{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
With way over a million units operating worldwide, WAM VFS-type Butterfly Valves for powdery and granular materials represent one of the Group's most industrial products. Description VFS Butterfly Valves consist of two high-pressure ...
SAVECO
The increased use of WAM’s special SINT engineering polymer in designing the VL range makes these Slides Valves the ideal equipment for intercepting the flow of powdery or granular materials in gravity or conveying applications. VL-type ...
SAVECO
As its predecessor, the VHS-type, the VHS-C Pressure Relief Valve is the last safety net when abnormal pressure conditions endanger the silo structure. This is why sudden excess or suction pressure inside the silo has to be dealt with ...
SAVECO
HD2/MD1/MD2 heating regulation models are standalone gas control units that operate with a 220V solenoid valve -Gas control units featuring 2 manually adjustable pressure reducing valves -The 1st pressure reducing valve operates ...
The PROGAZ is a unit that connects to a computer via a 0/10 volt control signal line. The temperature is controlled by a sensor connected to the computer also controlling the building’s ventilation system. -Motorised pressure reducing ...
The PROGAZ is a unit that connects to a computer via a 0/10 volt control signal line. The temperature is controlled by a sensor connected to the computer also controlling the building’s ventilation system. -Motorised pressure reducing ...
BERMAD C10 is a high quality combination air valve for a variety of irrigation networks and operating conditions. It evacuates air during pipeline filling, allows efficient release of air pockets from pressurized pipes, and enables large ...
Bermad C.S
DN: 15, 50, 20, 25 mm
The DG-10 combination air valve has the features of both an air release valve and an air & vacuum valve. The air release component of the combination air valve was designed to automatically release small pockets of air to the atmosphere ...
Arivalves
Designed to e ciently extract the air trapped in medium size pipes, big filters, tanks and in any other places where the absence of air is required for a correct performance. The valves are located at the outlet of pipes whose slope ...
UNIRAIN S.A.
AIR RELEASE VALVE OF DOUBLE AND TRIPLE EFFECT. CONCENTRATED EFFICIENCY. The powerful VP air release valves keep your installation in perfect state while it treats the dangerous air inside. It has the same features as the GTR air release ...
Gestiriego
When designing its valve boxes, Wynveen devoted special attention to preventing internal leaks. By using the most advanced techniques, the clearance between the moving parts has been kept to an absolute minimum. Moreover, the end of the ...
DN: 10 mm - 50 mm
AIR RELEASE VALVE The air release valve of HYDROCONTA with triple effect system, eliminates the kinetic and residual air of the pipes. Metalic air release valves ranges from DN 15 to DN 50. – Expelling the air at high flow velocity ...
Sluice valve BSHM is intended to discharge precipitated product from dischargers and devices for air cleaning. Аdvantages 1. Durability and compact design; 2. Smoothness in the supply of material; 3. Versatility; 4. With a simple ...
OLIS
Sluice valve is intended to remove settled stuff from dischargers and clean air machines. It can be applied to outlet bulk materials from hoppers, as also to measure them out. Sluice valve works along with cyclones, filters, pneumatic ...
OLIS
Round diverter valve with an electric drive KPS, manufactured by OLIS Ltd, is designed to change the direction of product movement through gravity pipes. Аdvantages 1.High manufacturing quality; 2.Thick-walled steel structure; 3.Lining ...
OLIS
Ensures the guidance of the product without any problem to where it is supposed to go. They are designed depending on the product type and capacity. Electrical, Manual or Pneumatic controlled models are available. ALTINBILEK ...
Used to empty bunkers and silos. Opening and closing operations can be done with electric motor, pneumatic piston or manually controlled.
DN: 180 mm - 1,040 mm
-The body is made of aluminum and there is a cylindrcal rotor inside. -Used at pneumatic conveying lines. -Composed of a pneumatic piston. solenoid valve and a switch that indicates the direction of the material.
The rotary drum diverter valve (VDR model) is a flow switch for pressure and suction conveyor systems. The Diverter valve is produced in various capacity sizes to better satisfy the client needs.
Please specify:
Help us improve:
remaining