Sickle bar mowers

Working width: 1.45, 1.75, 2.05, 2.35 m
Power required: 25 ch
PTO speed: 540 rpm

... possible to cut on inclined contours, on embankments and ditches, thanks to the possibility of inclining the cutter bar down to -45°. A sickle bar following the field contours in the ...

Working width: 1.25 m - 2.25 m
Power required: 18, 25 kW
Swath width: 1, 1.4, 1.5, 1.6, 1.8 m

Rear-mounted tractor mowers with two moveable cutter bars designed for cutting all types of grass, forage plants and medicinal herbs, as well as for public utility works. This type of mower ...

Working width: 11 m

•Clear View •Excellent overview as the complete machine is in the drivers focus. Obstacles are detected without any difficulty. Benefit of maximum working width – no unnecessary overlap. •No overrun of upright food •Tractors with ...

Working width: 12.4, 13.4 m
Power required: 190 kW
Swath width: 1.8 m - 3 m

The FC 13460 RA mower conditioner offers a significantly higher work output than conventional mowing combinations. While the FC 13460 RA mower-conditioner can reach a working width of 13.40 m, it is ...

Working width: 2,100 mm

... reciprocating mower is used for reaping the grass which grows at the farm, forest or pastureland It works at the hill, sloping field or small field It controls by the tractor driver and it has the good working performance, ...

Working width: 0 cm - 140 cm
Power required: 8.7, 11.9, 6.8, 8 kW
Weight: 278, 297, 289 kg

The 622 PowerSafe® is a motor mower intended for farmers on small livestock farms and farms for intensive use where the much bulkier and more expensive combine harvesters could not work. Designed for mowing forage ...

Working width: 165, 210, 180 cm
Power required: 15 ch
PTO speed: 540 rpm

The SITREX Sickle bar Mower Series SB is a simple and reliable machine. Three working widths are available: 165 cm (5* 6") 180 cm (61) and 210 cm (7') to satisfy the requirements of small ...

Working width: 1,700 mm

Our Double Blade mower Machine is used to leave green pellet feeds like clover, common vetch, lentil, meadow etc. with barrel shape by means of barrel redirector which is connected to outer shoe after mowing them efficiently. ...

PTO speed: 950 rpm

... oscillating motion. This motion drives the blade of our mower deck with incredible power and precision. The M80 represents power, quality and a rich legacy of innovation. Combined with our cutting-edge mower ...

Working width: 91 cm
Power required: 5.5 ch

QUICK COUPLING:Standard STARTING:Recoil starter CLUTCH:Belt tensor SWEEPING WIDTH100 cm:SPEEDS2 + 2 ENGINE:Honda GX 200 gasoline PTO:With engage/disengage command TYRES:13.500-6 TRANSMISSION:Chain and belt DESCRIPTION A help ...

Working width: 165 cm

Sickle Bar Mower is mounted to tractors by three point linkage system and operated by pto of tractor. Sickle knife motion cuts the grass like a scissors cut which leads ...

Working width: 1,800, 2,100 mm

Agromaster Sickle Bar Mower is mounted to tractors by three point Linkage system and operated by PTO of tractor. By the help of tooth-blade motion system it makes possible a scissors ...

Working width: 87 cm

Power required: 5.4 ch
PTO speed: 1,017 rpm
Weight: 70 kg

Configured for a centrally mounted cutterbar, this lightweight and manoeuvrable machine is designed to meet the requirements of non-professional users. The machine is primarily used to cut grass and fodder crops and for general clearing ...

Working width: 71 cm

... tree-nurseries, orchards and anywhere were high shrubberies or trees restrict the available space, manoeuvrability of the finger- bar mower proves its usefulness. For winter services, the t40 can be upgraded ...

Working width: 180, 213, 274 cm

AVAILABLE IN THREE SIZES THE FARM KING SICKLE BAR MOWER WAS DESIGNED FOR SIMPLE OPERATION AND EFFECTIVE CUTTING. A dual-action cutter bar ensures a fast, clean and ...

M210 is performing and easy to handle, it is a motor mower that stands out for its double-blade cutting movement, i.e. a feature that enhances its performance and working speed. The double blade system allows the freshly ...

Working width: 180, 175 cm
Power required: 25 ch
PTO speed: 540 rpm

The ABOLLO SICKLE BAR MOWER, is connected to the tractor with 3 point suspension system and works by moving from pto shaft. There is an automatic back and up stretch system against the ...

Working width: 86 cm
Power required: 5.5 ch
PTO speed: 943 rpm

... The two available cutter bars ensure mowing any kind of grass and, apart from that, by means of a practical quick coupling, you can connect the 50 cm rotary cutter and the orientable 80 cm front blade. The ...

Power required: 6, 6.6, 7, 3.7 kW
Swath width: 110, 122, 137, 120, 130 cm
PTO speed: 965 rpm

... middle cut fingers sickle bars. The “type 2000” is a non-clog sickle bar recommended for tough, thin grass typical of mountainous areas and available in the following ...

Working width: 80, 100, 115 cm

... The cutter bars for the 515 L Grifon are available with a working width of cm. 80 and 100 in the “Laser” version and cm. 115 in the “Laser” and middle cut fingers versions. Besides the standard cutting operations, ...