Belt rakes

Working width: 1.58, 1.78, 2.19 m

HAYRAKES AlpFlow 158, 178, 218 FEATURES Rotor pick-up Vertically installed conveyor belt Fodder not trampled by feeler wheels Machine less burdened by the fodder weight Easy to maneuver (short in length) Light ...

Working width: 1.6, 1.9, 2, 2.2 m

Belt rakes are designed for raking, spreading and turning mowed mass which shortens drying time. This type of rake is very easy to use and is suitable for low powered tractors. Advantages: - ...

-With integrated pendulum hinge – ideal for vehicles with lifting gear relief -Continuously height-adjustable contact wheels -Powered directly by tractor hydraulic or optionally by front power take-off (PTO) shaft with its own oil supply -Large ...

Working width: 6.2 m - 10.95 m

These belt mergers are ideal for contractors and machinery cooperatives but also for individual farms. The 2 independent pick-ups offer side or central delivery with several combination possibilities. Rake ...

Working width: 4 m

The MERGENTO F 4010 ALPIN is the lightweight amongst the front mergers. With a weight of just 575 kg and a pick-up width of 3,08 m, you can work safely on steep terrain - even with light tractors and small twin axle mowers. Steep ...

Working width: 8.64, 10.16 m

... ’s newest cam technology with positive belt drive motors and the ideal belt width and angle to push crop to the back of the belt. The result: tight crop flow and maximum ...

Working width: 3.55 m - 4.45 m

... speed of the conveyor belt are set by a hydraulic motor.. PERFECT FORAGE FLOW The finger rotor and pick-up unit ensure perfect forage flow. LEFT OR RIGHT SIDE SWATH The forage is placed on the left or right side ...

Working width: 190, 230, 210 cm

... any type of soil permitting an excellent cleaning during the raking and moving phases. The windrow formed by the SITREX belt rake is never a long braid but rather a soft and light windrow. Exceptional ...

Working width: 2 m

... responsible policy is the Holaras belt rake, ECO 2000-S. The Holaras beltrake is also ideal for use behind small-gauge tractors, and has a standard working width of two metres. Other ...

Working width: 8'06"

The 186M Windrow Merger from RCI Engineering is a simple, cost-effective solution to merging windrows together while minimizing dirt and foreign material in the windrow as can be experienced in raking operations.

... system. The main difference compared to traditional rakes is represented by the pick-up system: the ROC RT 1220 lifts the crop in order then to transport it on a conveyor belt, whereas traditional rakes ...

Working width: 250 cm

... , which has made Fransgård the market leader in this machine. The swath wilter is available in 2 models with either a v-belt or chain drive. Both models can be used to great advantage in grass, hay or straw and leave ...

Working width: 190 cm

The BELT RAKES allow to carry out the operations for a good haymaking: Turning grass Delivering at the side, making rows Spreading The rakes can fit to any tractor with power take-off ...

Working width: 125 cm - 180 cm

The belt hayrake is used to turn cuttings during the drying phase and then form a swath with the swathe panelling folded down. This makes it easier for the cuttings to be picked up for transporting. Success factors -Turn ...

Working width: 1.05 m

Belt rake with one belt (with spread swath position too) suitable for power-mowers and engine driven cultivators, with a working width of 1.05 m. It is directly fitted to the power take-off ...

Working width: 3 m

You drive a powerful tractor and expect your front machine to be powerful and reliable? Then the Profi series is the perfect choice for you. The Profi series offers unique driving dynamics and working quality, completely independent of ...

Working width: 6.1 m

... stalling. The drive motors on each end of the conveyor can be switched to pull conveyor in either direction, never pushing the belt. SINGLE BUTTON CONVEYOR CONTROL The 2114 uses simple and easy to use control for ...