Folding mowers

Working width: 9.5 m

... butterfly mower-conditioner is the ideal solution for high capacity grass mowing and harvesting, when used in conjunction with a front mounted mower. The cutting width of the KM-600B is 9.5m when paired ...

Working width: 10, 9.1, 8, 7.3 m
Weight: 680 kg - 1,160 kg

The SAUERBURGER DM Butterfly mower combinations are designed for high area outputs with relatively low power requirements. Due to the low power-to-weight ratio, the mower combinations can also be operated ...

Working width: 2.85, 3.2 m
PTO speed: 540 rpm
Weight: 850, 900 kg

.Quick fit blades .Hydraulic folding suspension .Swarth Wheels .Folding cover for easy access to cutting bar .Mechanical lock for transport .Drive Shield Module .Friction clutch and overrun protection .Walterscheid ...

Working width: 1,580 cm
PTO speed: 540 rpm

One of Yüksel Tarım’s original designs, the drum mower is designed with 8 blades. The biggest benefits of the design are that it saves fuel and time.

Working width: 1,350, 1,650, 1,900 mm
Power required: 30, 40, 50 ch
PTO speed: 540 rpm

It reaps all kinds of feed plants, grass, meadow grass, heath and wild plants bordering the roads with blades rotating at a high annulus velocity and existing in both of the 2 drums rotating reversely to each other and leaves them behind ...

Working width: 100 cm - 125 cm

... drum and 3 knives. Special designed tall drum convey cut material backward efficiently and speedy operation is expected. Folding backward for transportation Cutting frame can be folded to rear during transportation ...

Working width: 170, 190 cm
Power required: 25, 29 ch
PTO speed: 540 rpm

This mower gets a clean cut even under the toughest conditions and it has a reduced power absorption. The manufacturing quality of MORRA drums mowers is based on decades-long experience. Silent running ...

Working width: 1,800, 2,100 mm

Sickle bar mower is a three-point linkage mower that attached to the lower links and to the upper link bracket of the tractor. The blade is moved by three V-belts which will slide if a solid obstruction ...

Working width: 242, 284, 318 cm

... an easy and intuitive set up of the mower. With the “non stop” safety, standard equipped , the mower can continue to cut in the event of a collision without having to stop the tractor as the system ...

Working width: 285, 245, 210, 165, 320 cm
Power required: 43, 36, 30, 85, 55 kW
Weight: 340, 410, 500, 550, 600 kg

... 2.85m EOS 320 - 8 discs working width. 3.20m A compensating spring provides excellent adjustment to the weight of the mower reducing the pressure on the ground to ensure a perfect cut without damaging the grassy ...

Working width: 2 m

The LPS 20 open profile cutter cuts even thick branches with 4 circular saw blades at a working width of 2 m.

Working width: 165, 190, 210, 240, 270 cm
Power required: 10 ch - 15 ch
PTO speed: 540 rpm

The Sickle bar mowers DCM are very silent and have an high cutting quality. The Sickle bar mower BF is available in 5 different cutting sizes: 165 cm, 190 cm, 210 cm, 240 cm and 270 cm. Available versions ...

Working width: 2.85, 2.45, 3.23, 2.05, 1.67 m
Power required: 35, 40, 46, 52, 56 ch
PTO speed: 540 rpm

This SITREX mowers range, including 4 - 5 - 6 - 7 - discs machines, fits the requirements of small and large farms. The DM4 Disc mower, with 4 discs and 1.67m / 65" 3/4 working width is especially suitable ...

Working width: 540 cm

DRUM NUMBER: 6 BLADE NUMBER : 165 cm CUTTING WIDHT : 540 P.T.O ROTATION: 1919 REQURIED POWER OF TRACTOR Hp: 45 WEIGHT kg: 345

Working width: 165 cm

Sickle Bar Mower is mounted to tractors by three point linkage system and operated by pto of tractor. Sickle knife motion cuts the grass like a scissors cut which leads to a high speed operation on any crop. Also sickle ...

Working width: 1.66 m - 9.6 m
Power required: 26 ch - 95 ch
PTO speed: 1,000, 540 rpm

... FARMER SERIES - F Ideally suited to farmers with lower horsepower tractors or a limited amount of mowing to carry out, these mowers boast a host of features you would expect to find on larger, more expensive machines. PTO ...

Working width: 2.42, 2.9 m

The MAJOR Disc Mower has been designed to ensure you get a professional quality, clean cut every time. This machine allows a single operator to mount the mower onto the tractor quickly and easily without ...

Working width: 1,600, 1,800, 2,000, 2,200, 2,400 mm
PTO speed: 540, 1,000 rpm
Weight: 885, 982, 1,030, 1,075, 1,190 kg

Shredder with lateral displacement that lets you work with the whole machine outside from the tractor. The technical features of this machine make them particularly adequate for working at road ditches, margins and places where the ...

Working width: 2.1, 2.5, 2.8, 3.2 m

... was the Potato Planter we manufactured in 1984. We have also manufactured harvesting equipment for horse-drawn and tractor mowers , and hoe ridgers . The company has been developing its own designs since 1988. AKPIL’s ...

Working width: 105, 125, 150 cm

... Features: 1) Standard in-line front flail mower 2) Offset length (174 cm / 68.5 in) 3) To -45° angle ditch mower 4) To +90° angle bank and hedge mower 5) Available ...

Working width: 180, 150, 200 cm

... degrees upwards. The heavy flail makes it suitable for cleaning up in one single operation like wood, storage, dirt, etc. Folding up and pivoting can be completely hydraulically controlled from the tractor.

Working width: 2.25, 2.75, 3 m

... beyond the limits in the manufacture of flail mowers and other equipment. Sustainable materials and a well-thought out approach guarantee quality performance for a long time. With Herder’s boom flail mowers, ...

Working width: 10.4 m

The extraordinary wide R10 reel mower delivers perfect cuts at a high speed and a very low tractor power. The mower is especially designed to maintain big sod fields in the turf industry. It combines ...