OverviewBy combining an E-Ref logger with a reference module, you obtain precise measurements of operating conditions at photovoltaic plants: effective irradiance, front and rear irradiance, and module temperature. The system is designed for direct integration with SCADA via ModBus/TCP.
Product functionThe E-Ref measures the short-circuit current (ISC) and open-circuit voltage (VOC) of the reference module, computes the corresponding irradiance and cell temperature, and exposes these values in ModBus registers. Models are available for single-sided reference modules (E-Ref/01) and double-sided reference modules (E-Ref/03).
Product family / Available references- E-Ref / 01 (single-sided reference module logger)
- E-Ref / 03 (double-sided reference module logger)
Associated products and accessories- Soiling sensors (DUST family) for monitoring soiling and optimizing cleaning
- Switch (prevents continuous short circuits in reference modules during Isc measurement)
- Reference cells
- Cables
- PT1000 sensors
- Other accessories for PV measurement and connectivity
Table — Technical data (summary)Parameter — E-Ref/01 — E-Ref/03
Maximum voltage — 60 V — 60 V
Maximum current — 20 A — 20 A (Ch 1 & 2) & 5 A (Ch 3)
Number of inputs — 1 — 3
Measurement resolution — 1 mV / 0.3 mA — 1 mV / 0.3 mA (Ch 1 & 2) & 0.1 mA (Ch 3)
Communication inputs — ModBus/TCP — ModBus/TCP
Communication ports — RJ45 — RJ45
IP protection — 20 — 20
Mounting — DIN rail — DIN rail
Power supply — 12/24 Vdc — 12/24 Vdc
Power consumption — 30 mA — 60 mA
Dimensions — 54 × 90 × 58 mm — 90 × 90 × 58 mm
Weight — 90 grams — 90 grams
NotesAll measured values are stored in ModBus registers and can be accessed by a central SCADA system via ModBus/TCP. The E-Ref implementation supports independent calibration of the reference module and the logger.