Stationary soil mixing machine

automaticprocessingcoir

Now a coir block feeder system that will greatly reduce labor and provide a steady flow of material to keep the Coirbuster at maximum output. The Coirbuster system is a patented design that gently decompresses the blocks apart with minimum damage to coir fibers. Unlike hammer mills that use high RPM the Coirbuster moves the block material in a figure eight cycle that gently rubs itself apart. All material goes through a sizing screen( size to be determined by customer) to a 10 foot auger that moves material to the 20 foot hydration auger. The material can be ready for use at the discharge point. Coirbuster Specifications 230 volt 3 phase draws 68 amps Decompresses 1 pallet of coir 4 or 5 to 1 ratio 12x12x6 blocks in approximately 12 minutes 20 foot x 14 inch hydration auger with 2 each 1 inch water pipes with on/ off valves 230 volt 3 phase draws 22 amps Coir block feeder unit will provide a steady flow of blocks to keep the coirbuster at maximum output. 230 volt 3 phase motor on the chain conveyor draws 6.8 amps 230 volt 3 phase motor on the leveling drum (16 inches in diameter) draws 22 amps Hydraulic lift gate volt 3 phase draws 6.8 amps Total amp draw on system 125.6 amps Note decompression rates may vary depending on moisture content, block size and compression rates.