - One-piece nozzle ...
Lechler GmbH
Features - Flat spray nozzle - Nozzle sizes 02, 03, 04 - Pressure range 2.0 to 20.0 bar - Highly wear-resistant and chemical-resistant ceramic - One-piece nozzle, with removable ...
Lechler GmbH
Please specify:
Help us improve:
remaining