Mowers

Working width: 4, 4.9 m

***ALL PRODUCTS MAY NOT BE AVAILABLE IN ALL MARKETS. CONTACT US FOR DETAILS*** Quick in the field, quick on the road. Don’t be limited by transport width. In just 30 seconds, our Road Friendly TransportTM option transforms both ...

Working width: 2.62, 3.04 m

... the mowers glide over the ground, the cleaner your basic ration remains. Our mower combinations represent the best in ground tracking. After all, the "floating cut" was developed by PÖTTINGER back in ...

Working width: 7.24, 8.08, 8.92 m

... the mowers glide over the ground, the cleaner your basic ration remains. Our mower combinations represent the best in ground tracking. After all, the "floating cut" was developed by PÖTTINGER back in ...

Working width: 2.02, 2.62, 3.04 m

... PÖTTINGER developed the NOVAALPIN front disc mower to meet the challenges of these operating conditions. Smooth running, strong and lightweight machines are the result. NOVAAPLIN always fits! These versatile mowers ...

Working width: 3.06, 2.86, 3.26 m

Forage harvesting non-stop. With the Fendt Cutter drum mower. The perfect cut is the foundation of quality forage. With the Fendt Cutter drum mowers, the perfect cut is as easy as 1-2-3, regardless ...

Working width: 8.3, 9.3 m

... disc mowers. Perfect forage can only be harvested by perfect machines. The Fendt Slicer disc mowers meet any challenge, and leave no stalk standing, so that you have full confidence in making the perfect ...

Working width: 2.55 m

The new Sarracenia front mower, with a 2.60 m cutterbar, is fitted with an innovative ground tracking system that reduces the impact of the cutter bar with the unevenness of the ground and guarantees both optimal cutting ...

Working width: 3.24 m

The new Sarracenia front mower, with a 3.20 m cutterbar, is fitted with an innovative ground tracking system that reduces the impact of the cutter bar with the unevenness of the ground and guarantees both optimal cutting ...

Working width: 1.65 m

The Crassula disc mower can be ordered in four models from the smallest 4-disc with a cutting width of 1.65 m. to the largest 7-disc with a 2.85 m cutting width. The advantage of this type of mower ...

Working width: 2,200 mm

... PDK220 rear mounted disc mower is a compact, robust, characterized by lightweight structure where PRONAR cutter bar is applied. PRONAR disc mower can be easily mounted on various tractors. Minimum tractor ...

Working width: 2,600 mm

... mounted disc mower is equipped with a swath conditioner. This mower performs simultaneous grass mowing and swath conditioning. Consequently, grass is dried faster because conditioner teeth distribute ...

Working width: 3,000 mm

PRONAR PDT300 rear mounted disc mower. Central suspension which was used in the mower ensures an excellent operation on uneven and steep surface, clean and aesthetic cut and also optimum cutting height. ...

Working width: 3 m

... Most of maintenance works to be done on user’s own Proven design More than 20 years of experience in manufacturing of disc mowers Own design of Perfect CUT cutterbar tested on markets across the world 2 year warranty Standard ...

Working width: 3 m

... Most of maintenance works to be done on user’s own Proven design More than 20 years of experience in manufacturing disc mowers Own design of LiteCUT cutterbar tested on markets across the world 2-year warranty Standard ...

Working width: 1.8 m

Design High durability owing to use of high grade steel Gearbox with integrated clutch Change of rpm from 540 to 1000 possible by interchanging the V-belts Floating function Modular design enables hitch choice 3 types of hitch to ...

Working width: 15 m - 15 m

Working width: 2.9 m - 3.7 m

Working width: 8 m - 10 m

... cutting-quality Daily work on the grass fields requires reliable machinery. Durable disc mowers provide perfect stability, quick adaptability, and easy maintenance. The range of SIP mowers extends up ...

