With the automatic flushing-system your drinking system is flushed by itself. With the LUBING Touch Control LCW you can flush up to 10 drinking lines separately. This system can be easily retrofitted into existing drinking systems.
With the LUBING controller (1) the duration and timing of flushing can be adjusted to individual needs. With that you can adjust the time required for a sufficient flushing depending on the length of the drinking lines and thus avoid water waste also during the flushing.
Each drinking line is flushed separately, but it is also possible to flush several drinking lines at the same time by clamping them to the same contact.
The actuator of the pressure regulator Optima E-Flush (2) is connected directly to the controller. If necessary, the number of drinking lines (standard: 10 drinking lines) can increased by expansion boxes as often as you need, with 8 drinking lines per box.
For the automatic flushing a new breather unit (3) was developed. This is fastened to the end of the drinking line. The height of the water column is shown by a red ball in the riser. Through the drain kit (4) the flushing water is led to the drainpipe (5).