Power: 82 ch - 238 ch
... oil - High temperature of water - Level of cooling liquid - Control of working pressure - Stop the engine with timer - Water pump exclusion - Settings for high and low working pressure - Main functions > Engine number ...
Flow: 250 m³/h
Power: 7.5 kW - 22 kW
CHIOR VPH Long-Shaft Cutting Pumps with suction from above and double chopping tool excel through their high pumping capacity and cutting efficiency. The design of the pump housing, either made of cast ...
Flow: 1,080 m³/h
Power: 11 kW - 30 kW
Multi-channel impeller • Head: 16 m (52 ft) • Suction: 250 mm (10 inches) • Discharge: 250 mm (10 inches)
Flow: 340 m³/h
Power: 2.2 kW - 22 kW
Multi-channel impeller and double chopping system. On vertical frame complete with suction mouth. Equipped with motor support and flexible coupling for standard electric motors. • Head: 54 m (175 ft) • Suction: 100 ...
Code: 5860100 Drainage of solids max.: 10 mm. Maximum depth:10 m. Impeller and drive shaft: AISI 304. Tension: 230 V./ 50 Hz. Weight: 4,7 kg.
Pump characterised by high flow rates and low heads. The performance curve is a function of the R.P.M. and the slope of the blades. Power consumption increases with head increase and with flow rate decrease. Flow rate ...
Flow: 600 l/min - 6,900 l/min
The LP pump is characterised by the absence of the mixing system and the possibility of using lower power as compared to the LE series. The LP pump is also supplied with the "impeller system", it is used ...
Flow: 324 m³/h - 540 m³/h
Pressure: 10, 12.6 bar
Power: 2.5 kW - 119 kW
... you need to know more about it. There are two versions of CTS pumps: in horizontal or vertical use. Long shaft chopper pump EFFICIENT IN STAINLESS MATERIALS These vertical ...
Flow: 1,225 m³/h
Pressure: 2.7 bar
Power: 60 kW
.Versatile range available in 125mm (5′), 150mm (6″) or 200mm (8″) .Fixed or hydraulic adjustable lengths available 1.5m (5′) to 3.6m (12′). .Fully galvanised metal work for extended product life .Heavy duty Rogelberg gearbox (540rpm) .Low ...
Flow: 818 m³/h
Pressure: 2.7 bar
Power: 45 kW
.Versatile range available in 125mm (5′) or 150mm (6″) .Multiple lengths 1.5m (5′) to 3.6m (12′). Bespoke lengths available. .Fully galvanised metal work for extended product life .High quality Rogelberg gearbox (540rpm) .Low power ...
Flow: 230 m³/h
Pressure: 1.3 bar - 1.8 bar
Power: 11 kW - 22 kW
.User friendly IP*** rated control panel .Flexible manual, timer or float switch control system .Quiet running 3 Phase electric motors, minimum cattle disturbance .Soft start, power efficient motors 11kW (15Hp) to 22kW(30Hp) .Fully ...
Flow: 95, 150 l/s
The vertical chopper pumps have wide through-passage, open multi-channel impellers and chopping system in the suction. They are driven from an external electric motor or cardan shaft. Version available ...
Power: 5 ch - 100 ch
... -Purpose Loading Pumps Flush Pumps/ Transfer-Only Manure Pumps Jamesway offers a variety of pumps for special applications such as floor flushing, transfer of separated ...
Power: 75 ch - 140 ch
... developing a slurry pump with greater output than any pump already available. Since the introduction of the Super 350 in early 1995, this has proven to be the case for the many farmers and contractors ...
Flow: 30 m³/h - 1,200 m³/h
Vertical lineshaft pumps available with flanged drive head for electric motors, with horizontal right angle gear, with overgear driven by tractor p.t.o and with vertical pulley.
Flow: 5,100, 4,800, 5,700 l/min
Pressure: 1.3, 2, 1.8 bar
Power: 7.5, 11, 15 kW
Submersible pumps AT/ATF/GTF Eisele submersible pumps AT have been produced by us since 1972 and are used in the agricultural and industrial sectors. Key data: •Simple installation •Highly efficient •For ...
Flow: 400 l/s
Power: 400 kW
Vertical lineshaft pumps with submerged pump bowl, lineshaft and drive unit on the surface, for installation in deep wells or tanks. Featuring an extremely solid and reliable construction ...
... FAST, Load Fast High-volume delivery with fast agitation, transfer, and loading Adjustable flow rate without damaging the pump Abrasion-resisting steel used in high wear areas. All stainless steel hardware used below ...
Flow: 310 m³/h
Power: 250 kW
Suitable anywhere high pressure is required, such as lifting, refrigeration or heating plants, artificial snow or irrigation, washing systems and boilers. Low noise and high resistance to wear, thanks in part to the oversized ball bearings. ...
Power: 15 ch - 50 ch
... alternative for submersible pumps and mixers, EYS vertical shaft series pumps and mixers are the right choice for you. Thanks to it’s modular design, vertical shaft units ...
Flow: 75 m³/h
Power: 0.2 kW - 1.5 kW
... submersible electric 3,5 inch pump to prevent water backflow and reduce water hammer on the pump, protecting the impeller and diffuser.BG series pumps can be coupled with a 35OS motor.BG ...
Flow: 3,000 us gal/min
Power: 75 ch
... slurry pump has gained a reputation for being strong, Reliable and virtually maintenance free across the range. To improve mixing performance the off- set nozzle allows the slurry to be mixed in almost all directions. ...
Flow: 5 l/min - 375 l/min
ELECTRIC SUBMERSIBLE PUMPS CASED VERSION 4” (SERIES 95 PR N/) >The submersible pumps series 95 PR N/ are the smallest in the wide range of submersible pumps produced by PANELLI and sumarize ...
... variety of pumps from several leading manufacturers. AGM deep well pipe pumps in galvanized steel. Pumps are available both as nurse pumps and full pressure pumps, ...
... lubrication system at the top of the pump, control over the level of oil in the oil bath seals and filling the sealants with grease, the pump will not require the withdrawal from service. • The ...
Power: 55 kW
Tractor driven slurry pump Chops and mixes manure to a homogenous slurry For more information see our product data sheet or contact us. TP 270 is a tractor driven slurry pump which chops and mixes ...
Your suggestions for improvement:
Receive updates on this section every two weeks.