- Farm Infrastructure >
- Building equipment >
- Plate heat exchanger
Plate heat exchangers
Power: 25, 75, 40 W
Energy-saving air-to-water heat exchangers The H series HeatMaster models are either suspended along the side of the building at the height of the fresh air inlets or mounted by wall brackets. The main ...
The warm water operated THERMO W 400 x 600 allows a flexible arrangement of panels, is very suitable for the cost conscious remodelling of existing installations and has greatly proved itself as a reliable heating in nursery systems.
... design of this type of heat exchanger it offers higher heat transfer in a smaller package resulting in a more compact unit. Plate and Frame Heat Exchangers: These ...
Access to the spray tube is now much easier with the new designed deflector. The deflector, which was previously plugged in, had to be completely removed to reach the spray tube. The new deflector can now be folded up in the modified ...
Power: 15 kW
... fire protection and prevention. Our heat-exchanger forced air heater »Heat-X«® compact with 15 kW capacity and weighing only approx. 25 kg! If required, the heat-exchanger ...
... stainless steel and EPDM gaskets. The Plate Heat Exchanges feature galvanised floor mount brackets and the clip-on gaskets allow for easy replacement. ADVANTAGES The Waikato Milking Systems Plate ...
With a heat exchanger exhaust air is used to warm up intake air, without mixing the air. The system contributes to a uniform distribution of intake air across the building. With a heat ...
Reduces the temperature of milk entering the cooler. Advantages Allows the cooler to use 40 to 50% less electricity. Reduced tank operating time translates to increased refrigeration unit service life. The warm water is supplied ...
The Thermo-Z™ plate-style heat-exchanger is designed to recover heat from energy consuming processes up to 1500°F. Energy can be recovered and returned as process make-up ...
Heat for the greenhouse can be accomplished via overhead unit heaters, under bench heating, perimeter radiation or root zone heating. Overhead unit heaters (gas, electric, hydronic, or oil) are the least expensive to ...
Power: 60 kW
The AddAir heater/heat exchanger cuts heat consumption by 70 % compared to traditional heaters. AddAir is truely a genuine game changer in the industry. Heating with AddAir During ...
... existing installation The size (amount of plates) of the Interpac is depending on the cooling capacity and if a receiver is installed. The more plates, the more warm water can be produced, but the ...
Power: 76 kW - 585 kW
... needs. HEAT EXCHANGER USED AS PREHEATER By preheating the air before it is released into the furnace , the total oil consumption is reduced. TORNUM’s preheating coil can be connected to a hot air ...
The Plate Heat Exchanger is a device which cools milk using cold water, before it reaches the cooling tank. Immediate pre-cooling of milk ensures high quality and also assists tank’s ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Help us improve:remaining