Field cultivators with rollers

... provides savings in irrigation. In standard, it is produced as roller and without roller. Depending on usage purpose and optionally, earthing up unity can be connected to the behind tools without roller. In ...

Width: 3 m
Working depth: 35 cm

The new KRATOS 3 cultivator made by Mecanica Ceahlau in a 100% Romanian concept, with a working width of 3 m and a working depth of up to 35 cm is intended for scarification or soil sanding works on the entire surface, ...

Width: 3,700, 2,700, 3,200, 1,700, 2,200 mm
Working depth: 300 mm

Tubular Frame Cultivator is a secondary soil tillage machine is mounted to tractor's hydraulic lifting unit and universal three point linkage system, hydraulically mounted type machine. Therefore transportation to the ...

Width: 170, 220, 270, 320, 370 mm
Working depth: 40 mm

... the rows of plants when the required settlements are made. It can provide more savings and will survive for many years. Cultivator keeps the moisture soil for it does not process the soil by overturning and it hoes rows ...

Width: 2.5 m - 6 m
Working depth: 5 cm - 20 cm

... the Cultipass cultivator and its Quick Roller Swap system is available! Cultipass can operate at shallow or deep depth, always with a high quality result. The patented Quick Roller ...

Width: 3,000 mm - 6,000 mm

... can prepare the soil after ploughing during one run whereas the soil is processed not only on the surface but in the whole field.

How do you improve on a cultivator that combines a rugged design and efficient options? Add unequaled terrain following. The Penta 300 series cultivators are built with the same design and quality ...

Width: 3.6 m - 9.2 m
Working depth: 80 mm

... has front and back supporting rollers, leveler and coulters (ploughshares). Front roller crumbles clods, then leveler collates the surface. 40 mm. width coulters with spring tines are placed between leveler ...

Width: 1,000, 2,050, 2,250, 2,750, 3,250 mm
Working depth: 500 mm

Cultivator (working depth 500 mm) ■ Screwable and in width adjustable tine mounting ■ Tine thickness: 25 mm ■ Shares can be replaced using bolt fixing ■ Standard share width 60 mm ■ Cat. 2 linkage ■ ...

Working depth: 3 cm - 8 cm

Germinator or complex seeding preparation machine finishes complete operation in one pass and prepares soil surface for seeding. Beside savings in time and fuel it also evades unnecessary soil compaction. It is transported carried, folded ...

Width: 2 m - 4 m
Working depth: 5 cm - 20 cm

The KP cultivators are suitable for soil preparation after plowing given an extra deep pass and intensive mixing of residues as they prepare the soil for sowing. By selecting the double Flex spring 32X10 or the 45X12 ...

Width: 4, 5, 3 m
Working depth: 40 cm

High performance tine mounted cultivator, available in 2 or 3 rows, with a width of work of 3.00 to 6.00m that allows working up to 40cm deep. A simple, lightweight, spacious and robust frame construction offers impressive ...

Width: 2.35 m - 12 m

The Hatzenbichler cultivator are established since more than 60 years on the market. Through years of experience and constant modification of the cultivator it´s become a perfekt machine for sedbed ...

Width: 6,100 mm - 18,200 mm

Presowing cultivators "Rubin" - a new development of CB Promzapchast aimed at import substitutionwidely sufficing hook-on presowing cultivators companies "PÖTTINGER", "KOCKERLING", "Hatzenbichler". Many ...

Width: 3 m - 8 m

... seedbed cultivator EUROPLAN II is perfectly suited for seedbed preparation before sowing sugar beets, vegetables, maize and grain. The tines of the individual elements are guided accurately at the required working ...

Width: 18'00", 20'00", 22'06", 25'00", 30'00"

The 812 Trailing Maxitill is designed for greater trash clearance. From the massive main beam that runs throughout the frame to the 65x65x6 box section, the 812 is built tough for New Zealand conditions. Floating contour wings allow ...

Width: 85 cm - 205 cm
Working depth: 20 cm

Cultivator with 30x30 spiral spring and cage roller 55cm RH side inter-row blade with quick tractor couplings and mechanical emergency blade return Bulldozer-like tilling spur 4,5 - 21 - 26 cm ...

Width: 110 cm

... up to 15 cm; capable of fully tilling non-difficult ground in a single pass; efficiency improves at higher working speeds. ROLLER / for levelling the surface of the soil and breaking up clods / the helical bars ensure ...

Width: 45'00", 52'00", 62'00"

... Toolbar sets tine depth hydraulically •Tines tip up for transport and trash removal •Original Alloway crumbler baskets •Easy field transport; folds up and back •No wheel tracks •Hydraulic Down Pressure Cylinder •Replaceable ...

Width: 275, 300, 375, 400 cm

... Parallel lift as standard, rear row of tines can be lifted vertically Three point linkage Cat. 2 This cultivator can be fitted with several types of rollers for proper depth control.

Width: 1,700, 2,200, 2,700, 3,200, 3,700 mm
Working depth: 300 mm

... complete operation of other tines at the corrected depth. - Roller option are provided at the back of the cultivator to control the depth of tilling at Uniform level without spanner work. Roller ...

Width: 3 m - 9 m
Working depth: 8, 3 cm

... ø28 mm (versions 3÷4 H), •ø70-825/ø36 mm (4,5 H ÷9 H) •front string roller, ø390 mm •4-row section of SV tines •levelling skid behind the tine section •rear double string roller ø320/280 mm •rigid ...

Width: 3 m - 8 m
Working depth: 5 cm - 28 cm

... “ZORO” cultivator is available with working widths of 3 m to 8 m. The distribution of the tines over three bars of the frame guarantees that the entire field is stirred up perfectly. The special shape ...

Width: 2.25 m - 5.25 m

... under chassis: 65 cm. (Arm 30x30) -Working depth from 18 to 25 cm. -For models with manual folding or spring folding, the roller is fixed. -Hydraulic fold/unfold wings -cylinders with anti-overflow valve- (on vertical ...