Rollers

Sheet metal compacting roller for medium-sized surfaces Three section compacting rollers, made up of helical-welded sheet metal, assembled on sealed bearings and with hydraulic shrinkable frame for its ...

They destroy stubbles, especially those of high and strong canes, like as sunflowers or corn.

... precise and high-performance quality roller It handles all roller tasks before and after sowing and can also be used as a packer for a stubble or seedbed preparation. MINIMAX is our smallest hydraulic ...

The FACA Roller is used to put down and damage cover-crops in order to make it decay. It is important to have the right settings to hurt plants but leave the soil intact so weeds won’t germinate. It is possible to increase ...

... The flat-profile rollers are particularly supple to permit maximum self-cleaning even in wet conditions. They are used for different types of soils and applications, working surface soil more than deep soil. The large-diameter ...

* Level rutts and humps after the wet season on sports fields and paddocks alike. * Add water to increase weight for spike penetration in hard soil. * Pasture renovation, aerat pasture and turf, incorporate line and fertiliser to ...

... difference in diameters of the tube and the roller wheel allows the roller to move up and down as it travels in the field, ensuring better integration with the surface. Cambridge rollers ...

HYDRAULICALLY WIDTH-ADJUSTABLE GREENING ROLLER Can be combined with 2S/3S roller hoe. Working width hydraulically adjustable from 1. 2 - 1. 7 m. In addition, the width of the two 50 cm wide rollers ...

OSCILLATING COMPACTION ROLLER With hydraulic opening of the side sections and hydraulic tipping for positioning during work, the side sections oscillate in the central part, allowing them to perfectly adapt to the unevenness ...

GROMIX Aggressive soil roller is designed for rolling green grass before and after sowing and all kinds of rolling works. Aggressive rings are made of ductile cast iron for exceptional strength and durability. These shafts ...

... with clip on top of the tractor hitch - support leg - wheels 10/75-15.3 - transport protection - the three sections of the roller - all versions with hydraulic folding, drawn Options - Cambridge ø 450, 500, 530, 600mm ...

MODELS: 2.00 / 2.25 / 2.50 / 2.75 / 3.00 / 3.50 and 4.00 m. They only lose 5cm in width relative to total width of the work.Equipped with wheels of 215/75 R15 o similar. Made of flat sheet or sheet and angle. Diameter: 500, 600 or 700mm.

JACEK cultivation and meadow rollers, hydraulically folded, are pulled with modern machines, in which we use the following working elements: • Cambridge rings with a diameter of 500, 530 mm, they are primarily intended ...

Standard equipment • 3-point linkage cat. II and III • Two rows of knife rollers • Working width 2,95m • Curved cutting blades made of high-quality steel • Diameter of single knife shaft Ø 360mm • Rubber protection ...

With its self-directional system and its Ø 580 spiral wound from 40 to 45 °, the crumbling work allows an optimum result at medium depth. Equip it with 45X12 tines to improve its efficiency and homogenize the tillage. The frame •3 ...

Our rolling cultivator RH/ ROMEO is a modular and sectional machine, proper for every type of cultivation in rows. Thanks to its strongness and versatility the model RH/ reaches working speeds from 10 to 20 km/h. This allows to reduce ...

Mechanical drive-assist belt pressure roller •Stable frame with three-point hitch Cat. 2 •Working width 1,500 mm •Belt size 11.5/80 – 15.3/10 PR size Ø 850 mm •Total weight approx. 520 kg ZIBO HYDRAULIC DRIVE-ASSIST ...

A TRAILED PACKER FOR FINISHING FIELD SURFACE CUTTERPACK CT is a trailed packer with a working with of 4.6-6.3 metres, consisting of two rows of proven interlocking cutter discs. The packer is suitable for aggregation with BEDNAR TERRALAND ...

VEGA II Cambridge rollers can be used to press the soil after sowing, if using spring levelling tines (crossboard) the machine can also be used to level the rough furrow for soil preparation before sowing. The large diameter ...

CUTTERPACK CT is a trailed packer with a working with of 4.6-6.3 metres, consisting of two rows of proven interlocking cutter discs. The packer is suitable for aggregation with BEDNAR TERRALAND TO chisel ploughs, FENIX FO deep cultivators, ...

The heavy self-supportion roller TORO has been made for tamping, crumbling and levelling of the soil. It is specially used to improve the soil-seed contact after sowing or soil-root contact after winter frost, to avoid ...

Cut, crushed and left on the surface residual plants. Best for sunflower and rape. To cope with the residual plants on the surface of the ground without destroyingthe roots. The root of the stubble is kept in the soil which minimizingthe ...

Free Form Swath Rollers reduce crop loss by minimizing the effects of wind damage. The patented adjustable width roller enables the operator to easily change the roller width which forces ...