Multi-use fork

not specifiedrear-mountfor loaders

Underhaug Multifork – for all transport tasks. Choose between 10, 15, 20, or 30 cm tine spacing. Curved or straight tines. Available in widths of 1.5, 2.0, 2.5, and 3.0 meters. The Underhaug Multifork is a truly robust tool for front or rear mounting, suitable for all transport tasks. The sturdy construction is designed for easy and quick adaptation to all types of front loaders and quick coupling frames. It can also be supplied with a standard 3-point hitch. Unique tool Underhaug Multisvans is a unique multi-tool for handling stones and many other loading and transport tasks such as silage, dry manure, firewood, straw and hay bales, pallets, etc. It can be used for most purposes. Robust frame construction To achieve the necessary strength, the frame is made of solid tubes. After welding, the entire construction is hardened according to Kverneland's special hardening methods. The same applies to the tines after rolling. Different tines Underhaug Multisvans is supplied with curved (960) or straight (980) tines with a spacing of 10 or 20 cm. Two versions are available: one with a working width of 150 cm and one with a working width of 200 cm. The curved tines are especially suitable for various loading tasks and are very good for gathering/collecting stones. You do not have to lower your back all the way to the ground, which provides much better soil separation. Since the main tube rises from the ground, there is less wear on the tube. Very efficient front loader. Equipped with a double-acting hydraulic top link, the Underhaug Multisvans is a very effective tool for breaking up stones and roots. Mounted on the front loader, it is a handy and efficient tool for handling silage, bedding, and dry manure. The four side tines provide good support on the sides and allow for larger loads. By removing some tines, Multisvans can also be an effective pallet fork. Wide range of brackets As standard, Multisvans is supplied without connection brackets. The program includes brackets for: Trima, Ålø, Bergsjø, Ålø type III, Large Volvo, Small Volvo, and Stoll. In addition, a 3-point bracket with tip. - Brand: Underhaug - Model: Multifork - Tine spacing options: 10, 15, 20, or 30 cm - Tine types: Curved or straight - Available widths: 1.5, 2.0, 2.5, and 3.0 meters - Mounting: Front or rear, adaptable to all types of front loaders and quick coupling frames, optional standard 3-point hitch - Frame: Solid tube construction, hardened after welding - Tine versions: Curved (960) or straight (980), spacing 10 or 20 cm - Working widths: 150 cm or 200 cm (for Multisvans) - Brackets: Trima, Ålø, Bergsjø, Ålø type III, Large Volvo, Small Volvo, Stoll, 3-point with tip