Side-mounted agitators

• Suitable up to 8 m beneath substrate level. Deeper immersion depths on request • Horizontally adjustable +/- 25° • Vertically adjustable up to 30° through hydraulic cylinder or pinion • Authorized for ex-zone 1 within the tank • ...

• Ex-motors of rated output 11.0/15.0/18.5 kW at 200 - 400 rpm (3-phase 50 cycles) • Tube Ø 101.6 mm, ss304 or ss316 • Suitable up to 1.5 m beneath substrate level. Higher immersion depths on request • Authorized for ex-zone 1 within ...

... minimize abrasion • Giantmix FT HY only with PTO drive and without motor possible Adjustment options: The agitator is the only agitator worldwide that can be adjusted ± 30° horizontally and vertically. ...

... height adjustment of the agitator is done by means of a top link. Gas tightness: The gas-tight feed-through of the agitator pipe is attached to the film by means of an EPDM membrane with ring flanges. ...

... it is possible to operate the agitator in secondary fermentation tanks at various heights. The sealing on the agitator can also be monitored by means of an oil expansion chamber. The high quality sealing ...

... of an agitator blade diameter of 1200 m with a capacity of 22.0 kW, the PAULMICHL-Multimix agitator ensures a low-noise but nevertheless powerful transmission by means of the toothed belt (gear wheel) ...