Livestock gates

All Due A gates are made from bars suitably sized for their intended purpose; they are chosen and positioned based on the type of husbandry, and the farmer’s needs in managing stock flow and shed cleaning.

Due A fencing is made from bars suitably sized for their intended purpose. It is chosen and positioned based on the type of husbandry, and the farmer’s needs in managing stock flow and shed cleaning.

Electrically welded mesh panel gates fastened to posts with relevant hinges and latch. Fixed fencing with 8 horizontal rails, suitable for producing corridors or pens for outside paddocks.

Width: 270 cm - 550 cm

... the posts. The minimum required building height for this gate is 300 cm. The 'open' position gives 210 cm of free space under the gate. Heavy duty draw-up gates with a larger free ...

Width: 200 cm - 330 cm

The compact Draw-up gate Light is most suitable in situations with insufficient space for a rotating barrier. The gate is light and quick to move because of the practical locking mechanism and the ...

Width: 200 cm - 550 cm

This type of gate is suitable for easy closing of crossings during the movement of groups of animals. Barrier gate, spring support 300 - 550 cm For quick and easy closing of large crossings such ...

Width: 2.67 m - 5 m

... 3 in 1 calving gates in sizes from 8’ to 15’ ex stock - Adjustable gate available from 12' - Head locking gate separate from pen division gate - Internal gate ...

... hot dipped galvanised. Manufactured in three formats: - Fixed over wall with adjustable ends - Swinging gate over wall - Full swinging gate c/w wheel

- Cattle Grids available in following: - Heavy Duty 5’ Deep - Light Duty 4’ Deep - Heavy duty manufactured from 75mm piping - Light duty manufactured from 48mm piping - Custom made to suit opening - Heavy gauge steel construction - ...

Width: 2.2 m

Tubular temporary fence hot-dip galvanized after assembly. External structure in 38 mm diameter round posts with internal vertical reinforcement round posts of 8 mm diameter. Panel dimension is 2200x1100 H mm Packaging: ...

Width: 18, 21, 25, 28 in

... easy access to the rear of the cow for pregnancy checking or artificial insemination. The Model S04 Squeeze Chute is Priefert’s number one selling squeeze chute of all time and features the Model 91 Headgate ...

Width: 18, 21, 25, 28 in

... easy access to the rear of the cow for pregnancy checking or artificial insemination. The Model S04 Squeeze Chute is Priefert’s number one selling squeeze chute of all time and features the Model 91 Headgate ...

Width: 18, 21, 25, 28 in

... easy access to the rear of the cow for pregnancy checking or artificial insemination. The Model S04 Squeeze Chute is Priefert’s number one selling squeeze chute of all time and features the Model 91 Headgate ...

Our internal horse stable model Verden is a very practical solution with sliding doors. The clean design of this internal stable and its high safety standards are perfectly suitable for a busy working environment. We offer the model Verden ...

The Rower & Rub internal stable Hamburg combines beautiful design with functionality. By integratingthe track and roller system of the door in to the stable front, we created a clearly designed front at the highest possible safety standards. The ...

The stable fronts of the model Hannover are very elegant and functional. This stable front is available with the following door options: •Two doors - an upper and a lower door. The doors might be opened separately, and the upper door ...

Electric Gate Outrigger Pack Can be mounted in various positions on gate to prevent livestock rubbing and damaging gates. Fits 35mm vertical or horizontal pipe on ...

Seven bars, all 1 1/4" square tube Secure panel interlocking using standard upper attached drop pin Mitered upper corners for added strength and safety Loop leg on both ends Three sizes available: 8', 10' and 12' All panels are 5'6" ...

Available in Straight Tongue, Gooseneck and Bumper models Pin or ball hitch holds 32 - 1 1/4" Panels or 26 - 1 1/2" Panels Approximate weight of 640 lbs. when empty Comes with new spindles, hubs, rims, tires and tubes Covered under ...

Heavy-duty 2" square tube main frame Quick and easy access via standard slam latch Freely swinging removable gate Four sizes available: 4', 8' 10' and 12' The fullest complement of interloacking connectors 5' walk-through ...

Gates Gates are designed for all categories of animals (dairy cows, calves, heifers, bulls) and for all types of operations (production stables, farrowings, passageways, etc.). Size of the gates ...

... housing in wintering grounds. Assemblies are classified into the following parts: fence (fence panel) of different lengths, dividing door, entrance to the alley, supporting gate, sorting box, whip doors, ...

Width: 2.4, 3 m

Technical Features: - Light handling panels for cattle and horses. - Facilitate the access of animals to the handling crush or headgate. - Good support and stability through the assembly by chains. - Vertical crossover reinforcement. - ...

... without swinging a fence through a group of animals. The lifting fence is fully adaptable and it has universal applications.

-10' and 13' options -Bolt on end allows for on-site adjustment

Width: 10'00", 12'00", 14'00", 16'00"

... , bar gates fit openings of between 10 and 16 feet wide. Manufactured from the highest quality 25NB x 2.0 mm heavy galvanised tube, the smaller size gates have a central I brace and the wider gates ...

The essence of this is a 10 mm thick massive laminated panels instead of PVC board profiles, while the rest of the system is made from the well-known modular system U-profiles in stainless steel; plugs and covers - plastic ...

Width: 750, 900 mm

Farenzena Cattle Locking Yoke facilitates the animals’ contention. It is completely safe and has a disarm system that grants protection against tumbles. It is possible to set the breeding stock free individually or all at once. It is ...

Width: 3.5 m

These ones are made of tubes of 44 and 27 diam. , vertically railing , they have a height of 1m07 and can cover lengths up to 3m50. Supplied with 2 telescopic nozzles, the assembly is facilitated. - The panel : its 4 hinges renders ...

Width: 1, 1.5 m

Carmo has a series of models of wooden gates compatible with our treated lumber fences.

... barriers. Our range of partition barriers consists of: - Partition barriers - Insert-extensions - Draw gates - Group barriers - Barriers - One-way gates - Custom made

Width: 3, 4 m

Te Pari sliding gates are an excellent tool to help safely control cattle flow up the drenching race. Complete with its own frame, the gate can be easily mounted anywhere in the cattleyard race and does ...

The Round fence is the crown jewel of Molenkoning. Long years of research, development and innovation have made it possible for us to offer our customers the safest enclosure on the market. Its made out a combination ...

Width: 1.2 m - 6 m

... already installed fence systems • available for entrances of 3.60 m, 5 m or 6 m as well as mini electro gate of 1.20 m • the flexible fibre-glass sticks are covered with electrically ...

Sliding Gates Farmquip sliding gates are designed to suit many applications. The self contained gate has full strength weather it is partly closed or fully closed. It can be fitted ...

... Drop-in Gate, Drafting Gate, Winch, Drawbar, Gate Support Arms, Straps, Wheels and Toolbox S20500 - 7’ x 36” Alloy Gate x 15 S20000 - 3’ x 36” Alloy Gate ...