Forklift truck TH-160

TH-160 forklift truck It lifts 1,600 kg 4 metres high. Maximum stability, low maintenance costs and the lowest litre-per-hour fuel consumption on the market. The TH-160 forklift truck is a hydrostatic model in terms of both elevation and movement. It can lift a 1,600-kilo load up to 4 metres. This is a medium-sized model with four-wheel drive traction for moving across muddy terrain with the possibility of deactivating the 4×4 drive to change to two-wheel traction, thereby saving on fuel and tyre wear. The TH-160 is excellently designed with respect to weight distribution. It is so well balanced that it does not need a large counterweight like other forklifts with the same capacity. This is, without doubt, the key factor of this model in particular and the TH series in general. Suitable weight distribution means putting the engine under less stress and, as a result, cuts fuel spending. In addition to distributing the weight, the wheels are quite big: 10.5/75-15.3 at the front and 8.0/75-15.3 at the rear; almost equal. The fact that the width of the machine is 160 cm means that it is an extremely stable vehicle capable of moving loads over any ground conditions. The forklift is driven by a three-cylinder 33.2 horsepower Perkins engine. The ratio of power transferred to the ground in proportion to weight is exceptional. This become apparent after driving the TH-160, which performs superbly under any conditions.