Rear-mount mower SILVERCUT DISC 300 S FPC

disc14 blades7 discs

Overview
Conditioning (FPC/FSC) accelerates wilting and drying, helping to preserve nutrients, reduce weather risk and shorten harvesting time for improved forage handling.

Main features

• Specially shaped discs in 4 mm wear‑resistant steel for smooth forage flow and extended component life.
• DDSS (disc drive safety): intermediate flange with four brass shear pins that protect the cutterbar by shearing in overload and are quick to replace.
• Disc drive axis mounted to the cutterbar with double sealed bearings to withstand higher loads and prolong cutterbar life.
• QCS spring blade holders allow blade retraction on impact; blade holders are individually replaceable for fast maintenance.
• Wear skids in wear‑resistant steel with large surface area protect the cutterbar and divert soil and sand to reduce forage contamination.
• Selectable disc rotation to suit subsequent forage processing and harvesting strategy.

Systems and kinematics

• Hydro‑pneumatic suspension (HPS) for precise ground following; relief rate adjustable before or during mowing.
• S‑FLOW hitch and cutterbar mounting for fast system response, uniform ground pressure and a clean cut.
• Collision Safety System (CSS) — mechanical collision protection.
• Hydraulic stabilisation of the cutterbar for improved stability in transport and work.
• Finger conditioner options: FPC or FSC for faster conditioning when specified.

SILVERCUT DISC 300 S FPC — key data

• Working width: 2.9 m
• Nr. of discs: 7
• Nr. of blades: 14
• Weight: 1310 kg
• Power req.: 60/80
• Capacity: 3.5 ha/h
• Transport width: 1.86 m
• Transport height: 3.64 m
• Hitch: 3‑point linkage Cat. II and III
• Driveline: PTO input with slip and freewheel clutch; double universal joint; angle drive
• Hydraulic connection: 1x single‑acting (1SA), 1x double‑acting (1DA)
• Suspension: Hydro‑pneumatic
• Collision Safety: CSS — mechanical
• Disc Drive Safety: DDSS with 4 brass pins
• Blade Change: QCS — Quick Change System
• Other: Spare blades and safety brass pins; additional central wear skids

SILVERCUT DISC 300 S FSC — key data

• Working width: 2.9 m
• Nr. of discs: 7
• Nr. of blades: 14
• Weight: 1370 kg
• Power req.: 60/80
• Capacity: 3.5 ha/h
• Transport width: 1.86 m
• Transport height: 3.64 m
• Hitch: 3‑point linkage Cat. II and III
• Driveline: PTO input with slip and freewheel clutch; double universal joint; angle drive
• Hydraulic connection: 1x single‑acting (1SA), 1x double‑acting (1DA)
• Suspension: Hydro‑pneumatic
• Collision Safety: CSS — mechanical
• Disc Drive Safety: DDSS with 4 brass pins
• Blade Change: QCS — Quick Change System
• Other: Spare blades and safety brass pins; additional central wear skids

SILVERCUT DISC 340 S FPC — key data

• Working width: 3.25 m
• Nr. of discs: 8
• Nr. of blades: 16
• Weight: 1394 kg
• Power req.: 68/90
• Capacity: 4 ha/h
• Transport width: 1.86 m
• Transport height: 4.00 m
• Hitch: 3‑point linkage Cat. II and III
• Driveline: PTO input with slip and freewheel clutch; double universal joint; angle drive
• Hydraulic connection: 1x single‑acting (1SA), 1x double‑acting (1DA)
• Suspension: Hydro‑pneumatic
• Collision Safety: CSS — mechanical
• Disc Drive Safety: DDSS with 4 brass pins
• Blade Change: QCS — Quick Change System
• Other: Spare blades and safety brass pins; additional central wear skids

SILVERCUT DISC 340 S FSC — key data

• Working width: 3.25 m
• Nr. of discs: 8
• Nr. of blades: 16
• Weight: 1454 kg
• Power req.: 68/90
• Capacity: 4 ha/h
• Transport width: 1.86 m
• Transport height: 4.00 m
• Hitch: 3‑point linkage Cat. II and III
• Driveline: PTO input with slip and freewheel clutch; double universal joint; angle drive
• Hydraulic connection: 1x single‑acting (1SA), 1x double‑acting (1DA)
• Suspension: Hydro‑pneumatic
• Collision Safety: CSS — mechanical
• Disc Drive Safety: DDSS with 4 brass pins
• Blade Change: QCS — Quick Change System
• Other: Spare blades and safety brass pins; additional central wear skids

Technical specifications

• Discs: specially shaped, 4 mm wear‑resistant steel
• Disc drive protection: DDSS with 4 brass shear pins
• Blade holders: QCS spring holder with retract function on impact; individually replaceable
• Suspension: Hydro‑pneumatic suspension (HPS) with adjustable relief
• Collision safety: CSS mechanical system
• Conditioning options: Finger conditioner FPC or FSC
• Hitch: 3‑point linkage Cat. II and III
• Driveline features: PTO input with slip and freewheel clutch, double universal joint, angle drive
• Hydraulic: 1x single‑acting (1SA) and 1x double‑acting (1DA) required
• Transport dimensions: transport width ~1.86 m; transport height varies by model (~3.64 m to 4.00 m)