Working width: 65 cm

Mechanical disc-mower, ideal for all ecological and mechanical controls of the weeds in vineyard and orchard. It is driven by the tractor’s hydraulics. Standard equipment: independent Frame with 3-point linkage Cat ...

Working width: 145, 148 cm

E-TRAIL is a radio-remote-controlled vehicle designed to mulch grass and brushwood in all kinds of environments. Its special design allows to use the machine for longer periods even when working in sloped areas - up to 55°- and in all ...

Working width: 65 cm

Mechanical disc-mower, ideal for all ecological and mechanical controls of the weeds in vineyard and orchard. Equipped with independent frame and hydraulic system. Standard equipment: independent Frame with 3-point ...

Working width: 2,000, 2,200, 1,600, 1,800 mm

Shredder equipped with double pick-up, which is useful for chipping large volumes of wooden material, in the same way it happens with pruning. Lampo uses TIERRE's patented rotor, which allows you to work uninterrupted, with great advantages ...

Working width: 6,400 mm

The folding flail mower AQUILA 640 is a heavy stalk chopper that can be used in corn, sunflower, straw and rice crops. Suitable for processing large lands and for large companies, it is perfectly matched with tractors ...

Working width: 1,730 mm - 2,930 mm

Developed for professionals in agricultural work and heavy duty work, the PANTERA mulcher is a versatile machine that can face any kind of work. Its use ranges from cutting grass mulching runners and stalks. Thanks to Tierre patents ...

Working width: 50 cm

... driver at all times. Key to the ability of the mower to swing in either direction is a redesign of the mounting linkage to allow lateral movement between the tractor and mower. The hydraulically cushioned ...

Keltec has designed the KM-300L mower series with productivity and grass quality in mind for agricultural and contractor users. The KM-300L mower series is available in three build configurations – plain ...

Working width: 87 cm

Specifications Engine model - : 159 cc Lon Engine type - : 4 stroke CC - : 159 cc Airfilter - : Paper with foam filter Starter - : Recoil Oil - : SAE 30 Gasoline/diesel - : Gasoline Engine oil - : 0,6 litre Cutting width - : 87 cm Pull ...

Working width: 2,650 mm

Technicial Specifications - Working Width - 2650 mm Length - 4900 mm Width - 3000 mm Height - 1700 mm Working Capacity - 15,2 ton / hr Number of Knives - 12 Number of Discs - 6 P.T.O. - 540 dev/min Disk turnover - 300 dev/min Tail ...

Technicial Specifications - Mower interval - 1.950 mm Number of Knives - 8 Work cycle - 540 dev/dk Drum number - 2 Tail shaft speed - 8 - 10 km/hr Length - 3.200 mm Width - 1480 mm Height - 1.100 mm Work ...

Teknik Özellikler - Length: 4000mm Width: 920mm Height: 1100mm Working Width: 2700mm Tractor Power: 70-80HP P.T.O: 540 rpm Working Speed: 8-10 km/hr Num. of Drums: 4 pcs Cutting Blades: 12 pcs W.Capacity: 2,2 ha/hr Weight: 585 kg

Working width: 1.2, 1.6 m

AF ATV FLAIL MOWER 1.2M & 1.6M BUILT LIKE A TANK FOR DEMANDING APPLICATIONS! The Wessex AF ATV FLAIL MOWER, in 1.2 and 1.6m working widths, have been developed to meet the needs of contractors, ...

Working width: 1.25, 1.45, 1.75, 2.25 m

For control of dense vegetation, long grass and woodland rides, the WESSEX WFM FLAIL MOWERS are a real tough performer and are perfectly suited to the job. Hammer flails pulverise tough material while a full width adjustable ...

Working width: 1.2 m

Boasting the same market leading quality and benefits as the flagship AF-120 model, the AFE-120 flail mower with 13hp Briggs & Stratton engine has been designed for cutting long grass and vegetation in private grounds; ...

