Towed manure spreader N-235/1

horizontals beaterssingle-axle

.Wall height ~ 500 mm with thickness 2mm – hot-dip galvanised. .A2HS adapter – 2 horizontal finger drums, hot-dip galvanised .Exchangeable floor made of hot-dip galvanised flat sheet .Straight drawbar to be connected to the lower agricultural hitch with eye ø 50mm, hot-dip galvanised .Mechanical drive of the conveyor from the PTO shaft with 9-step adjustment .Hot-dip galvanised adapter cover .Hot-dip galvanised front guard, meeting safety requirements .Welded drawbar hitch diam. 50 .Hot-dip galvanised bottom frame made of metallurgical 160 channel sections .Folding drawbar support .Hot-dip galvanised conveyor chain, link diameter 11 mm .Exchangeable, hot-dip galvanised conveyor strips made of 50x25x3 profile .Parking handbrake with crank .Star wheels made of spheroidal graphite iron .Lighting installation connector cable with 7PIN 12V plug .Lighting 12V, homologated, bulb rear lights, LED front lights, contour reflectors .Single-line pneumatic brake system .New 10.0/75-15.3 wheels .Rear axle of a reputable ADR company, full beam with a square section of 70 mm, brake 300×60, front axle CynkoMet, unbraked, torsion with crossovers .Two wheel chocks placed in galvanised pockets .Suspension – rocker arms with rubber buffers ADDITIONAL EQUIPMENT .Hot-dip galvanised volume extensions with rear gravity fl ap – height 500 mm * (* it is not possible to mount the extensions together with the adapter) .Rear wall, 500 mm high, hot-dip galvanised (board, mounted in place of the adapter) .Defl ector (for A4VS adapter) .Hydraulic rear wall (in front of adapter) .A4VS adapter – 4 inclined vertical worm drums with discs and lime board, hot-dip galvanised .Full LED lighting