•GCS – Greentec Control System
•Stable hydraulic raisable infeedtable, suitable for threepoint model
•Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream
•Crane mounting plate on the drawbar with double hydraulic telescopic legs on both sides
•LED-lighting around according to guidelines
Options
•Heavy duty 2-rows forged steel infeedchain hydraulic raisable
•Hydraulic tilting Venturi
•Electric start aid 12 volt including cable set
•Different crane and crane control options
•Suspension air-suspended instead of hydraulic
•Different lighting and support leg wheel set options
Versions
•Available with 2 or 4 input rolls
•Standard version or Big Foot
Features
Own hydraulic cooling system (using Venturi airflow)
New design rotor housing with wear plate under the shredder drum.
Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream.
No nonsense machine; chipping at the front, discharge at the back.
No jacks or accelarator needed, which otherwise shatters good woodchips.
This prevents unneccassary wear, saves power and therefore fuel, resulting in higher efficiency.
Easy switch to low engine speed to reduce fuel consumption and noise. This gives coarse wood chips with even lower fine percentage.
Drum
Knives distributed along the drum, with blower blades on both sides of the drum.
Buttom knive placed below cutting knive, easy accessible.
With blower blades on both sides of the drum.
Specially designed counterknive, small branches are cut at a differente angle, resulting in better chipping quality.