Hazelnut thresher FPM-1800 AUFL

Chassis Assembly of the Machine 120 N.P.U. It is manufactured from iron. The machine has a system that can extract the hazelnut to be extracted from a distance of 12 meters. 6 "(150 mm) diameter 12 meter hose system is required for hazelnut absorbing system. The machine is manufactured with a system that can transport the extracted hazelnuts to a distance of 12 meters. 4 "(100 mm) diameter 12 meter long hose system required for hazelnut pressing system is located on the machine. All belt-pulley and moving parts are protected in accordance with the machine safety regulations. In order to be able to scale the machine under rough terrain, the machine uses 4 hydraulic feet of 90 cm. In order to be able to balance the machine in balance, a binary balance system is used. The mill pressure is spring-loaded and can be easily adjusted via the mill. The flywheel pulley system on the main axle provides fuel savings by reducing the power requirement of the tractor after reaching the full speed of the machine. The machine is in front of the control panel, the machine's speed, hydraulic pressure values, fan temperature, oil temperature values ​​and control of the lighting system of the machine can be provided. On the machine there is a rotating lamp and a warning signal system that is compatible with the traffic behind it. It is important for the product to be inspected during night work on the machine. Thanks to the hose winding system, the 6 "(150 mm) hose used in the suction system can be comfortably wrapped around the machine.