Crop sprayer nozzle tester S001

In order to check whether a nozzle is properly functioning, it is necessary to measure the flow. If one determines a flaw in the flow rate, then it will be necessary to look for the cause of it, either within the nozzle itself or in other parts of the sprayer. The nozzle tester is a device that can define the flow rate of all types of nozzles mounted on sprayers with an accuracy of 1%. It is a hand held device to quickly and accurately check the performance and wear of nozzles but can also be used for calibration purposes. SPECIFICATIONS .Only mobile device that is JKI (G 2028) approved for measurement of absolute flow values. .Precision of 1% from 0.10 l/min up to 8 l/min. .Delivered with 2 different cones, one for classic nozzles (range of 0.30 l/min up to 8 l/min) and one for air-induction and Air-Tec nozzles (range of 0.5 l/min up to 1.6 l/min). The latter can also be used for other types of nozzles. .Data of 10 sets of 100 nozzles can be stored in the memory of the monitor and then be transmitted to a PC. .A measuring report of the nozzles of a complete inspection can be created on a PC with the complementary software. .A tripod for mounting the measuring unit is included to allow measuring the flow rate of nozzles mounted on orchard, air blast (not downwards oriented nozzles) and row sprayers. .Can be supplied with a hand-held adapter or with spiral hoses and universal nozzle adapters. .Can be used for vertical spray booms as in asparagus, green houses etc. .Possible to equip with different adapters to measure the flow rate of other types of spraying nozzles, installed on different machines as potato planters, row sprayers etc.