Mounted mowers

Working width: 220 cm - 340 cm

MECHANICAL SUSPENSION SYSTEM MOUNTED SIDE DISC MOWER/CONDITIONER

Working width: 2.55 m

The new Sarracenia front mower, with a 2.60 m cutterbar, is fitted with an innovative ground tracking system that reduces the impact of the cutter bar with the unevenness of the ground and guarantees both optimal cutting ...

Working width: 1.65 m

The Crassula disc mower can be ordered in four models from the smallest 4-disc with a cutting width of 1.65 m. to the largest 7-disc with a 2.85 m cutting width. The advantage of this type of mower ...

Working width: 2.45 m

The Crassula CR6 disc mower has a cutting width of 2,45 m. The advantage of this type of mower lies in its ease of use, its relative light weight combined with the excellent contour following thanks ...

Working width: 2,200 mm

... PDK220 rear mounted disc mower is a compact, robust, characterized by lightweight structure where PRONAR cutter bar is applied. PRONAR disc mower can be easily mounted ...

Working width: 2,600 mm

PRONAR PDT260C rear mounted disc mower. Central suspension which was used in the mower ensures an excellent operation on uneven and steep surface, clean and aesthetic cut and also optimum ...

Working width: 3,000 mm

PRONAR PDT300 rear mounted disc mower. Central suspension which was used in the mower ensures an excellent operation on uneven and steep surface, clean and aesthetic cut and also optimum ...

Working width: 1.35, 1.65, 1.85, 2.1 m

... own Proven design Over 30 years of experience in drum mower manufacturing 2-year warranty Conforms to European norms of most agricurtural institutes Farmers’ trust More than 50 000 drum mowers working ...

Working width: 2.1, 2.65, 3 m

Front drum mowers Front drum mowers SaMASZ are characterized by perfect ground following. Clean fodder and turf protection Low ground pressure together with large surface of contact facilitate mowing ...

Working width: 1.6, 2, 2.4, 2.8 m

... operating costs Most maintenance works possible to carry out on user’s own Proven design Over 20 years of experience disc mower manufacturing LiteCUT cutterbar of own design, tested on the markets across the world 2-year ...

Working width: 9 m

The Keltec KM-600B butterfly mower-conditioner is the ideal solution for high capacity grass mowing and harvesting, when used in conjunction with a front mounted mower. The KM-600B butterfly ...

Working width: 3 m

... driver at all times. Key to the ability of the mower to swing in either direction is a redesign of the mounting linkage to allow lateral movement between the tractor and mower. The hydraulically cushioned ...

Working width: 3 m

Keltec has designed the KM-300L mower series with productivity and grass quality in mind for agricultural and contractor users. The KM-300L mower series is available in three build configurations – plain ...

Working width: 1,200, 1,400, 1,500 mm

... front flail mower can be fitted to any tractor 540/1000/2000 rpm on PTO , with clockwise or anticlockwise rotation. The front flail mower Scorpion Peruzzo is Engineered to be mounted ...

Working width: 1,200, 1,400, 1,500, 1,800 mm

... linkage. The PUMA Flail Mower is Suitable for any mowing or mulching application. Whether it’s simple manicuring of grass, mulching of tall, thick & heavy stands of vegetation, or mulching of pruning’s, expect Peruzzo ...

Working width: 1,500, 1,800, 2,000 mm

... linkage with side offset possibility. Front & Rear Flail Mower for 40 to 60 Tractor HP. The Elk Front & Rear Mount Series Flail Mower is Suitable for 40 - 60 HP Tractors. This Flail Mower ...

Working width: 1,363, 1,497, 1,739 mm

STANDARD EQUIPMENT:​ - Floating self levelling universal hitch - Mechanical side shift - Toothed belts - Valves block complete with priority valve foradjusting oil flow, anti-shock valve (pressure relief valve), anti-cavitation - ...

Working width: 1,730 mm - 2,930 mm

Developed for professionals in agricultural work and heavy duty work, the PANTERA mulcher is a versatile machine that can face any kind of work. Its use ranges from cutting grass mulching runners and stalks. Thanks to Tierre patents ...

Working width: 2,000, 2,200, 1,600, 1,800 mm

Shredder equipped with double pick-up, which is useful for chipping large volumes of wooden material, in the same way it happens with pruning. Lampo uses TIERRE's patented rotor, which allows you to work uninterrupted, with great advantages ...

