video corpo

Silo sweep auger SF205

silo sweep auger
silo sweep auger
Add to favorites
Compare this product
 

Characteristics

Options
for silos

Description

SØBY has developed a sweep auger that strikes the perfect balance between robustness and a lightness in design – and whose power supply will never cause any trouble for its durability. The sweep auger from SØBY has been developed with a focus on durability. That is why the design is neither too heavy and industrial, nor too light and fragile – it strikes the perfect balance. Moreover, the power supply is designed to enter the center of the sweep auger via a rotary actuator. This ensures that the sweep auger can keep turning in the silo without the cable becoming twisted or damaged. Below you can see further technical information about our new product: . The sweep auger comes as a Type SF205 (the same sweep auger as SS205 and ST205) with an gear ration of 1:15 for a capacity of up to 40 t./hour and an exchange of 1:10 for a capacity of up to 60 t./hour .It also comes as a Type SF254 (the same sweep auger as SS254 and ST254) with an exchange of 1:10 for a capacity of up to 100 t./hour .The sweep auger is available in lengths from 2,76 m. up to 8,7 m. – i.e. up to 18 m. in silo diameter in length intervals of 0,25 m. .It is comprised of a drive section, extension sections of 2 m., 1 m., 0,5 m., and 0,25 m., as well as an end section with drive wheels .The position of the sweep auger at the center well can be adjusted by ± 0,1 m. .The sweep auger is pulled by a 2-pole electric motor with 2800 revolutions per minute and the above-mentioned exchanges .The extensions are a square construction of galvanized sheet with intermediate bearings for the auger, and a sheet facing the bottom of the silo.

Catalogs

No catalogs are available for this product.

See all of SOBY‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.