Feed granulator

heavy-duty

Reliable and economical, TOY Group granulation units are designed and manufactured with rigour to best and sustainably meet your needs. With simple use, they integrate into your production process for quick profitability. TOY Group offers 7 custom configurations – with or without a crumbleter – for speeds of 0.4 to 0.7T/H up to 10 to 12 T/H. See the details below and check with TOY Group to design your food granulation unit. TOY Group’s typical feed granulation unit is made up of the following equipment: Granulated press: From 2X7.5 to 2X75 kW (depending on your installation capacity). Mixer for water, steam or molasses. Compacting material. The product is transported through a dimmer Archimedes screw to the blender. Steam and/or molasses are injected into the blender. This mixture goes down into the chain through a feeding bowl to the compression set. Volume of the material is reduced by 4 and the pellets obtained have a temperature close to 100°C. The set is mounted on a steel frame with anti-vibration studs. The compression set consists of a fast bridle-fixing and dismantling chain. A pellet receiving pan equipped with two adjustable pellet-cutting devices then ensures the evacuation of the finished product. Cooler: Located outside the granulating press, the cooler is a receiving tank of the hot pellet. Cooling is done by venting air at room temperature. The hot pellets are deposited from the top of the tank and the cooled pellets are evacuated in the lower part. Allows pellets to retain shape and hardness. Prevents the development of mould.