Liquid feed additive steadyFOG

Product overview
nutriFOG® is a registered special fertilizer formulation designed for fogging application in greenhouses. It reduces premature water evaporation and prevents premature crystallization of the fertilizer components. nutriFOG® supplies essential nutrients chelated for improved foliar uptake and can be mixed with common plant protection products after compatibility checks.

Dosage
Apply 250 ml nutriFOG® mixed with 1.5–2.5 l water per 1,000 m² at intervals of at least 5 days. In specific cases the dosage may be increased to 500 ml/1,000 m². Do not exceed 1.5 l nutriFOG®/1,000 m² per month in total. If wettable powders (WP) are added, keep concentration ≤ 80 g WP per liter of water. Adjust water volume if necessary and follow the fogger manufacturer's instructions and any label directions of co-applied products.

Preparing the fogging liquid
Mix the plant protection agent with water first, then add nutriFOG® while stirring. For any unfamiliar biocide or tank mix, prepare a small trial solution to verify compatibility. Some combinations may form an insoluble paste. Do not mix nutriFOG® with biocides that prohibit addition of other chemicals.

Application instructions
When applied together with plant protection products, use a gas mask with A2-B2-P3 filter. Distribute fog evenly over the crop while walking backwards. Stationary fogging is permitted only with fan-type foggers or additional fans running at low speed (< 1,000 rpm). Machines with brass nozzle systems are not suitable as brass is not resistant to nutriFOG®. Operate fogging in the evening and avoid strong night-time temperature drops.

Prevention of accidents
Do not enter the treated greenhouse while fog persists. Ventilate treated areas for at least one hour before re-entry.

Precautions
Keep the product, residues and emptied containers away from water bodies. Use up residual quantities where possible. Dispose of empty containers via municipal waste or rinse thoroughly before disposal. After handling, wash hands and any exposed skin thoroughly with water and soap. In case of eye contact, rinse immediately with plenty of water. In case of illness or accident, seek medical attention and, if possible, present this label.

Storage
Store in the original container. Keep out of reach of children and away from foodstuffs. Protect from drying, contamination and sunlight. Keep container tightly closed. Do not store below 4°C or above 40°C.

Liability
The information reflects our current knowledge and is intended to describe product use. Correct storage and application are beyond our control; we warrant product quality at the time of delivery only.

Technical specifications

• Brand: pulsFOG
• Product name: nutriFOG® (special fertilizer for fogging in greenhouses)
• Product code: A00127
• Intended equipment: pulsFOG® thermal and cold foggers with stainless‑steel nozzles (brass nozzles not suitable)
• Primary application: Greenhouse fogging; can be admixed with common plant protection products after compatibility test
• Dosage: 250 ml nutriFOG® + 1.5–2.5 l water per 1,000 m² every ≥5 days; up to 500 ml/1,000 m² in specific cases; monthly total ≤ 1.5 l/1,000 m²
• Compatibility with wettable powders: ≤ 80 g WP per liter of water
• Preparation: Mix plant protection agent with water first, then add nutriFOG® while stirring; perform compatibility test for new mixes
• Safety: Wear gas mask with A2-B2-P3 filter when combined with plant protection products; ventilate treated areas for ≥1 hour before entry
• Storage conditions: Keep in original container; protect from frost and sunlight; recommended storage temperature 4°C–40°C