Working width: 135 cm - 270 cm

The Enorossi Sickle Bar Mowers come from an accurate study for a wide variety of uses especially in pastures. BF/BFT series with riveted guards and BFS series with bolted guards. All mowers are standard ...

Working width: 165, 185 cm

Rear-mounted drum mower available in two working widths (1.65 mt. and 1.85 mt.). High speed discs allow high quality cutting performances also in stony grounds. Mechanical or hydraulic lifting systems with cabin control, ...

Working width: 300 cm

The compact design allows the mower to adapt to any types of grounds. Standard windrower discs. Simple and practical spring compensation system Two strong compensation springs guarantee a uniform pressure on the ground ...

Working width: min 90.0 cm

The remote-controlled flail mower Peruzzo mod. ROBOFOX ELECTRA, a top-notable novelty in the world of professional shredding, is equipped with FULL ELECTRIC propulsion, for both: the advancement and for the drive of the ...

Working width: 105 cm

The self-propelled remote-controlled flail mower Peruzzo mod. ROBOFOX HYBRID, a top-notable novelty in the world of professional shredding, it is equipped with a 28CV engine branded Briggs&Stratton with special oil tank ...

Working width: 960, 1,120 mm

The Light flail mower mod. FROG is suitable for small tractors. The flail mower Frog is Rear mounted for 540 rpm on PTO, cut grass in small pieces (mulching) and is possible to cut small branches fitting ...

Working width: 3,000, 4,050, 4,460 mm

TECHNICAL SPECIFICATIONS NMC - 1 - 2 - 3 Number of Discs - 7 - 6 - 5 Attach Type - Trailing - Mounting - Mounting Length (mm) - 4900 - 1530 - 1530 Width (mm) - 3000 - 4460 - 4050 Height (mm) - ...

Working width: 920, 1,950, 990, 1,100 mm

TECHNICAL SPECIFICATIONS NMM - 1 - 2 - 3 - 4 Number of Drums - 2 - 2 - 2 - 4 Length (mm) - 2750 - 3200 - 1000 - 4000 Width (mm) - 990 - 1100 - 1950 - 920 Height (mm) - 1100 - 1100 - 1090 - 1100 Working Width(mm) ...

Working width: 1,750 mm

TECHNICAL SPECIFICATIONS NMR - 1 Length (mm) - 925 Width (mm) - 3200 Height (mm) - 890 Working Width(mm) - 1750 Work Capacity (ha/h) - 1.5-2 Required Tractor Power (hp) - 40 Pto Speed (rpm) - 540 Working ...

Working width: 160 cm - 260 cm

... widths of up to 260 cm are used for the rugged frame construction of broad gauge mowers, which enables extremely high acreage performance. This makes broad gauge mowers particularly popular in the agricultural ...

Working width: 68 cm - 138 cm

Rapid Eco-Mulchers are absolutely perfect for mulching applications involving undergrowth and green areas. The solid steel blades, which rotate horizontally, offer very high cutting performance. The finely mulched cut material is generally ...

Working width: 68 cm - 130 cm

Rapid Flail Mowers cut through grass and seedlings, leaving behind finely chopped mulch. The Y blades, which are mounted on the balanced driving shaft so that they are free to move, are extremely hard-wearing and enable ...

Working width: 230 mm

Standard equipment: 2-belt transmission with tensioner - Rear discharge - Central greese extension - Anti-scalp roller - Standard drive line - Built according CE rules Choice of equipments completing the machine: - Standard 3- ...

Working width: 154, 105, 130 cm

Thanks to its extensible arms, this flail mower can work in extreme offset position and in various different angles. It is ideal for the use in green areas (like parks, gardens etc.). Strong and versatile, it is not ...

Working width: 135, 162, 192 cm

Standard equioment: Standard driveline - Front safety protections -Rear roller - Hydraulic inclination adjustment - Hydraulic side adjustment - Gearbox at PTO 540 RPM and free wheel inside - Oscilling bearings with double row-bal mounted ...