Working width: 3,000 mm
... protects the sward but also saves fuel. Three-dimensional sensing of the ground contours The RAMOS 310 FZ front-mounted mower offers the largest possible pivot travel – up to 20° inclination – ...
FELLA AGCO Feucht GmbH
Working width: 3,570 mm
Power required: 44 kW
Swath width: 1,030 mm - 1,830 mm
Disc mower PRONAR PDF301 is a front disc mower which is mounted on the tractor’s three-point linkage. The mower requires PTO at the front of the tractor and one hydraulic ...
Pronar Sp. z o.o.
Working width: 8.56 m
... McHale Pro Glide Mower Range to the world market. McHale will be exhibiting three new products from this range; the McHale Pro Glide F3100 Front Mower, the R3100 Rear Mower and the B9000 ...
McHale Engineering Ltd.
Working width: 150, 180, 210, 240 cm
Power required: 44, 50, 55, 65 kW
PTO speed: 1,000 rpm
Extremely powerful side flail mower for intensive use. Large offset possibility to work far next to the tractor track; for example in ditch sides or in combination with a front mower. The ZF2 is a ...
PERFECT - VAN WAMEL
Working width: 500, 560, 1,000, 650, 800 mm
Power required: 8 ch - 16 ch
Weight: 68, 63, 105, 76, 59 kg
... rotor brake according to EN 12733 STANDARD EQUIPMENT Adaptable to any kind of two wheel tractors Front position (mower type) Rear position (flail type) Adjustable supporting roller Angular gear box ...
CERRUTI s.r.l.
Working width: 800, 1,200, 1,000 mm
Power required: 14 ch - 30 ch
PTO speed: 1,000, 800 rpm
Adaptable to any kind of 2 wheel tractor (front type) Grass cutting height adjustment with rear support roller or (on request) front wheels Rotor with Y blades or (on request) with set of hammers. Flanging attachment is articulated ...
CERRUTI s.r.l.
Working width: 1,430, 1,610, 1,026, 1,222 mm
Weight: 150, 160, 170, 180 kg
Adaptable to hydraulic loaders and tool carriers, with hydraulic capacity between 25 e 120 l/min. Front application, with attachment plate/system to be evaluated according to the operating machine standards. Adjustable supporting roller. Driven ...
CERRUTI s.r.l.
Working width: 1.95, 2.45, 2.65 m
... Heavy Duty is a very powerful Flail Mower developed for extreme conditions where a perfect finish is required. A very powerful construction gives the machine a long lifetime and the special developed flails mounted ...
GreenTec A/S / Spearhead
Working width: 0.6, 0.8 m
... anti-scalp disc that prevents the blades to mow into the ground. The spring-suspension on the Ø 60 or 80 cm large barrier mower can be continuously adjusted, which allow the machine to mow around, even thin fence poles ...
GreenTec A/S / Spearhead
Working width: 0.9 m
90 cm Flailhead with a choice of boot or back to back grass flails. Double Spiral Cut Rotor leaves a perfect cut.
GreenTec A/S / Spearhead
Working width: 0.9, 1.15, 1.4, 1.65, 1.9 m
An ideal solution for medium horse-power tractors, the GLX range of flail mowers allows all mowing work to be carried out in large green areas, and may be front or rear mounted.
NOREMAT
Working width: 8.9, 9.8 m
Power required: 180 kW
... horsepower and cutting widths. Unique Front Mower and Conditioner The AUTOCUT pull-type front mower features a patented rail system, with an effective pivot point just above the ground, this allows ...
Working width: 80 cm
Working width 80cm High passage, 3 blades per rotor. Width with guard 123 cm. Weight:68 kg Attachment Width:80 cm Acronym:ZRF
Working width: 1,500 mm - 1,700 mm
... should use a Rotor Blade Mower from ParkLand. It ensure a beautiful result - regardless of whether the grass is short or long. If mowing is on the programme, then you are well equipped with a Disc mower ...
Working width: 1,300, 1,500, 1,700, 2,000 mm
Power required: 18, 20, 25, 30 ch
PTO speed: 1,950 rpm
... GreenLine Flail Mower to cut your grass. Whether the grass is long or short makes no difference. The Flail Mower from ParkLand handles the task. You can easily and quickly adjust the cutting height. Beautiful ...
Working width: 2,500 mm
Power required: 90 ch
he perfect machine for professional lawn care: Scarifying without scalping Grass cutting Grass sweeper with brush Leaf collection. Standard equipment: Interchangeable wingtips on fan wheels. Save a lot of operating costs. Interchangeable ...
Working width: 180, 215, 155 cm
Power required: 25 ch
PTO speed: 540 rpm
Haryo BY 957 Meadow Mower has been produced according to the results of countless trials, in the norms that the farmer can use comfortably in accordance with agriculture. First of all, the farmer wants his machine ...
Working width: 215, 155, 180 cm
Power required: 25 ch
PTO speed: 540 rpm
Supertar HKY 978 Meadow Mower has been produced according to the results of countless trials in accordance with the farmer’s norms that the farmer can use easily. First of all, the farmer wants his machine to be of ...
