Mounted mulchers

Cutting width: 1.55 m - 2.2 m
Tractor power: 34 ch

... Well proven range of use -In orchards and vineyards -In horticulture -Landscape maintenance -In berry orchards -In nurseries -In sports facilities and parkways -For lawn maintenance at airports and on fallows -Mulching of roadside vegetation Cutting ...

Cutting width: 1.2, 1.5 m
Weight: 380, 450 kg

... The BERKY Mulcher is powerful and versatile. Thanks to the optional ­equipment with ­40 mm or 205 mm flails, the tractor mulcher ­unfolds its full potential when mulching grass, scrub and light woody plants­. The tractor ...

Cutting width: 1.25, 1, 0.8 m
Weight: 300, 201, 180, 165 kg

... -for grass / scrub up to Ø 2 cm -Direct drive via axial piston engine -Support roller for cutting height regulation -Double stone guard (plastic baffle plates and chain guard) at the front -simple impact protection (rubber apron) at the back -for ...

Cutting width: 4.6, 6 m
Tractor power: 100, 80 ch
Weight: 1,576, 2,450 kg

... Be ready for next year by quickly shredding crop residue from corn, beans, sunflowers and more. Pulverizes Stalks Heavy duty construction removes stalks and pulverizes them into pieces. Easy to Maintain Replaceable front cover provides easy access ...

Cutting width: 48, 60, 72, 84 in

... in vineyards, orchards, and recreation areas. Sturdy and compact, the Land Pride FM25 has an electronically balanced rotor mounted on spherical roller bearings. The rotor is driven by a three section Powerband® spring-loaded, self-indicating ...

Cutting width: 1.91, 1.6, 2.43, 2.13 m
Rotational speed: 1,000, 540 rpm
Weight: 378 kg - 555 kg

... fallow land, set-aside, pastures and meadows. •COMPACT •VERSATILE •ROBUST •RELIABLE The Sauerburg pasture and grassland mulcher ASTRAL is ideally suited for the maintenance of fallow land, set-aside areas as well as pastures and ...

Cutting width: 60, 80, 105 cm
Weight: 100, 115, 130 kg

... mulchers HEADS FOR 35-TON EXCAVATORS Standard equipment -adjustable three-position leveling roller -support skids -gear hydraulic motor -direct drive -CE safety guards Accessories -Third knife -Custom-made attack saddle -Drainage ...

Cutting width: 600 mm - 1,000 mm
Tractor power: 70 ch - 120 ch

The new shredder for inter rows BGP Green P series assures a great result against the growth of weeds in orchards and olive-yards. The machine is available in two versions, one with an automatic hydraulic sensor wire allowing to move the cutting head ...

... fallen material and mulches to leave a fine finish. Features for Reliability and Ease of Use - Teagle Flail Mowers and Mulchers have a range of features to ensure ease of operation and straightforward maintenance for a long and trouble-free ...

Cutting width: 50 cm - 120 cm
Rotational speed: 540 rpm
Tractor power: 20 ch - 30 ch

... Rear shredder ideal for grass and vine shoot with a cutting diameter max. Ø 2 cm. Designed for tractors from 20-30 hp 15-22 kW. Provided with three-point hitch and reversible gears box, of mechanical lateral movement series, rear roller regulation Ø ...

Cutting width: 1.55, 1.8, 2 m
Rotational speed: 2,230 rpm
Tractor power: 18 kW - 23 kW

... Mulchers for orchards and vineyards are a type of agricultural mulcher and are primarily designed for shredding of plant residue after pruning and for weed and grass in orchards and vineyards. Beside their basic purpose, ...

Cutting width: 80 cm

... Introducing the Hammer Mulcher, the newest and most robust addition to our mulcher family. Built on tradition, it is designed for precision, power, quality, and durability. Instead of a standard rotary blade, the mulcher ...

Cutting width: 1 m - 1.2 m
Tractor power: 20 ch - 24 ch

The Agribiz adjustable mulching machine is specially designed for mini tractors in India. The use of the adjustable mulching machine ensures the germination and growth of any type of crop such as tomato, watermelon, strawberries, etc. This machine also ...

