Subsoilers with hydraulic adjustment

Width: 4,000, 3,000 mm
Working depth: 750 mm

ARES XL series are our subsoilers with high anchors, tractors with more than 300 HP. Working depth reaches 75 cm, the light under the frame is 15 cm and the entire structure is reinforced to support the high effort. The ...

Width: 3, 2.5 m

... demand). • On the rear it is possible to equip the machine with spike roller - double star roller - rear disc with manual or hydraulic movement (at demand). • Sub frame depth: 75 cm - depth working until 45 cm.

Width: 1.5, 2 m

Maulwurf I - for loosen the driving line between the asparagus lines to avoid back water less rusty asparagus less of fusarium three-points suspension for combination with our Chamäleon, Iltis or Igel third spade available Maulwurf ...

Width: 3, 4 m
Working depth: 55, 65 cm

... protection in both versions is either mechanical using shear bolts, or hydraulic. ONE FRAME, TWO EQUIPMENT OPTIONS TERRALAND TN both as a chisel plough and professional subsoiler.

Width: 300, 250, 400 cm
Working depth: 45 cm

... for deep tillage of the topsoil and subsoil to a depth of 45 cm. The subsoiler is suitable as an alternative to ploughing or any other cultivation technology. Firstly, the subsoiler gradually lifts the ...

... diving angles by means of 5 different level adjustment. The diving can be adjusted by rotary hallow combined with the subsoiler hydrolic pistons. Also, it is easy to carry it by taking it on the ...

Width: 2.5 m
Working depth: 65 cm

... of attack between 0-18 degrees • The depth adjustment for the work sections is made from the control of the tractor tie rods • Hydraulic adjustment of the working depth of the disc ...

Width: 1.6, 2, 2.5, 3 m

... a compact, lightweight subsoiler that is still extremely rugged and dynamic thanks to the new frame design. Available in sizes 1,6 - 2 - 2.5 and 3 m, it is recommended for use with tractors from 50 to 130 HP. ALPEGO ...

Width: 3, 3.5, 4 m
Working depth: 15 cm - 45 cm

Width: 1,750, 3,850, 2,450, 3,150 mm
Working depth: 650 mm

Hydro-pneumatic subsoiler has got a very heavy strong structure which can reach the best performance in every soil even in combination with high power tractors. Hydro-pneumatic safety system works in extreme conditions, ...

Width: 2.3 m - 4.87 m
Working depth: 55 cm

The POLARIS subsoiler is the hydraulic variant of the SIRIUS subsoiler, for working on difficult and demanding soils in a very fast and efficient way. Its wide clearance makes it possible ...

Width: 1,040 mm - 4,570 mm
Working depth: 550, 713, 955 mm

... 5 different depths with the levelling on the legs. The rotary rake combined with the YTAGRI subsoiler provides ease of transport with the help of the hydraulic piston.

Width: 3, 2.5, 4 m
Working depth: 10 cm - 55 cm

The new type of MEGATRON subsoiler which has been added to our production range, has been designed in every detail to be a functional machinery, easy and economical to use and maintain and to succed maximum possible results. ...

Width: 2,940 mm

The BALDAN SCB-CR Remote Control Sugarcane Subsolier is used to break up compacted deep layers. SCB-CR has 26 "cutting discs that let you work on straws, rods with automatic turn-on / turn-off system and replaceable nozzles and lump breaking ...

Width: 250, 300 cm
Working depth: 50 cm

Thanks to specially angled shanks and a robust steel frame, the Zanon subsoiler delivers uniform results at depths of up to 50 cm. Subsoiling prevents the pooling of surface water and therefore improves the soil’s ability ...

Working depth: 40 mm - 1,000 mm

with safety bolt RD Outfits hydraulic jack for the third point for RD 100/120

Width: 0.8 m - 2.5 m

The GRUBBER VINEYARD EV-10 is the only one equipped with a new extensible body. This new conception allows to make a work in the center of the row, from a minimum of 80 cm till a maximum of 130 cm. The new system of vertical lift allows ...

Width: 250, 300, 400 cm
Working depth: 30 cm - 55 cm

Product Description In the requirement of breaking the “plow-pan”, “natural-pan” or “traffic pan” at the soil we need to work deeper. EJDER and KUNDUZ series Chiesels are used on 30-55cm depth of the soil to break the “pan” and ...

Width: 270, 300, 375, 525, 675 cm

Subsoiler with larger working width. Frame clearance of 83 cm. For tractors of 170 till 450 HP. Standard with category 3 three point linkage. 3 Types of tines (ST, K und KG thickness 30mm). Of 7 till 11 tines ...

Width: 2.8, 3.7, 2.4 m
Working depth: 35 cm

... rubber support wheels •bracket for roller •furrow type C with brackets •PTO shaft application system (devided axle) •hydraulic coupler – lifting capacity 4 000 kg (version B) •Pipe roller ø600 mm •Spring roller ...

Width: 2.6, 2.55, 3.2, 3 m
Working depth: 55 cm

•Three point linkage cat. : 3° - 3°N - 2° •Tip with quick release device •Wear resistant shank protection •Adjustable inter shank distance •Hitch pins category 3°