Drainage gates

.A spring automatically opens the valve when the pressure drops below 0,2 bar .Used to drain out the piping after watering has been completed. Applications Residential irrigation

DN: 40 mm

... connection, IP 65 by using a mounted connector. The valves can be equipped with a manual emergency override, to ensure the drainage of tanks even in the case of a voltage breakdown. Valve housings made of PPE are ...

DN: 40 mm

2/2-way direct acting dump valve of nominal diameter DN 40 for controlling low aggressive liquid media, such as cleaning or disinfection agents, direct acting with normally open operation mode NO (normally open). Valves of this type ...

DN: 50 mm

3/2-way direct acting dump valve of nominal diameter DN 50 for controlling low aggressive media, such as cleaning or disinfection agents. Valves of this type have a medium separated control pressure chamber. They can be manufactured ...

DN: 50 mm

... connection, IP 65 by using a mounted connector. The valves can be equipped with an emergency manual override, to ensure the drainage of tanks even in the case of a voltage breakdown. Valve housing made of PPE are ...

DN: 50 mm

2/2-way direct acting dump valve of nominal diameter DN 50 for controlling low aggressive liquid media, such as cleaning or disinfection agents, direct acting with normally open operation mode NO (normally open). Valves of this type ...

DN: 40 mm

2/2-way direct acting drain valve of nominal diameter DN 40 for controlling low aggressive liquid media, such as cleaning or disinfection agents. Valves of this type are medium separated having a single chamber valve body with the ...

DN: 40 mm

2/2-way direct acting drain valve of nominal diameter DN 40 for controlling low aggressive liquid media, such as cleaning or disinfection agents. Valves of this type are medium separated, having a single chamber valve body with the ...

DN: 40 mm

3/2-way direct acting dump valve of nominal diameter DN 40 for controlling low aggressive media, such as cleaning or disinfection agents. Valves of this type have a medium separated controll pressure chamber and can be manufactured ...

DN: 0.102 m - 1.524 m

WATERMAN F-55 HEAVY DUTY FLAP GATES are designed for applications with maximum 55 foot seating heads. Each gate is custom-made to job requirements. Key Features: - Sizes 4″ to 108″ diameter - Automatic ...

DN: 101.6 mm - 1,524 mm

WATERMAN F-25 MEDIUM DUTY FLAP GATES are designed for applications with maximum 25 foot seating heads. Each gate is custom-made to job requirements. Key Features: - Sizes 4″ to 60″ diameter - Automatic ...

DN: 304.8 mm - 2,133.6 mm

... AF-41 ALUMINUM DRAINAGE (FLAP) GATES offer a corrosion-resistant, rust-proof automatic drainage gate designed for use with aluminum corrugated pipe or HDPE. The aluminum ...

DN: 152.4 mm - 609.6 mm

... and construction assures years of maintenance-free operation. Waterman F-10 Drainage Gates are currently in extensive use on federal, state, and municipal projects for drainage, waste ...

DN: 100 mm

This hydrant is designed for carrying water in the pressure irrigation system to irrigations areas. Manufacturing is ensured according to desired outlet pressure, Flow rate and quantity of nozzles. Nozzles on a “Type A” irrigation hydrant, ...