Rear-mount mower SILVERCUT 380 S
disc18 blades9 discs

rear-mount mower
rear-mount mower
rear-mount mower
rear-mount mower
rear-mount mower
rear-mount mower
rear-mount mower
Add to favorites
Compare this product
 

Characteristics

Mounting
rear-mount
Technology
disc
Number of blades
18 blades
Number of discs
9 discs
Other characteristic
PTO-driven, for tractors
Working width

3.67 m
(12'00" )

Power required

80 ch
(80 hp)

Swath width

Min.: 2.2 m
(7'02" )

Max.: 2.6 m
(8'06" )

PTO speed

1,000 rpm
(6,283.2 rad.min-1)

Weight

1,140 kg
(2,513.3 lb)

Description

The construction of the SILVERCUT DISC 380 S mower ensures optimal power transmission and efficient mowing. The mower follows the ground perfectly and provides complete control over mowing, regardless of the complexity of the terrain. SEQUENTIAL LIFT OF CUTTER BAR - SL Hydraulic stabilisation (HS) enables the sequential lift (SL) of the cutter bar. The inside of the cutter bar is lifted first, and then the outside of the cutter bar. DIRECT DRIVE Direct drive to the first disc via a PTO shaft, angle drive and double PTO joint. COLLISION SAFETY SYSTEM - CSS The collision safety system (CSS) is released immediately in the event of a collision with an obstacle. The special position of the hinge enables the cutter bar to move simultaneously backward and upward. After colliding with an obstacle, the cutter bar automatically returns to the operating position. EXCELLENT ADAPTATION The hydropneumatic suspension system (HPS) ensures excellent adaptation to the ground and thus a precise cut and clean forage on all terrains and in all conditions. The relief rate can be easily and quickly adjusted before or during mowing. SAFE TRANSPORT Linkage with a safety transport system separated from the cutter bar partial lifting block allows good manoeuvrability when turning at the headlands. TRANSPORT AND STORAGE The transport position of the mower is 120° behind the tractor. In the same position, the mower can be stored on the stand (optional) in an area of 3,2 m2. Attributes Working width:3.67 Number of discs:9 Number of blades:18 Blade dimensions:110x48x4 Discs rotation speed:3000 PTO rotation speed:1000 Weight:1140 Required Tractor power:60/80 Capacity:4.50

Catalogs

No catalogs are available for this product.

See all of SIP STROJNA INDUSTRIJA d.d.‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.