Power: 0.75 kW - 1.1 kW
Flow: 26 m³/h
Multi-channel impeller and double chopping system • Chopping system • Head: 17 m (56 ft) • Suction: 65 mm (2 9/16 inches) • Discharge: 40 mm (1 9/16 inches)
Power: 7.5 kW - 11 kW
Flow: 110 m³/h
Multi-channel impeller and double chopping system • Chopping system • Head: 29 m (95 ft) • Suction: 100 mm (4 inches) • Discharge: 65 mm (2 9/16 inches)
Power: 2.2 kW - 18.5 kW
Flow: 160 m³/h
Multi-channel impeller and double chopping system • Chopping system and anti-clogging screw • Head: 46 m (151 ft) • Suction: 100 mm (4 inches) • Discharge: 80 mm (3 1/ 8 inches)
Power: 60 kW
Flow: 1,225 m³/h
Pressure: 2.7 bar
.Versatile range available in 125mm (5′), 150mm (6″) or 200mm (8″) .Fixed or hydraulic adjustable lengths available 1.5m (5′) to 3.6m (12′). .Fully galvanised metal work for extended product life .Heavy duty Rogelberg gearbox (540rpm) .Low ...
Power: 45 kW
Flow: 818 m³/h
Pressure: 2.7 bar
.Versatile range available in 125mm (5′) or 150mm (6″) .Multiple lengths 1.5m (5′) to 3.6m (12′). Bespoke lengths available. .Fully galvanised metal work for extended product life .High quality Rogelberg gearbox (540rpm) .Low power ...
Power: 11 kW - 22 kW
Flow: 230 m³/h
Pressure: 1.3 bar - 1.8 bar
.User friendly IP*** rated control panel .Flexible manual, timer or float switch control system .Quiet running 3 Phase electric motors, minimum cattle disturbance .Soft start, power efficient motors 11kW (15Hp) to 22kW(30Hp) .Fully ...
... by feeding the slurry pump with a submerged turbo filler (or existing slurry pump). An uncompromised material selection gives you a pump with a long service life. AGM Submerged Grinder ...
Power: 2.2 kW - 55 kW
... flexible coupler. Characteristic of this robust pump is the double suction cutting device which ensures a reliable running of the pump. The pumps are equipped with a high-quality cutting ...
Power: 11, 17, 22 kW
Flow: 200 m³/h - 350 m³/h
Pressure: 2, 3.2, 3.8 bar
Reliable slurry pump in slurry pits and liquid manure tanks An additional system for slurry pits allows the pump to mix and pump the slurry in the pit. The submersible motor high-pressure ...
Code: 5860100 Drainage of solids max.: 10 mm. Maximum depth:10 m. Impeller and drive shaft: AISI 304. Tension: 230 V./ 50 Hz. Weight: 4,7 kg.
Power: 15 kW
Flow: 160 l/s
... electric submersible pumps for raising waste water. Expressly designed for pumping residential and industrial waste, in drainage lifting stations and water treatment plants. Single-and double-channel hydraulics or with ...
Flow: 21, 42, 72, 120, 180 m³/h
Single-stage close coupled electric pumps with axial inlet, scroll outlet and with impeller splined to the shaft.
Flow: 12.5, 17.5, 30, 45, 50 m³/h
Electric submersible pumps with vortex impeller for pumping clean water or sewage with small residual solids.
Flow: 95 l/s
With large through-passage, open multi-channel impellers and double chopping system in the suction. Reccommended for particulary heavy aoolications requiring a preliminary chopping of the solid material contained in ...
Flow: 95, 150 l/s
The vertical chopper pumps have wide through-passage, open multi-channel impellers and chopping system in the suction. They are driven from an external electric motor or cardan shaft. Version available ...
Flow: 60 m³/h - 300 m³/h
- tractor gear pump with adjustable cutter flange - spiral housing of GG25 - suction flange with ribbed inlet and irrotational function - high consistency impeller with blades - 2600min-1 - thick ...
