Working width: 0.8, 80 m
Power required: 30 ch - 100 ch
Weight: 458, 415, 353, 310 kg
... The Spearhead Barrier Mower is the perfect tool for airfield, agriculture, amenity and highway applications for cutting under roadside crash barriers, fence posts, fence wires and round the base of trees. Available in front mount or ...
Spearhead
Working width: 240, 280, 320 cm
Power required: 65, 70, 80 ch
PTO speed: 540 rpm
... This mower has a center suspension system that makes ground following easier where the three-point linkage offers a significant reduction in transport sizes. The mower is available in 6 -7- 8 discs and it’s mostly suitable ...
Working width: 2.85, 2.4 m
Power required: 61, 88 ch
PTO speed: 540 rpm
... with high comfort and efficiency of work. • Mower bar side suspension is simple, but makes the mower perfectly follow the terrain with equal pressure on the ground. •Safety spring fuse allow for tilting the mower ...
Sipma
Working width: 1,250, 1,350, 1,650, 1,850, 2,500 mm
... this system to cut green feed plants (clover, grass plants, barley, oat, etc.) being opened by the effect of centrifugal force and leave on the surface of the field in barrel state. The Drum Grass Mowers ...
Working width: 318, 284, 242 cm
Power required: 60, 70, 80 kW
PTO speed: 540 rpm
... Trailed mower-conditioners – Flat and well-profiled cutterbar with oil-bath gears made of hard-wearing steel – round shaped discs – mower-conditioner unit with independent suspension from the frame – cutterbar with anti-wear ...
Working width: 2,450, 1,650, 2,005 mm
Power required: 50 ch - 80 ch
PTO speed: 540 rpm - 1,000 rpm
... Drum mowers rotation movement is harmful for the root of the crops. Disc mowers do not harm the crops as drum mowers. In the disc mowers there are oval discs located on the cutter-bar ...
DEMIR PACKING AND AGRICULTURAL MACHINERY
Working width: 1, 1.3, 1.5, 1.8 m
Power required: 13, 16, 17, 20 kW
PTO speed: 540 rpm
... guarantee the good and safe use on camping sites, orchards, sports fields, etc. On request, the UMT uni mower can be equipped as fine-cut flail mowers. The grass to be mulched is heavily crushed and ...
Gerhard DÜCKER GmbH & Co. KG
Working width: 1,000, 800, 700, 600, 500 mm
Power required: 8 ch - 18 ch
Weight: 55, 85, 75, 70, 60 kg
... MTP flail mowers fit walk-behind tractors from 8 to 18 Hp (from 6 to 14 kW). These tools have been designed to cut grass and small branches in vineyards, orchards and plant nurseries. They are extremely reliable, efficient, ...
BELLON M.it Snc
Working width: 1,250 mm - 2,550 mm
... irregularity • Gearbox adjustment 540 RPM (750/1000 RPM on request) • Right-side rotation - distribution of the grass towards the row (distribution of’ grass towards the carriageway on request) • Rubber safety device ...
AEDES COSTRUZIONI Srl
Working width: 30, 45, 60, 75 cm
Power required: 20, 25 ch
Weight: 160, 190, 210, 240 kg
... The IN-ROW AUTOMATIC GRASS CUTTER DB12 can work with confidence thanks to its automatic and dual controls positioned on the tractor. The machine is totally autonomous and can be applied to any medium. The in-row automatic grass ...
BFM
Working width: 150 cm
Power required: 40 ch - 90 ch
PTO speed: 540 rpm
... It is especially designed to offer the best performance in cutting and pulverizing corn stalks and other row crops, heavy grass from set-aside fields, tree prunings in orchards, municipal mowing and wherever professional, accurate and ...
Working width: 1,350, 1,650, 1,900 mm
Power required: 30, 40, 50 ch
PTO speed: 540 rpm
... It reaps all kinds of feed plants, grass, meadow grass, heath and wild plants bordering the roads with blades rotating at a high annulus velocity and existing in both of the 2 drums rotating reversely to each other and ...
Minos Agricultural Machinery
Working width: 1,000 mm
Power required: 8 kW - 14 kW
Weight: 90 kg
... rotary mower is adaptable to motocultivators whose handle bar can be turned for 780 degrees. The attaching element varies depending on the type of motor-cultivator. It is particularly suitable for mowing in vineyards, parks and other ...
