PTO-driven mowers

Working width: 2.55 m

The new Sarracenia front mower, with a 2.60 m cutterbar, is fitted with an innovative ground tracking system that reduces the impact of the cutter bar with the unevenness of the ground and guarantees both optimal cutting ...

Working width: 3.24 m

The new Sarracenia front mower, with a 3.20 m cutterbar, is fitted with an innovative ground tracking system that reduces the impact of the cutter bar with the unevenness of the ground and guarantees both optimal cutting ...

Working width: 1.65 m

The Crassula disc mower can be ordered in four models from the smallest 4-disc with a cutting width of 1.65 m. to the largest 7-disc with a 2.85 m cutting width. The advantage of this type of mower ...

Working width: 3 m

... tractors with left- or right-hand PTO rpm Servicing and spare parts Low operating costs Most of maintenance works to be done on user’s own Proven design More than 20 years of experience in manufacturing of disc mowers Own ...

Working width: 3 m

... tractors with left- or right-hand PTO rpm Servicing and spare parts Low operating costs Most of maintenance works to be done on user’s own Proven design More than 20 years of experience in manufacturing disc mowers Own ...

Working width: 3.9 m

... Most of maintenance works to be done on user’s own Proven design More than 20 years of experience in manufacturing disc mowers Own design of PerfectCUT cutterbar tested on markets across the world 2-year warranty

Working width: 1,000 mm - 1,500 mm

... The flail mower Fox can be fitted with different flails for grass or small branches cuttuning. Rear Mounted Side Shift Flail Mower for 15 to 30 Tractor HP. The FOX S Side Shift Flail Mower ...

Working width: 960, 1,120 mm

The Light flail mower mod. FROG is suitable for small tractors. The flail mower Frog is Rear mounted for 540 rpm on PTO, cut grass in small pieces (mulching) and is possible to cut ...

Working width: 1,000 mm - 1,500 mm

The flail mower mod. FOX is used for grass cut (Mulching) and verticut on grass fields. The flail mower Fox is Engineered to be mounted on light tractors three points linkage with low HP power and ...

Working width: 1,600, 2,000, 2,400, 2,800, 3,100 mm
Power required: 30, 35, 45, 50, 55 ch
PTO speed: 540 rpm

Proven Designed Cutter Bar Long Lasting Knives Lowe Running Cost Clean Forage Cut Kayhan Ertuğrul Mak. San. ve Tic. A.Ş, reserves the right to modify the technical characteristics and specification of its products without prior notice.

Working width: 245, 280, 210, 320 cm
Power required: 70, 90, 60, 100 ch
PTO speed: 1,000, 540 rpm

... mounted models and standard with trailed models. Drum mowers rotation movement is harmful for the root of the crops. Disc mowers do not harm the crops as drum mowers. In the disc mowers ...

Working width: 1,800, 1,700, 1,750 mm
Power required: 25 ch
PTO speed: 540 rpm

The machine is produced for harvest of all green forage type. It can be used in all kinds of tractors, hydraulically and mechanically. Increases yield in crops with more than one harvest per year such as clover. Does not miss the product ...

Working width: 125, 145, 165, 195, 250 cm
Power required: 20 ch - 80 ch
PTO speed: 540 rpm

It reaps all kinds of feed plants, grass, meadow grass, heath and wild plants bordering the roads with knives rotating at a high annulus velocity and existing in both of the 2 drums rotating reversely to each other and leaves them behind ...

Working width: 3.2 m
Power required: 60 kW - 90 kW
Swath width: 1.2 m - 1.8 m

Finally, a front mower conditioner with all the benefits of a trailed mower conditioner! The ELHO NM 3200 F front mower conditioner offers power, good handling, HydroBalance suspension ...

Working width: 3.7 m
Power required: 70 kW - 100 kW
Swath width: 1.2 m - 1.8 m

World’s widest front mower conditioner The ELHO NM 3700 F is the world’s widest single-beam front mower conditioner. With a cutting width of 3.7 metres, this model is extremely productive. The conditioner ...

Working width: 2.4 m
Power required: 50 kW - 80 kW
Swath width: 0.6 m - 1.4 m

Impressive flow through the unit with high driving speeds plus fast drying results! The ELHO NM 2400 VC (vertical centre) mower conditioner has all the important ELHO features built in! The centre-suspended cutting ...

Working width: 1.8, 2.1 m
Power required: 60 kW
PTO speed: 540 rpm

... uni mower was specially developed for use on steep slopes. The mower is intended as front attachment in the three-point hydraulic system for special slope carrier vehicles such as those from Aebi or Reform. The ...

Working width: 1.9, 2.3, 2.6, 3, 4 m
Power required: 33 kW - 90 kW
PTO speed: 540, 1,000 rpm

The Uni-mowers of the UM series are mowing and mulching units with diverse uses for use on tractors as of 44 KW (60 HP). The working widths vary between 1.90 m and 4.00 m. All units are available as rear-mounted units, ...

Working width: 2.8 m
Power required: 73 kW
PTO speed: 540, 750, 1,000 rpm

The UMG 2800 uni mower was developed as a mowing and mulching machine for use on fallow land, pastures or on maize stubble fields on tractors from 73 KW/100 HP upwards. The mower housing is made of high-strength ...

Working width: 2,650 mm

... 4900 mm Width - 3000 mm Height - 1700 mm Working Capacity - 15,2 ton / hr Number of Knives - 12 Number of Discs - 6 P.T.O. - 540 dev/min Disk turnover - 300 dev/min Tail shaft speed - 8-10 km weight - 1200 kg Tractor ...