Working width: 1.25, 1.45, 1.75, 2.25 m

For control of dense vegetation, long grass and woodland rides, the WESSEX WFM FLAIL MOWERS are a real tough performer and are perfectly suited to the job. Hammer flails pulverise tough material while a full width adjustable ...

Working width: 1.5 m

FRX-150 OUT FRONT FLAIL MOWER Take the many advantages of an out front flail mower and give it the ability to cut both long grass and sports turf and you’re surely on to a winner. The Wessex ProLIne ...

Working width: 1.5 m

FRX-150H OUT-FRONT FLAIL MOWER Quiet, smooth, fast and highly manoeuvrable, the Wessex ProLine FRX-150-H is the versatile specialist. It has been specifically developed in conjunction with Ransomes Jacobsen? exclusively ...

Working width: 11 m

•Clear View •Excellent overview as the complete machine is in the drivers focus. Obstacles are detected without any difficulty. Benefit of maximum working width – no unnecessary overlap. •No overrun of upright food •Tractors with ...

... of the overlap to the cutting width of the Front Mower guaranteed. •Adjustable Overload-Protection on both Cutting Units •Balanced weight distribution on the tractor in combination with our front mower •Also ...

... you are heading – no upright food will be overthrown. Power Take Off (PTO) actuation possible. •Upgrade to a Standard-Front-Mower any time possible •Solid frame made from fine grained steel •Cutting unit close to the ...

Working width: 2,650 mm

Technicial Specifications - - - 5 Disc - 6 Disc Length - 1530 mm - 1530 mm Width - 4050 mm - 4460 mm Height - 1170 mm - 1170 mm Working Width - 2250 mm - 2650 mm Working Capacity - 2,3 ton /hr - 2,8 ton /hr Tail ...

Working width: 2,250 mm

Technicial Specifications - - - 5 Disc - 6 Disc Length - 1530 mm - 1530 mm Width - 4050 mm - 4460 mm Height - 1170 mm - 1170 mm Working Width - 2250 mm - 2650 mm Working Capacity - 2,3 ton /hr - 2,3 ton /hr Tail ...

Working width: 2,650 mm

... /min Tail shaft speed - 8-10 km weight - 1200 kg Tractor power - 70 - 80 HP Tires - 10,0/75 - R15,3 Read more - Side Mounted Conditioner - Rubber roller

Working width: 50 cm

Working width: 135 cm - 270 cm

The Enorossi Sickle Bar Mowers come from an accurate study for a wide variety of uses especially in pastures. BF/BFT series with riveted guards and BFS series with bolted guards. All mowers are standard ...

Working width: 165, 185 cm

Rear-mounted drum mower available in two working widths (1.65 mt. and 1.85 mt.). High speed discs allow high quality cutting performances also in stony grounds. Mechanical or hydraulic lifting systems ...

Working width: 300 cm

The compact design allows the mower to adapt to any types of grounds. Standard windrower discs. Simple and practical spring compensation system Two strong compensation springs guarantee a uniform pressure on the ground ...

Working width: 6.5, 7.8 m

The Trident Series triple flail mower is a high output finishing flail that is equally at home in wet or dry conditions. Unlike other types of mower, the Trident dictates the timetable and not the mowing ...

Working width: 0.6, 0.8 m

... the lightest of posts without knocking them over. FEATURES -0.6 or 0.8m wide barrier mower -Two strong updraft blades -Anti-scalp disc guard -Mounted on a spring-loaded arm -Hydraulically driven ...

Working width: 2, 2.5, 2.8 m

The Rolliflail HD series is the original heavy duty flail mower and a pioneer in versatility that is preferred by many professional customers to this day. The double skinned construction is computer designed providing ...

Working width: 8.56 m

... McHale Pro Glide Mower Range to the world market. McHale will be exhibiting three new products from this range; the McHale Pro Glide F3100 Front Mower, the R3100 Rear Mower and the B9000 ...

Working width: 3 m

The Pro Glide range of mowers offers a number of unique features which deliver; - Superior floatation - Self adjusting cutter bar angle - Constant cutter bar ground pressure - Enhanced cutter bar protection - Optimum ...

Working width: 3 m

... delivers 3 dimensional ground contour tracking for its Pro Glide range of rear mowers. This allows the mower an arc of movement from left to right and also allows the mower to move forward ...

Working width: 2,100 mm

... reciprocating mower is used for reaping the grass which grows at the farm, forest or pastureland It works at the hill, sloping field or small field It controls by the tractor driver and it has the good working performance, ...