{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... • Suitable up to 8 m beneath substrate level. Deeper immersion depths on request • Horizontally adjustable +/- 25° • Vertically adjustable up to 30° through hydraulic cylinder or pinion • Authorized for ex-zone 1 within the tank • A 13.5 kW version ...
SUMA Rührtechnik
... minimize abrasion • Giantmix FT HY only with PTO drive and without motor possible Adjustment options: The agitator is the only agitator worldwide that can be adjusted ± 30° horizontally and vertically. A high-quality ...
SUMA Rührtechnik
... • Motor performance: 18.5 / 22.0 kW • Tube Ø 220 mm, ss316 • Tube lengths 4.0 / 5.0 / 6.0 m • Propeller Ø 1600 mm • Installation up to 6 m below substrate level • POM protection to minimize abrasion Scope of application: The GIANTMIX AMX has ...
SUMA Rührtechnik
... • Motor power of 18.5 / 22.0 kW • Tube Ø 220 x 8 mm in ss316 • Tube length 4.0 / 5.0 / 6.0 m • Vertical inclination through hydraulic cylinder • Dry matter content up to 16 % • POM protection to minimize abrasion Scope of application: The ...
SUMA Rührtechnik
... Scope of application: The ceiling-mounted GIANTMIX BG2 is designed for installation on top of the tank. The long axis agitator can be used to mix substrates with a dry matter content of up to 12% and pH values between 6.5 and 8.2. Technical ...
SUMA Rührtechnik
... SUMA paddle agitators for efficient agitation of floating and settling phases, even under demanding conditions: individually configurable, low-maintenance and ideal for highly viscous media with up to 15% dry matter content. Count on ...
SUMA Rührtechnik
... is perfectly tailored to your requirements. More than just an agitator: For solutions perfectly tailored to your requirements, we draw on our extensive product portfolio of agitators. This includes the central mixer ...
SUMA Rührtechnik
... HT blade for the agitator blade. With a speed of 128 rpm or 65 rpm, the FX is one of the slowest agitators in SUMA's wide product range. POM protection and a scraper plate on the agitator blade bushing ...
SUMA Rührtechnik
... design of the agitator was on maximum durability. The long axis agitator is available in a length of 4.0 metres. For the propeller, SUMA relies on the three-bladed HT 1200. With a speed of 128 rpm, the FX is one of the ...
SUMA Rührtechnik
... hours. Galvanic isolation: By means of fibreglass-reinforced PA discs between the agitator and the ss304 mounting. Agitator propeller: 2-bladed agitator propeller. Galvanised steel blades ...
SUMA Rührtechnik