Flow: 15, 30 l/min
Pressure: 3, 4, 5 bar
Impellerpump flow rate max. litres 15 l/min flow rate max. m³ 0,9 m³/h max. pressure 4 bar Inlet/outlet ¾" mt Impeller Perbunan® (NBR) , Bush material stainless steel (1.4404) Shaft sealing ring ...
The HyPump is an innovative water pump that pumps water without fuel or electricity using the energy of flowing canals to irrigate the fields of commercial farms. It can pump up to ...
Flow: 0 us gal/min - 190 us gal/min
Pressure: 0 psi - 45 psi
... CAUTION-WARNING: Please do not run pumps dry, restrict or reduce port sizes or dead head pumps. This could cause component failure to pump. No Flammables. - DO NOT USE WITH FLAMMABLE ...
Power: 75 kW - 179 kW
Flow: 27,250, 31,040, 34,840 l/min
Maxx-10: Ultra-High Capacity Lagoon Pump ONE BIG OUTLET The single 10” outlet operates at maximum efficiency, creating less turbulence and wear than multi-ported volute models. THE BIG GUN The 8” diameter cannon ...
Power: 7.5, 11, 15 kW
Flow: 5,100, 4,800, 5,700 l/min
Pressure: 1.3, 2, 1.8 bar
Submersible pumps AT/ATF/GTF Eisele submersible pumps AT have been produced by us since 1972 and are used in the agricultural and industrial sectors. Key data: •Simple installation •Highly efficient •For ...
Flow: 4,600 m³/h
Pressure: 25 bar
Volute casing pumps acc. to ISO 5199 Single Stage Pumps – LS, LC Horizontal single stage endsuction pump with closed impeller and oil lubricated bearing frame. Process ...
Power: 1 ch
... The milk pump is always installed below the Milk receiver. The 0.75 hp Milk pump is shelf cleaning type and has been engineered and manufactured exclusively from stainless steel parts .It consists ...
For weed control and spraying treatments in small and medium dimension crops, parks, gardens, vegetable plots, greenhouses or for water soluble detergent or paint distribution PETROL ENGINE Gearbox coupling or speed reduction pulley ELECTRIC ...
... loading Adjustable flow rate without damaging the pump Abrasion-resisting steel used in high wear areas. All stainless steel hardware used below liquid line for long life. Shear plate located close to the impeller ...
Power: 4 kW
Tsurumi engine pumps feature a heavy-duty, compact and easy-to-use design. Made with excellent materials, these engine pumps can withstand the harsh conditions of construction sites and elsewhere, offering ...
Flow: 30.3 l/min - 54.1 l/min
Pressure: 0 psi - 160 psi
... Modified impeller design develops higher pressure at lower RPM. Durable E-Coat finish provides extra corrosion resistance on all surfaces inside and out. Oversized bearings for extended pump ...
Flow: 5 l/min - 375 l/min
ELECTRIC SUBMERSIBLE PUMPS CASED VERSION 4” (SERIES 95 PR N/) >The submersible pumps series 95 PR N/ are the smallest in the wide range of submersible pumps produced by PANELLI and sumarize ...
Submersible Pumps Manure pumping is one of the toughest job for producers. As we know this reality, we build our submersible GP Series pumps to withstand the most difficult conditions so that you can ...
Flow: 340 m³/h
... cutting device. They are also going under the name ‘chopper pump’. Both types are rotary pumps, featuring a multi-channel impeller which allows to achieve pressures of up to 5 bar. The ...
Power: 0.6 kW - 1.1 kW
Flow: 20, 30, 80, 120 l/min
SIR IRRIGATION STATIONS SUBMERSIBLE PUMPS SUBMERSIBLE PUMP FOR 5” WELLS Material Outer shell, motor cover, seal holder disk, filter and fastening ring in AISI 304; impeller, difuser ...
Your suggestions for improvement:
Receive updates on this section every two weeks.