Cutting width: 158 cm - 312 cm
Tractor power: 50 ch - 150 ch
Weight: 610 kg - 1,180 kg

... •Mechanical anti-shock system •Electronical balancing of the rotor OUR STRENGHT 194 mm oversized rear roller Angle counter-blade Dual body in grip Internal rotor construction Double rotor balancing Traversing on self-lubricating ...

Cutting width: 150 cm
Tractor power: 40 ch - 50 ch
Weight: 290 kg

... This machinery, given its width, can be used as a single passage – it is designed to meet all the operations involved in working in vineyard, in hazelnut groves and in orchards such as mowing any type of grassing or grass of any height. Suitable for ...

Cutting width: 1.6 m
Weight: 350 kg

... Hydraulic chain cutting head for boom machines! The Tornado L is a cutting head with two chains that is suitable for boom machines. The cutting head is designed for use with excavators, forest loaders and other machines with sufficient hydraulic output. The ...

Cutting width: 1.4, 1.8, 2.3 m
Tractor power: 40 ch - 2,000 ch

... The MJ is designed for a working width of 1.40 to 2.30 m (depending on the model). It is equipped with single or double transmission via a double chain, dependent on the tractor power and a rear roller. The 1.40 m machines are ideal for micro-tractors. ...

Cutting width: 1.65, 1.95 m
Rotational speed: 540 rpm
Tractor power: 40, 70 ch

... Identical in design to the vegetable strippers, it differs in that its rear roller takes the height reference from the plastic film. It allows the film to be cleaned after harvesting in order to facilitate its recovery. OPTIONS Trimmer discs Use ...

Cutting width: 155 cm - 235 cm
Tractor power: 85 ch - 250 ch
Weight: 1,350 kg - 1,880 kg

... HIMEV Ecotritus HP family is Heavy-duty equipment. A robust PTO-driven mulcher for heavy applications. For tractors from 85 to 250 HP and 3-point hitch CAT II. The HP mulcher-heads are used in rear-mount and also ...

Cutting width: 120 cm - 223 cm
Rotational speed: 540 rpm
Tractor power: 18 ch - 85 ch

... The FX model is suitable for grassy mantles, runners and stones until 6 – 7 cm of diameter. It is a mulcher with fixed hitch, to be mounted on the three points of the rear hydraulic lift of tractors, with a power from ...

Cutting width: 123, 103 cm
Rotational speed: 540, 1,000 rpm
Tractor power: 15 ch - 25 ch

The Flail Mower Series T5 is a lawn mower used for the maintenance of grassy grounds in gardens, parks and golf courses, ideal for small power tractors. Equipped with spatulas that allow you to cut the grass and small residues of twigs (max. Diameter ...

Cutting width: 100, 125, 150 cm
Rotational speed: 540 rpm
Tractor power: 15 ch - 40 ch

... The FL-2 series flail mower, a versatile, light weight, and compact machine for small tractors, is particularly well suited for lawns, small parks and playgrounds. Available in three sizes; cutting height is adjustable. Two transmission belts. ...

Cutting width: 105 cm - 180 cm
Tractor power: 22, 26, 29 kW

... Suitable for grass and shoots (0 2-3 cm) Technical spécifications and standard equipment • - maximum horsepower: 50 HP (36 KW) • - PTO: 1 speed 540 rpm: 2454 rpm • - 3 belt transmission • - fixed counter-blades • - rear roller (0 133 mm) for cutting ...

Cutting width: 130 cm - 260 cm
Tractor power: 40 ch
Weight: 240 kg - 350 kg

... •Rear or front increased frame 100 x 100 x 8 with 3-point linkage and galvanized widening complete of vertical wires mower head with rotor endowed with 28 nylon wires for mechanical weeding (total 140 mt of wires) •RH wires mower with hydraulic tipping ...

Cutting width: 85 cm - 155 cm
Rotational speed: 540 rpm
Tractor power: 12, 35, 15, 20 ch

... The TR6 series includes all shredders for pruning and grass, suitable for cutting small remains of pruning, brushwood and brambles, as well for grass mowing. They allow to achieve a finely cut and scraped rest also by starting from hard or resinous woods. The ...

Cutting width: 80, 93, 106, 132, 158 cm
Tractor power: 12 ch - 30 ch
Weight: 130, 139, 146, 170, 195 kg

... This flail mower is designed for semi-professional use and works well with low HP tractors as it is light and flexibile. It can be used to cut grass, weeds and small bushes. STANDARD FEATURES •3 POINT HITCH, CATEGORY 1 •ALUMINUM GEARBOX 540 RPM WITH ...

Cutting width: 120 cm - 240 cm
Tractor power: 35 ch - 120 ch

Works on herbaceous and shrubs from 3 to 5 cm, the models are manufactured fixed or moveable laterally, its use both in gardening and in small farms, vineyards and green spaces in general. They allow a perfect shredding, as well as a fast and effective ...

Cutting width: 180 cm
Tractor power: 99 ch

... Rayco’s new C100R Forestry Mulcher is the answer if you’re looking for a purpose-built mulcher but need the versatility of rubber tracks. Our customers demanded a mulcher that was capable of crossing ...

Cutting width: 135, 150, 180, 210 cm
Tractor power: 34, 41, 25, 28 ch

... Chopper for both front mount and attachment behind the tractor. The rpm can be changed by rearranging the positions of the V-belt discs. The VARIOCHOP pruning chopper is an extremely powerful machine, suitable for prunings up to 8 cm (3.2’’). Because ...

Cutting width: 36, 52 in
Weight: 2,965, 3,675 lb

... Fecon Disc Mulchers are the perfect attachment for locations where speed and efficiency are the priority. The bidirectional feeding and snipping made possible by a hinged door increases effectiveness and productivity. The disc mulcher ...

Cutting width: 61, 73, 86, 96 in
Tractor power: 25, 35, 50 ch

... Tough enough to be a Rhino with outstanding mowing performance. These new models offer four configurations to match your tough conditions. Our RSM5 and RSM6 models use fine cut grass blades to provide an outstanding cut quality and up to 1” diameter ...

Cutting width: 1.65 m - 2.05 m
Rotational speed: 540 rpm
Tractor power: 37 kW - 52 kW

... FMH series are rear mounted,PTO driven flail mowers for tractors. working width varies from 1,650 to 2,050mm,power demand 50-70HP.FMH series can be typically aggregated with tractors with 3-point hitch of Cat.Ⅰ or Ⅱ.Flail shaft is driven ...

Cutting width: 48 in
Tractor power: 25 ch - 50 ch

... The 300 series is our most light weight fixed tooth brush mulcher for 3-point hitch tractors. With low ground speed the MP348 Brush Fire brush mulcher will efficiently cut heavy vegetation and light brush using Green ...

... The KÖPPL forestry mulcher impresses with its sturdy steel construction, which is familiar from Köppl products. A robust machine for mulching twigs, branches and trunks up to a diameter of 8 cm, thanks to a mulching rotor that rotates ...

Cutting width: 5'00", 7'00", 43'00", 6'00"
Tractor power: 40, 50, 55, 60 ch

The Vrisimo 300 Series Brush Shredder is the perfect mid-range flail brush shredder for light to medium-sized projects in an orchard or vineyard application. This machine ranges in size from 43 inches to 7 feet and features an adjustable rear roller to ...

Cutting width: 814 mm - 1,808 mm
Tractor power: 20 ch - 60 ch
Weight: 245 kg - 400 kg

... For the chopping of grass, light-medium prunings, vegetal residuals in general • Rear roller • Axles with nut • Counterblade Pair of fix skids Pair of front iron supporting wheels Ø 190 Rear rake ...

Flail mower attachments for both skid steers and excavators. Constructed with toughness in mind to provide a solution for operators in need of a strong and lightweight attachment that won't unbalance your machine. Known for their quick spin up, long lifetime, ...

Cutting width: 125 cm - 190 cm

... Fisarmonica is the Italian word for accordion. This mulcher comes equipped with two lateral wings which can be hydraulically expanded and contracted and function independently of one another. This enables a continuously variable swath. ...

Cutting width: 1 m
Tractor power: 12 kW

... copy cylinder. Variant for straw crushing and variant combi (grass - straw): for mulching of straw or straw + grass, the mulcher is constructively modified. In addition, we have a contra-rotating cutter, the back cover is hinged and ...

Tractor power: 50 ch - 80 ch

... -Variable -Stable -Agile The variable mulcher for wine and fruit growing works excellently in vegetation management and is also suitable for shredding vine cuttings. It is driven by a 540 rpm PTO and a factory supplied cardan shaft ...