Coolers

Power: 1.25, 1.85, 2.2 kW

Coolers are used for cooling pellets. The principle of counter flow cooling is applied. Pros •Total emptying: A pneumatic cylinder opens and closes the grid completely at the end of the run to make sure no pellets ...

▶ Effective cooling system with three grids, reverse airflow ▶ Sensor adjustment mechanism according to product temperature ▶ Transparent observation window ▶ Homogeneous and rapid cooling ▶ Hot air aspiration ...

... outside the cooler itself. The pellet leveling system optimizes the uniformity of the product layer inside the cooler, increasing its efficiency and homogenizing the temperature of all the granules. ...

... cooling full, prolong material’s storage time Advanced theory of countercurrent cooling, widely applied in feed pellet cooler, such as Granulation, Expansion, extruder, expanded and so on. Octagonal section ensures ...

Power: 7.5, 0.16 kW

For cooling and sieving pellets at the press outlet CONSTRUCTION inlet hopper with electronic level detector 2 cooling columns with internal louvred grids spaced 1.5 mm apart EXTRACTOR- SIFTER driven by 2 0.16kW (0.25 HP) vibrating ...

... fitted with external strainer to flush, which is very easy to keep clean. Hydrocooler can be connected to an existing cooling system with a special coaxial evaporator. The hydrocooler capacity is dependent on the capacity ...

Reduce crop temperatures down to 2⁰C Rapid cooling (precooling) soon after harvest to remove field heat from produce is essential for obtaining maximum shelf life. Hydro cooling is considered one of the most effective means of cooling ...

Power: 75 kW

The Allround VP hydrocooler is designed to cool down the produce, especially carrots, before transportation. This dramatically increases the shelf-life of the produce. Allround VP is able to deliver hydrocoolers that are capable of ...