HYPRO 450 XL is a versatile, strong, simple and easy-to-manoeuvre tractor processor. It is a highly-valued and popular all-round machine that functions equally impressively for small final thinnings as first thinnings. HYPRO 450 XL has High and Low speed, which enables a very high feed rate, 5m/sec, in high speed mode which provides major benefits when operating in forest with smaller trees. The low speed mode has a feed rate of 3.5 m/sec and a very high starting torque combined with a raw strength for use when operating in forest with larger trees.
The machine has a maximum opening diameter of 45 cm and a total delimbing diameter from 40 cm down to 5 cm, it also has a fully hydraulic and very powerful high-speed cutting capacity that cuts without splitting. The processor is equipped with a separate hydraulic system with its own pump and tank where the pump is connected directly to the tractor’s power take-off or via a power transmission shaft with the pump mounted on the processor’s frame as an alternative design. HYPRO 450 XL has a double articulated joint as standard, which enables the machine’s working position to be moved sideways, with cut timber thus always falling outside the tractor’s wheels. It enables timber to be sorted into different piles as early as the processing stage, and also means that the piles of timber do not have to be moved after processing. This also ensures considerably simpler and more effective timber haulage. The machine’s absolutely superb hydraulic winch is manoeuvred as standard with professional digital radio equipment but can also be manoeuvred via the valve’s hand lever.