Biopolymer plastic plant stake

compostable

Product overview
Turfquick Biodegradable Stakes — optimize mat and net anchoring with a compostable consumable that removes plastic from the jobsite. Fast deployment, robust holding power, and natural breakdown; ergonomic form with clean penetration and stable anchoring. 100% Biodegradable • PLA/Starch* *Indicative composition; batch-dependent. See technical datasheet for details.

Value propositions

• Frictionless installation: ergonomic form, clean penetration, and stable anchoring accelerate time-to-install and reduce rework.
• Total eco-compliance: biodegradable/compostable per EU guidance to reduce plastic footprint and streamline environmental audits.
• Field-proven performance: optimized geometry grips mixed soils; holds under irrigation and wind; high retention on gentle slopes.

Key use cases

• Anchoring Turfquick blankets/rolls
• Erosion control
• Landscaping & gardening
• Slope revegetation
• Sensitive urban areas

Technical specifications (table)
Parameter — Value
Material — Compostable biopolymer (PLA/Starch)
Lengths — 100 mm (150 mm, 180 mm on request)
Color — Natural / Green
Degradation time — 12–24 months* depending on soil and moisture conditions
Service temperature — -10 to 50 °C
Packaging — Recyclable cartons with lot/date labeling
*Indicative values; refer to per-lot datasheet.

Compatibility

• Turfquick blankets/rolls and light netting
• Soils: loam, sand, light clay mix
• Moisture: regular irrigation / rainfall

Installation — 4-Step Installation

• Prepare the ground and lay out the blanket/roll. Grade level, remove debris, and ensure full substrate contact to de-risk tenting.
• Place stakes every 30–50 cm along perimeter and overlaps. Increase density on edges, seams, and slope transitions for higher retention.
• Drive flush with a rubber mallet; avoid over-penetration. Seat heads level with the surface; do not deform the stake body.
• Start irrigation; inspect and reinforce wind-exposed zones. Post-install QA within 24–48 h; add stakes where uplift is observed.

Sustainability highlights

• 0% residual plastic on site (when used as biodegradable consumable)
• ~30% reduction in post-project removal time
• Recyclable packaging with lot/date labeling
• EU regulatory compliance

FAQ (selected)

• Do they degrade in any soil? — The breakdown rate depends on moisture, temperature, and site microbiology. In cold/dry soils, timelines extend. Refer to the per-lot datasheet for guidance.
• Do they hold up in strong winds? — For winds > 12 m/s, increase anchor density and stake length (150–180 mm) and reinforce critical overlaps and edges.
• Are they compliant for public works? — Designed to facilitate environmental compliance. Lot documentation, MSDS, and declarations are provided.
• Can I combine them with metal staples? — Yes—use a tactical mix in high-load zones if needed; preferred approach is 100% biodegradable to avoid manual removal.

Caractéristiques / spécifications techniques

• Material: Compostable biopolymer (PLA/Starch)
• Lengths: 100 mm (150 mm, 180 mm on request)
• Color: Natural / Green
• Degradation time: 12–24 months (indicative, depends on soil and moisture conditions)
• Service temperature: -10 to 50 °C
• Packaging: Recyclable cartons with lot/date labeling