Irrigation valves

DN: 2 in - 3 in

1000 Series Valves save energy with higher flow capacity and lower friction loss – better than any other valve on the market. (2" & new 3" valves available.) The 1000 Series is geared ...

DN: 2 in - 8 in

... operated sleeve-type valve, the 800 Series Control Valve is designed for versatility. The basic body can be equipped with several different options for controlling pressure and flow in piping systems ...

DN: 2 in

The Nelson Quick Coupler makes portable Big Gun® irrigation faster and easier than ever before. A quick twist attaches the gun and key to the valve. Simply connect the hydraulic assist and the gun goes ...

DN: 4 in

VYR-6154 is a 4 "hydraulic valve, made of plastic and reinforced with nylon and INOX steel spring and diaphragm reinforced also with high strength nylon mesh. Its modular design allows us to configure the type of connection ...

Metal hydraulic valves for full flow through elbows and straight sections

... quality polypropylene raw material and it has resistance to impact. + It is possible to provide bidirectional flow in the valve. + They do not cause any pressure or flow loss during fluid transition. + They supply ...

... quality polypropylene raw material and it has resistance to impact. + It is possible to provide bidirectional flow in the valve. + They do not cause any pressure or flow loss during fluid transition. + They supply ...

... quality polypropylene raw material and it has resistance to impact. + It is possible to provide bidirectional flow in the valve. + They do not cause any pressure or flow loss during fluid transition. + They supply ...

A beautiful garden requires a great deal of attention – Your new hose plug system doesn’t: The extremely robust GEKA® components made from sturdy brass easily withstand not only all weather conditions, but even the weight of your car ...

A beautiful garden requires a great deal of attention – Your new hose plug system doesn’t: The extremely robust GEKA® components made from sturdy brass easily withstand not only all weather conditions, but even the weight of your car ...

DN: 20 mm - 400 mm

These powerful, reliable metal valves give you remarkable hydraulic performance and impeccable control over your irrigation system. They’re ideal for systems with high water pressure (up to 25 bars). ...

... Control Valves are the economical choice for residential, commercial, and small agricultural irrigation systems. The V1000 Control Valve can be used to control blocks with flows up to ...

Plastic electric valves (reinforced Nylon). Sizes from ¾” to 2″. Flow regulator in all models. 9V for battery controllers. Ergonomic and compact design. Total opening and closing with non-dripping security. Spring ...

The dial shut-off knob makes changing or cleaning sprinklers and spray nozzles easy while the system is still operating. Streamlined design reduces snagging and unintentional operation Smooth-bore design maximizes bi-directional flow ...

... 2.5 cm) In-Line Jar-Top Valve operates in the widest flow and pressure ranges from 0.25 to 30 GPM (.9 to 113.6 LPM) and 10 to 150 PSI (.7 to 10.3 BAR). These valves are typically installed below ground ...

DN: 10 mm - 100 mm

Grey PVC ball valve for irrigation and water supply systems, single union, free support. EPDM seals, PE ball seats. Operating pressure PN 16 at 20° C up to DN 50, PN 10 at 20° C DN 65-80, PN 6 at 20° ...

Manualy Controled Valves are hydraulic control valves which are operated by line pressure and provide 3-way mini valves for on-off operation. The valve has a minimum ...

Main line equipment suitable for a wide range of industrial, agricultural and, domestic, applications.

DN: 20 mm - 300 mm

... range of hydraulic valves to adapt to and comply with all pressure, flow etc requirements. Hidrovalve valve with solenoid Hidrovalve pressure reducing valve Hidrovalve flow restricting ...

DN: 40 mm - 200 mm

... composite material, diaphragm - operated hydraulic control valves with a working pressure up to 10 bar. The valves are suitable for installation on water transmission, landscape and irrigation ...

DN: 16 mm - 20 mm

... Connection, Lay-Flat Connection and Ø22 Tape Connection A total of 27 different combinations are available. Quick Action valve with positive quarter turn “On-Off” feature

DN: 20, 25, 40, 50 mm

ELECTRICALLY ACTUATED GRP VALVES for automatic control of dripline, microsprinkler and sprinkler systems in open fields, orchards, greenhouses and landscape applications MAIN FEATURES 3/4”–2” electric valve High ...

DN: 0.75 in - 3 in

... corrosion suffered by cast iron valves. These electric valves are molded in the highest quality with high impact resistance and a special variation made to tolerate chemicals products (made order), particularly ...

DN: 6 in

Armaş “M” model valve is the hydraulic control valve operated by line pressure and designed to ensure opening/closing process by means of 3-way selector valve. Minimum opening pressure ...

DN: 80 mm - 400 mm

The BERMAD Model IR-457-66-U Level and Flow Control Valve with Bi-Level Vertical Float is a hydraulically operated, diaphragm actuated control valve that controls reservoir filling, opening at preset ...

Air release valve Air release valves can be supplied. These should be fitted at high points in the water main to prevent water hammer in the pipeline.

DN: 0.75, 0.5 in

DN: 0.25 in - 2 in

Polypropylene homopolymer ball valve Diameters from DN008 - ¼" to DN050 - 2" Threaded F/F (ISO 228/1) Blow-out proof stem (ball and stem in stainless steel on request) With handle or butterfly (up to DN≤32) TR CU ...

APPLICATIONS - Eurodrip USA iron valves are recommended for use in many agricultural irrigation applications. - Reliable with trouble-free operation; controlled, smooth and accurate closing and opening ...

DN: 0.5 in - 4 in

VALVES: The range of SAB valves is made up of different types that fully meet the different plant requirements for water, gas and fluids in general.