Technicial Specifications - Mower interval - 1.950 mm Number of Knives - 8 Work cycle - 540 dev/dk Drum number - 2 Tail shaft speed - 8 - 10 km/hr Length - 3.200 mm Width - 1480 mm Height - 1.100 mm Work ...

Teknik Özellikler - Length: 4000mm Width: 920mm Height: 1100mm Working Width: 2700mm Tractor Power: 70-80HP P.T.O: 540 rpm Working Speed: 8-10 km/hr Num. of Drums: 4 pcs Cutting Blades: 12 pcs W.Capacity: ...

Working width: 1 m - 1.6 m
Power required: 18 kW - 37 kW
PTO speed: 540 rpm

... rear mounted,PTO driven flail mowers for tractors, working width varies from 1,000 to 1,600mm,power demand 25-50HP.FM series are designed for general maintenance of lawn,park,orchard,meadow ...

Working width: 1,650 mm - 2,050 mm
Power required: 37 kW - 52 kW
PTO speed: 540 rpm

... rear mounted,PTO driven flail mowers for tractors, working width varies from 1,650 to 2,050mm,power demand 50-70HP.FM series are designed for general maintenance of lawn,park,orchard,meadow ...

Working width: 0.45 m
Power required: 15 kW - 75 kW
PTO speed: 2,000 rpm

... Reservoir is not in need. This compact mower makes it best to be cost-effective with high efficiency. With the hydraulic cylinder controlled from the tractor’s hydraulics, Hydraulic Reservoir is not in need. This compact ...

Working width: 3 m

Keltec has designed the KM-300L mower series with productivity and grass quality in mind for agricultural and contractor users. The KM-300L mower series is available in three build configurations – plain ...

Working width: 9 m

The Keltec KM-600B butterfly mower-conditioner is the ideal solution for high capacity grass mowing and harvesting, when used in conjunction with a front mounted mower. The KM-600B butterfly mower ...

Working width: 3 m

The Keltec KM-300T trailed disc mower with conditioner has been designed and constructed with Irish grass conditions in mind. The simple and strong design of KM-300T makes it a popular choice for many.

Working width: 1.25, 1.45, 1.75, 2.25 m

For control of dense vegetation, long grass and woodland rides, the WESSEX WFM FLAIL MOWERS are a real tough performer and are perfectly suited to the job. Hammer flails pulverise tough material while a full width adjustable ...

Working width: 1.8 m

Available in 1.2m and 1.8m working widths, the STC collector is a true, all-year-round machine for the maintenance of public parks, large amenity areas, sports turf and private estates. Whether the requirement is for a flail collector ...

Working width: 135 cm - 270 cm

The Enorossi Sickle Bar Mowers come from an accurate study for a wide variety of uses especially in pastures. BF/BFT series with riveted guards and BFS series with bolted guards. All mowers are standard ...

Working width: 165, 185 cm

Rear-mounted drum mower available in two working widths (1.65 mt. and 1.85 mt.). High speed discs allow high quality cutting performances also in stony grounds. Mechanical or hydraulic lifting systems with cabin control, ...

Working width: 300 cm

The compact design allows the mower to adapt to any types of grounds. Standard windrower discs. Simple and practical spring compensation system Two strong compensation springs guarantee a uniform pressure on the ground ...

Working width: 15 m - 15 m

Working width: 2.9 m - 3.7 m

Working width: 8 m - 10 m

... cutting-quality Daily work on the grass fields requires reliable machinery. Durable disc mowers provide perfect stability, quick adaptability, and easy maintenance. The range of SIP mowers extends up ...

Working width: 1,150, 1,000, 1,350 mm
Power required: 18 ch - 45 ch
PTO speed: 540 rpm

TFL side drum mowers are extremely efficient and reliable. They fit tractors from 18 to 45 Hp (14 to 33 kW). They are extremely light and easy to be mounted on the vehicle. The compact design reduces possible bumps. The ...

Working width: 1,550, 1,350 mm
Power required: 18 ch - 45 ch
PTO speed: 2,000, 1,000, 540 rpm

TFA drum mowers fit tractors from 18 to 45 Hp (14 to 33 kW) with PTO speed 540/1000/2000 rpm. They are extremely light and easy to be mounted in the front of tractors with standard 3-point linkage Cat.1. ...

Working width: 1,000, 1,150, 800 mm
Power required: 10 ch - 25 ch
PTO speed: 540, 1,000, 2,000 rpm

TFU drum mowers fit compact tractors from 10 to 25 Hp (8 to 19 kW). They are extremely light and easy to be mounted in the rear or in the front of tractors with PTO speed 540/1000/2000 rpm and standard ...

Working width: 1,250 mm - 2,550 mm

... tractor and used in trail (front mounting or for tractors with reverse drive on request - indicate RPM and direction of rotation PTO) • Safety-protections and “CE” certification For the operation of this machine, ...

Working width: 1,300 mm - 2,500 mm

... tractor and used in trail (front mounting or for tractors with reverse drive on request - indicate RPM and direction of rotation PTO) • Safety-protections and “CE” certification For the operation of this machine, ...

Working width: 1,300 mm - 2,500 mm

... tractor and used in trail (front mounting or for tractors with reverse drive on request - indicate RPM and direction of rotation PTO) • Safety-protections and “CE” certification For the operation of this machine, ...