Pre-pruners

Cutting length: 21, 77 cm

The VSL 07 P is the lightest model in the Binger Seilzug range of Pre-Pruners. Counter-rotating shearing discs cut the vines at the desired height. The exposed shearing discs are not susceptible to blockage ...

Work more cost effectively with the pre-pruner. Its simplicity provides fast and efficient work, as well as low maintenance. Cost-effective Working speed up to 5 km/h (3MPH) for optimum work, even ...

Cutting length: 0 cm - 450 cm

Pruning Machine BGP 4000 that can lower when there is an overhead irrigation system, in order not to damage sprinklers.

The new BMV's dry pruner model "PR200" enables to contain the production costs and to reduce the labor, nowadays lacking and too expensive. It’s suitable for the pruning of the "espaliers", "Guyot" and "spur pruned cordon". The ...

Machine suitable for prepruning, chopping and disposal of branches between the wires. The cutting discs work between the wires of the espalier without damaging them and open the way to the passage of the posts through a switch installed ...

Cutting length: 22 cm - 92 cm

Pre-trimming machine TERRAL: main points Easy to use, light Easy maintenance Cutting height adaptable, thanks to: Disk addition Change of the interval between 2 disks of the same stack Cutting disk in special steel Adjustment ...

Cutting length: 3 m

PRE-PRUNER / JYRAFA Articulated pre pruning before for size dry and green. Machine with four hydraulic functions, which allows optimum adaptation to any working condition. Parallelogram ...

Scope of supply Double frame with cutting discs Lower bearing with push-in tube for cutting-head extension Control block/manual release Protective flaps at rear/protective screen in front Central mounting, 22 mm dia. For 12 V supply Connections ...

The machine, that can be used especially on runner-system or guyot type support structures, is made by a tunnel frame on which two cutter bars (double-blades), enable to cut the strongest vine shoots, are applied. The machine has also ...

Cutting length: 230 cm

The CPF 60 Orizzonti pre-pruner is a pruner for vineyards and orchards with fixed arm mounted to the front of the tractor equipped with motorised steel press branches barrel rod (PATENTED) ...

... , above the fruit bearing cordon between the support wires of the row: this allows a final spare of 70/80% on labour costs. Pre-pruning machine consisting of 9 pairs of cutting discs (working capacity 80 cm approximately) ...

The operation - A feeding disc pushs the vine shoots towards the side, a transfer chain pulls the said shoots between wheels which ones finish the extraction from the side. - The vine shoot extractor VSE 430 might be attached to any ...