- Small Farm Equipment >
- Grounds care equipment >
- Mounted reach mower
Mounted reach mowers
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
The Mower-Hark-Combi is perfect for working trenches in just one operation. The front-mounted cutter bar cuts the vegetation in an environmentally friendly way. The rear-mounted belt ...
Working width: 1.2 m
... attachment is designed for professional use in water maintenance. The reach of up to 9 m from the centre of the vehicle is just as convincing as the swivel range of 220°. Even difficult-to-reach areas ...
Working width: 1.2, 1.5 m
HYDRO FLAIL MOWER WITH HYDRAULIC FLAP AND CLEARING BELT The premium model of the 5600 series combines the power and working comfort of the BERKY mulcher for tractors with a powerful conveyor belt. The hydraulic tipping ...
Working width: 1,300 mm
Brushcutter 1.3 - Hydraulic side arm with 32 hammers Bi-directional operation of the mulcher head Floating system for self-levelling to the ground Hydraulic rotation with safety device 1300 mm working width, 1100 kg weight For tractors ...
Working width: 1.6, 2, 1.2 m
The new Raptor verge mower is the ideal choice for users who have a dedicated shoulder mowing operation to perform. The Raptor can be front mounted allowing the fitting of a Bomford arm mower ...
BOMFORD Turner Ltd.
Working width: 1.2 m
... tool holder must be equipped with a crushing head or cutter bar ( see " Accessories / Wear " at the bottom of the page ) •Reach to tractor: 2,50 - 2,60 m depending on equipment •3 point linkage cat 1 or 2 •PTO speed ...
Majar
Working width: 1.3 m
... tool holder must be equipped with a crushing head or cutter bar ( see " Accessories / Wear " at the bottom of the page ) -Reach to tractor: 3 - 3,20 m depending on equipment -3 point linkage cat 1 or 2 -PTO speed ...
Majar
Working width: 50 cm
Crushing head for toolholder RBEP25. •Reach to tractor on RBEP25 : 2,50 m •Crushing head with articulation of 186°, hydraulic control and floating position •Helicoidal rotor •Rotation speed of rotor : 3000 tr/mn. •Cutting ...
Majar
Working width: 495 cm
... perfomance hydraulic motor · direct transmission · dual direction cutting with adjustable and professional roller Ø 120 mm mounted on labyrinth-protected • automatic lifting of 1st arm, manual repositioning • easy handling ...
Dragone S.r.l.
Working width: 460 cm
... perfomance hydraulic motor · direct transmission · dual direction cutting with adjustable and professional roller Ø 120 mm mounted on labyrinth-protected • automatic lifting of 1st arm, manual repositioning • easy handling ...
Dragone S.r.l.
Working width: 500 cm - 550 cm
... perfomance hydraulic motor · direct transmission · dual direction cutting with adjustable and professional roller Ø 140 mm mounted on labyrinth-protected • automatic lifting of 1st arm, manual repositioning • easy handling ...
Dragone S.r.l.
Working width: 50 cm
The Brushcutter for vineyard is designed for multiple uses in the vineyard to solve more quickly and precisely machining in inter-row areas, for cutting the grass and to remove the sideshoots. The methodology of construction of this ...
Working width: 80, 105 cm
Hydraulic brush cutter. Suitable for cutting grass, vegetation in general, shrubs, and branches. Standard equipment -PTO 540 g./min -Remote control console with lever operation -Cutting head unit -Rotor with helical cutting blades -Reversibility ...
Gruppo Rapisarda Ubaldi
Working width: 105, 125 cm
Hydraulic mower. Suitable for cutting grass, bushes and prunings.
Gruppo Rapisarda Ubaldi
Working width: 105, 125 cm
Professional hydraulic brush cutter. Suitable for cutting grass, vegetation in general, shrubs, and branches Standard equipment -PTO 540 g./min -Remote control console with lever operation -Cutting head unit -Safety shock absorber ...
Gruppo Rapisarda Ubaldi
Working width: 150 cm
Our Garden compact range for cutting hedges and bushes. Suited for 18/30 HP tractors.
MAROLIN DECESPUGLIATRICI IDRAULICHE SRL
Working width: 48 cm
Hydraulic mower for excavator for professional use, has a compact design which makes it suitable for a very quick and precise cut, guaranteed by 24 nylon wires (which can be increased up to 42), fixed to a head controlled ...
- Mounting on standard tractors: Simple mounting and dismounting - The driver has a perfect view of the working tool - 140º operating plain of the arm allows incredible flexibility in different working situations. Twiga Flex has ...
GreenTec A/S / Spearhead
... arm geometry - Lightweight and compact - Wide range of working tools Spearhead Twiga Compact 320 and 420, is a compact reach mower designed for compact tractors. The Twiga can be used anywhere in the ...
GreenTec A/S / Spearhead
The Twiga MID range of Reach Arm mowers are amongst the strongest in their competitive category. Aimed at agricultural, contracts and municipal operators the 8 models cover reaches from 5.0 - 7.0 metres. ...
