Other pumps

Flow: 56 m³/h
Pressure: 1.8 bar

In the context of an increasingly demanding market, where the quality of materials and performance are crucial, technological innovation is the key to ensuring efficiency and safety. From this need arises the PIUSI PANTHER EX, the new ...

Flow: 25 l/min - 72 l/min
Power: 8 ch - 13 ch

two tyre galvanized frame with manual handle to move the motor pump, standard engine drive and hand starting, suction and delivery flanges on the pump.

Flow: 1,000, 2,000 l/min

Ideal solution for mixing large digestate or slurry lagoons. The vertically and horizontally adjustable barrel raises sediment and displaces the crust. The lateral pipe allows transfer to another pit, filling a transport tank or even ...

Flow: 0.3 l/min - 24 l/min
Pressure: 320 bar
Power: 0.2 kW - 5.5 kW

Compactness, efficiency and reliability for maximum performance in every application.Andrea GambuseraHydronit CEODC Electric Pumps BULL Series (EPB) are designed to offer a compact, efficient and reliable system, combining direct current ...

MANUFACTURER PART NUMBERPompa iniezione PF FAMILYPOMPE COMMON RAIL MODELLOBOSCH - CR PUMPS

Tackle slurry spreading with ease Gissing’s engine stations and centrifugal pumps support farmers and contractors by transporting fluids effectively. This is achieved through the conversion of rotational kinetic energy and the hydrodynamic ...

The BEZA series gear pumps adopt a high-strength aluminum pump body, the front and rear covers are made of cast iron, and the axial clearance is automatically compensated. It has high pressure, long service life and can maintain high ...

Flow: 25, 20, 80, 140 m³/h
Pressure: 0.6 bar - 15 bar
Power: 7.5, 11, 30, 22 kW

Low wear Insensitive to foreign bodies High suction power (0.6-0.8 bar) High dry matter content is not a problem (25%) Low power consumption Low maintenance costs Integrated pressure monitoring Integrated stone trap Can be used ...

Type ALY1130 - Casting Vacuum Pump ( 70 mm - Dry ) ALY1131 - Casting Vacuum Pump ( 70 mm - Oil ) ALY1132 - Casting Vacuum Pump ( 80 mm - Dry ) ALY1133 - Casting Vacuum Pump ( 80 mm - Oil ) ALY1134 - Casting Vacuum Pump ( 85 mm - ...

Since the early 1980s, GWE has delivered a wide range of models for hand pumps around the world and particularly to Africa. Based on decades of experience with the installation of hand pumps according to country-specific requirements ...

Flow: 0 l/h - 200 l/h
Power: 65 W

The low-noise EE300 centrifugal pump impresses with its compact design and attractive appearance. It is equipped with a 1.5 m power cable and features an integrated check valve that prevents condensate from flowing back into the tank. The ...

Flow: 25 l/min
Pressure: 25 bar

Mobile gas powered pump -Gas powered pump with handle -2-piston pump AR 252 -Incl. suction and return hose assy. -Honda 4-cycle gas engine -Max. spraying distance 8 – 10 m -1 pressure outlet Technical data Chemical resistance For ...

Flow: 0 l/min - 150 l/min
Pressure: 6 bar
Power: 0.4 kW - 1.6 kW

Electrical vertical axis submersible pumps Grundfos SQE series of 3″. Application • Suitable for both continuous functioning and intermittent for domestic water supply for small irrigation systems Features • Built-in non-return ...

Flow: 200 l/min
Power: 1.1 kW

• Vacuum Pump With Capillary Oiler With Silencer & Non Return Valve • Palette (Fiber) ...

Ideal for pumping from reservoirs, rivers and wells, the vertical turbine (VT) system from Watertronics is a single-source solution that can meet virtually any pressure and flow requirement regardless of water lift or depth. Our advanced ...

Flow: 5,000 l/min

SCHOUTEN orcan pumpunit to feed the Schouten Drag-hose system. This pumpunit is equiped with a Doda AFI35HD centrifugalpump for pumping the slurry to the injector and a vacuumpump for starting up. Optional a Vogelsang rotary lobe pump ...

Pressure: 400, 300, 320, 350 bar

Applied to high-voltage open-loop systems, it adopts a specially designed new power structure with a smaller size and stronger anti-pollution ability. 18~105 cc/rev Serial Advantage ·Variable pump in swash-plate design for open ...

Flow: 300, 360 m³/h
Pressure: 0 bar - 4.5 bar
Power: 5.5 kW - 30 kW

BENEFITS AT A GLANCE RELIABLE Delivery rates of up to 300m3/h (3000 series) or 360m3/h (4000 series) and a maximum pressure of 4.5 bar (4000 series) FLEXIBLE Numerous configuration possibilities, adapted to individual requirements LONG-LASTING Unsusceptible ...

Flow: 4.5 l/h - 2,500 l/h
Pressure: 0.15 bar - 4 bar

This Diaphragm Metering Pump meets the dosing needs from 4.5 to 2500 l/h. .Best performances at low flow (young animals / small groups) .Best performances at low pressure (headertanks, pressure drops) .Unequalled motor lifespan including ...

Flow: 23 l/min
Pressure: 1 bar - 30 bar

Self-priming hand pump for suction from open containers or from streams and ponds. Perfect for use in construction and for industrial painting. It can also be used for the suction and movement of non-potable water to purification units ...

Flow: 1 m³/h - 7 m³/h
Power: 0.3 kW - 93 kW

As a professional manufacturer of complete solar power systems and solar water pump systems, Yibiyuan offers practical, professional, and affordable AC and DC solar-powered water pumping systems for residential and commercial applications. ...

Flow: 0.2 m³/h - 7 m³/h
Power: 1,500, 300, 600, 900 W

The 3” WPS® PMM solar pumping pack is best solution in the market for solar pumping systems in 3” narrow wells. This pack is a perfect combination of long-lasting products with high efficiencies. The 3” WPS® PMM solar pumping pack ...

Pressure: 2 bar - 16 bar

Irriland produces motor pump units for agricultural applications (e.g. irrigation by sprinkling, drip irrigation, pivot irrigation, etc.) and / or for industrial applications (e.g. motor pumps for fire-fighting units, for transferring ...