Working width: 2.75, 3.15 m
Power required: 75, 125 ch
Weight: 680, 770, 760 kg
... powerfully sucked upwards and held in the movement of the knives, even in the event of damp weather. Once finely chopped, the grass is uniformly spread by means of the deflectors on the frame. ...
Working width: 18, 22, 27, 36 cm
Power required: 25 ch - 110 ch
Weight: 350, 400, 480, 640 kg
... powerfully sucked upwards and held in the movement of the knives, even in the event of damp weather. Once finely chopped, the grass is uniformly spread by means of the deflectors on the frame. Perfect Follow-up of the Land Whether ...
Working width: 2.7 m
Power required: 45, 85 ch
Weight: 550 kg
... allows the topper to be offset to the right rear of the tractor (standard). This position is then ideal to avoid driving on the grass before cutting it. This topper also works wonders on fields requiring a high finishing work on edges ...
Working width: 1,450 mm
Weight: 100 kg
... An uncomplicated cutting bar for the mowing of hay, grass, and trimming of bushes and hedges. Thanks to the side mounting and angle adjustment below ground level mowing of slopes is also possible. Guide plates under the bar support the ...
Avant Tecno Oy
Working width: 1.8, 2.1, 1.35, 1.5 m
Power required: 30 ch - 130 ch
Weight: 570 kg - 1,240 kg
... The Groundkeeper by AMAZONE is a mounted mower that offers impressive first-class quality and reliability. A tank capacity from 1,350 l to 3,500 l and working widths from 1.35 m to 2.10 m enable coverage of large surface areas. Above ...
AMAZONEN-WERKE H. Dreyer GmbH & Co. KG
... tractors. With the mowing decks, grass with a height of up to 100 cm can be mowed. The mowers are impressive due to their innovative technology with double mulch blades. These ensure a clean cutting pattern and shred ...
Working width: 100, 125, 145 cm
... Feucht highgrass between axle mowing decks, grass conditions of up to 100 cm in height can be mowed. DThis highgrass mower is attached between the axles of John Deere lawn tractors. This means the mower ...
Working width: 125, 140, 170 cm
Power required: 70 ch
... pattern is achieved with high grass conditions as well as with low grass heights. In addition, the decomposition of the mown material is accelerated thanks to the very good shredding of the grass cuttings. The ...
Working width: 1 m - 2.1 m
Power required: 20, 40, 50, 65 ch
Weight: 100 kg - 460 kg
... br>1205IL | 2.10 | Hydraulic | 65 | 6 | 460
Characteristics / Technical Specifications
- Category: Drum mowers, Grassland
- Mechanical or hydraulic folding depending on model
- Working widths from 1.00 m
Working width: 100 cm
Power required: 15 ch
... Front Flail mower for QUAD/ATV • With 15 HP engine with electric start •Adjustable wheels height • Electronically balanced rotor • High blade tip speed for a perfect cut • Manual ON/OFF-Handle for Transmission • Front Wheel ...
Working width: 117, 102, 82, 72 cm
Power required: 8 ch - 22 ch
Weight: 70 kg - 110 kg
... The ZRF rotary mower represents the ideal way of cutting grass for animal fodder. Its height allows grass and plants to be cut cleanly above the roots, leaving stems and leaves intact. The mower ...
ZANON Srl
Weight: 240 kg - 345 kg
... The DHS controlled effort system applied to our shredders, allows, thanks to the aid of a hydraulic piston, mowing grass without the use of tracers, directly via the contact on the plant of the cutting disc without making plant damage. Applicable ...
Working width: 70 cm - 140 cm
Power required: 8 ch - 22 ch
Weight: 130 kg - 205 kg
... machine is firm on slopes due to its runner. With the flail mower, an optimal cutting pattern is achieved. The result is perfectly manicured green areas. Optionally, the flail mower can be equipped with an insect ...
Working width: 1,720 mm - 4,300 mm
Weight: 180, 290 kg
... Inter-row mower LUCEK is designed for weeding control and cutting grass and shrubs around trees and it is an ideal option in berry plantation under the bushes, orchards, vineyards, fence posts, under solar panels, guard ...
Working width: 160 cm - 350 cm
Power required: 35 ch - 80 ch
Weight: 610 kg - 1,130 kg
It is an equipment which enables us to recycle fertilizers and to give the organic items that we gained from the soil back to the soil by shredding any plant residues on the soil (wheat, sunflower, corn, cotton stalks, pruned tree branches) and similar ...
the best suppliers