GreenTec A/S / Spearhead
Working width: 3 m - 6.9 m
... bronze bushings in the joints Optional: -Working tools -Lopper, ground drill, flat mower head, ditch cutter, hedge trimmer, delineators washing brush, flail mower head, stump cutter, weed brush Technical ...
FIEDLER Maschinenbau und Technikvertrieb GmbH
Working width: 80, 100 cm
The FALCON 200 is ideal for medium-power tractors (35-50 hp) with a minimum mass of 1,500 kg, for cleaning ditches, roadsides, embankments, hedges and parks. It is available in eight versions, with boom lengths ranging from 3,150 mm to ...
Tecnoagri
Working width: 100, 125 cm
The EAGLE 300 is ideal for medium and large tractors (70-85 hp) with a minimum mass of 2,500 kg, for cleaning ditches, roadsides, embankments, hedges and parks. It is available in six versions, with boom lengths ranging from 4,550 mm ...
Tecnoagri
Working width: 100 cm
GADWALL 400 is ideal for medium and high-powered tractors (70-85 hp) with a minimum mass of 2,500 kg, for cleaning ditches and working in vineyards with its triple digging arm. It is available in two versions, with boom lengths ranging ...
Tecnoagri
Working width: 1.2 m
Working width: 1,000 mm - 1,300 mm
Two arm boom mower with two-directional cutting head engine, double high-performance hydraulic system, in-cab remote control system, hydraulic cushioning with 100° rotation. Floating head system, height ...
Tifermec Srl
Ferrand
Working width: 0 cm - 200 cm
JUMBO weighs 900 kg, which allows you to carry it with small capacity vehicles like trucks with license B or trailers towed by car The load that JUMBO is able to lift is 500 Kg JUMBO has four drive wheels each of which is driven by a ...
Working width: 105 cm
Hydraulic reach mower with first lower arm attachment, suitable for users who need to reach more depth and distance. Frame in cast metal guaranteed with 3 years warranty. Mechanical safety ...
Hydraulic reach mower with attachment of the first central and high arm to overcome road signs and guard rails. Mechanical safety system on the second arm and quick release to the lift. The reach ...
Working width: 60, 80, 102, 122 cm
Reversible bush cutters with hydraulic arm, suitable for mini-tractors with rear power lift or reversible direction of movement. Ideal for the upkeep of both public and private parks and gardens. Standard Features Shock-proof device ...
Agrimaster
Working width: 640, 840, 1,080 mm
... designed for mini-midi excavators with operating weight up to 5.5 tons. The built-in-unit carpentry in our DA (standard) flail mower series, allows it greater resistance to possible accidental impacts. The anti-shock ...
GHEDINI ing. FABIO
Working width: 650, 840, 1,080 mm
... models are available in operating widths of 650, 840 and 1,080 mm. The built-in-unit carpentry in our DA (heavy) flail mower series, allows it greater resistance to possible accidental impacts. The anti-shock and ...
GHEDINI ing. FABIO
Working width: 1,300 mm
... support roller make the brush cutter able to work in both directions. The built-in-unit carpentry of our DB Series flail mower, allows it greater resistance to possible accidental impacts. The anti-shock and anti-cavitation ...
GHEDINI ing. FABIO
Working width: 3.2 m - 8.9 m
... professional solutions; Spearhead’s TWIGA series really is the first choice for all of your reach mowing needs. Spearhead boasts one of the most extensive fleets of reach mowers available ...
Spearhead
Hydraulic arm KR-600Z can be connected with almost every hydraulic head from ROLMEX,s offer. KR-600Z is designed for professional users and used in all ground conditions (even in the hard ones!). Thanks to its robust construction and ...
Hydraulic arm KR-520 can be connected with almost every hydraulic head from ROLMEX,s offer. KR-520 is designed for professional users and used in all ground conditions (even in the hard ones!). Thanks to its robust construction and the ...
Working width: 125 cm
... brushwood are split up by the chains and for extra fine cutting there is optional knife set. The mulcher has long offset reach and floating position upwards which allows good ground tracking. Big movement pattern The ...
Working width: 125 cm
... brushwood are split up by the chains and for extra fine cutting there is optional knife set. The mulcher has long offset reach and floating position upwards which allows good ground tracking. Big movement pattern The ...
Working width: 200 cm
... brushwood are split up by the chains and for extra fine cutting there is optional knife set. The mulcher has long offset reach and floating position upwards which allows good ground tracking. Big movement pattern The ...
Designed for an annual use of between 300 and 500 hours the Dextra range of flail-mowers perfectly fulfils the requirements of local authorities, communities and vegetation maintenance contractors. Numerous NOREMAT ...
NOREMAT
Working width: 75 cm
... supporting wheels, height adjustable, manual height and tilt adjustement, mechanical reach-adjustment, mower head of 75 cm length, mechanical spring-device for IN/OUT swing of the mower ...
BERTI Macchine Agricole S.p.A.
Design Arm mounted to tractor’s rear 3-point linkage Additional stabilizing brackets (KWT, CAMEL) High suspended original arm enables safe drive over obstacles Opened cover on hydraulic and electrical units Hydraulic ...
SaMASZ Sp. z o.o.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how AgriExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining