Odour neutralizing and masking product
BIONEUTRODOR, a dual action to:
avoid and stop gaseous release process.
chemically act in presence of the gas causing bad odours (H2S, ammonia, sulphured organic compounds)
=> BIONEUTRODOR neutralizes odours before, during and after liquid manure spreading.
BIONEUTRODOR is made with ingredients which do not pollute and are biodegradable.
BIONEUTRODOR has been tested in accordance with AFNOR norm NF X 43-103, advised by the French Ministry of Ecology and Sustainable Devlopment.
IN SLURRY / WASTE
The pure product is used at the rate of 80 à 150 mL/m3 of slurry. Reference dose is 100 mL/m3 of slurry.
During storage
BIONEUTRODOR can be incorporated into the slurry pit. It should be spread within 48 hours after incorporation for good efficiency. Product should be mixed with a stirrer. Pumping will also homogenises BIONEUTRODOR in the tank.
Slurry can then be immediately spread.
During pumping
•Manual mode
The product is poured in the suction pipe or pumping cone, connect the pipe on the tank and pump.
•With injector
Set up the injector on the suction pipe or pumping cone, introduce the injector flexible into the BIONEUTRODOR drum, connect the pipe on the tank and pump.
•With dosing pump
Set up the injector on the tank, with the container for BIONEUTRODOR. Automatic dosing at pumping.
ON SOLID EFFLUENTS / WASTE
BIONEUTRODOR may also be used, first diluted with water at the rate of 0.5 to 1 %, for spraying on solid effluents (poultry droppings or wastes) at storage or after their spreading on fields.
5L, 20L, 30L and 200L drums