Power required: 35, 40, 50 ch
PTO speed: 540 rpm
Weight: 320, 370, 420 kg
The Haryo RCP disc green fodder mower is produced with 4-5-6 discs and roller option. Due to the small diameter of the disc, there is no damage caused by the drum mowers to the plant root and blooming ...
Working width: 1.35, 1.65, 1.85 m
STANDARD EQUIPMENT: • 3-point linkage cat. I and cat. II for 1,35 m and 1,65 m mowers and cat. II for 1,85 m • Mechanical folding to the transport position • Mower works with PTO shaft 540 r.p.m.(standard ...
ZAGRODA INTERNATIONAL Sp. z o.o.
Working width: 900 mm - 1,900 mm
Power required: 20 ch - 40 ch
PTO speed: 540 rpm
... cutting of the grassland. These mowers have fixed tractor hitches, and their drive is provided by 2 trapezoidal belts with automatic spring-adjusted tensioner. TM series: TM 1300 – TM 1600 TM 1900, which can also ...
Working width: 2, 1.6, 1.8, 1.4 m
Power required: 40 ch - 80 ch
Weight: 435, 460, 500, 530 kg
The multi-purpose flail mower Mod TrisaR TR26 is the ideal implement for all requirements. Thanks to its patented SSA system it allows working with the best results and the highest degree of safety both on grass and on ...
ALPEGO S.p.A.
Working width: 2.5 m - 3.1 m
Lagarde
Working width: 0.8, 80 m
Power required: 30 ch - 100 ch
Weight: 458, 415, 353, 310 kg
The Spearhead Barrier Mower is the perfect tool for airfield, agriculture, amenity and highway applications for cutting under roadside crash barriers, fence posts, fence wires and round the base of trees. Available ...
Spearhead
Working width: 160 cm - 260 cm
... widths of up to 260 cm are used for the rugged frame construction of broad gauge mowers, which enables extremely high acreage performance. This makes broad gauge mowers particularly popular in the agricultural ...
Rapid Technic AG
Working width: 1.2 m - 2.1 m
The range of mowers BM blade offered by ACMA consists of seven models, suitable for different uses; the machine is used mostly for low powered tractors and for mowing grass fields with and without shrubs
Acma srl
Working width: 2.1 m
... with mounted models and standard with trailed models. Drum mowers rotation movement is harmful for the root of the crops. Disc mowers do not harm the crops as drum mowers. ...
Fimaks Makina
Working width: 2.45 m
... with mounted models and standard with trailed models. Drum mowers rotation movement is harmful for the root of the crops. Disc mowers do not harm the crops as drum mowers. ...
Fimaks Makina
Working width: 2.1 m
... with mounted models and standard with trailed models. Drum mowers rotation movement is harmful for the root of the crops. Disc mowers do not harm the crops as drum mowers. ...
Fimaks Makina
Working width: 2.85, 2.4 m
Power required: 61, 88 ch
PTO speed: 540 rpm
... durability. It facilitates easy hitching of the disc mower to the three-point linkage of the tractor, with high comfort and efficiency of work. •Mower bar side suspension is simple, but makes the mower ...
Working width: 3 m
Power required: 82 ch
PTO speed: 540, 2,750 rpm
SIPMA KD 3025 SPRINT rear-hitched disc mower with central suspension guarantee perfect ground copying and equal cutting height across the entire width of the cutterbar. SIPMA disc mowers are machines ...
APPLICATION AREAS MOWBLOWER is suitable for all inaccessible grassland areas and vegetal overgrowth, e.g. between field and meadow. Especially in ditches or back slopes, Mowblower demonstrates its strength. Frequent application areas ...
Working width: 500 mm - 1,150 mm
MRM finish mowers fit walk-behind tractors from 5 to 18 Hp (4 to 14 kW). They are light and easy to be mounted on any kind of walk-behind tractor by using the proper flange connections or customized joints. ...
Bellon Mit
Working width: 185 cm
... for best cutting result without stripes. -Cutting height is regulated by wide support skids with rounded edge. -The rotary cutter has approved protection that prevents from stone throwing both forward and backward. -Can ...
Working width: 275 cm
... frame, the toppers are great solution for cutting in varying areas and terraines. Model BP275 has three rotors that are mounted behind the tractor and has wider working width. Benefits: -Blasted and powder coated ...
Working width: 365 cm
... frame, the toppers are great solution for cutting in varying areas and terraines. Model BP365 has four rotors that are mounted behind the tractor and has the widest working width. Benefits: -Blasted and powder ...
Working width: 1,700 mm
Our Double Blade mower Machine is used to leave green pellet feeds like clover, common vetch, lentil, meadow etc. with barrel shape by means of barrel redirector which is connected to outer shoe after mowing them efficiently. ...
Working width: 1,650 mm
Our single blade mower; is used to leave green pellet feeds like clover, common vetch, lentil, meadow etc. with barrel shape by means of barrel redirector which is connected to outer shoe after mowing them efficiently. ...
Working width: 1,650 mm
Drum Mower Hisarlar brand drum mowers provides small or medium acreage landowners and hay producers with significantly improved capacity and productivity thanks to the quick and smooth cutting system. Hisarlar ...
Please specify:
Help us improve:
remaining