Grain dryer TF

tower

Tornum TF the flexible dryer Quickly switch between batch drying and continuous drying. Tornum TF is the flexible dryer where you can best match the grain and quantity, while retaining the quality. With TF, you have two driers in one. Choose between continuous drying or batch drying depending on the conditions. A Tornum TF dryer also runs at low pressure. All of the drying air is sucked through the dryer via a fan that is sized according to the size of the dryer and the heat source. A low-pressure dryer generates significantly less dust in the area around the dryer than a so-called high-pressure dryer, which also eliminates the risk of condensation in the grain zone, pipes and elevators. When starting continuous drying, there is always a “starting pause” before the dryer starts working independently. The advantage of continuous drying grows with the volume of grain. In the Continuous drying mode, you can control the dryer using the Tornum IDC system, which measures the moisture content of the incoming and outgoing grain. For smaller volumes or for grains to be dried at a low temperature over a long period of time, choose the Batch drying mode. In Batch drying mode, control is based on either weight, time or temperature, depending on what works best for you. – TF can be easily switched between continuous drying and batch drying using motor-controlled shutters that are controlled via Tornum’s control system, for example. This allows the dryer to be ready in an instant after completing continuous drying.