{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Power: 55 kW - 175 kW
Low-cost irrigation starts already with the design of the entire system. An essential part of this is that the pumping unit matches perfectly with the irrigation machine. Obtaining both from one supplier has a huge advantage: the irrigation system always ...
BAUER Ges.m.b.H. Röhren- und Pumpenwerk
... As reliable as the 3" Pump, this compact version offers performance and efficiency where space is limited. Key Features •The pump can be installed in a hole as small as 16" (406 mm) in diameter. •Direct drive only. •Available motors: 3 or 5 HP. ...
GEA
Flow: 10 l/h - 2,500 l/h
Pressure: 0.3 bar - 6 bar
... The D25+care product line is the new high-value Dosatron Standard for Animal Health applications, for flow from 10l/h to 2.5m3/h .Accurate, reliable and homogeneous dosing of vaccinations and treatments in drinking water .Certified suitable for Food ...
Dosatron International S.A.S.
Flow: 450 m³/h
Pressure: 16 bar
... Blockpump Single Stage Pumps – LSB Single stage end suction pump in close coupled (block) design, based on the hydraulics acc. to ISO 2858, with direct mounted IEC motor, design B5. ...
Xylem Water Solutions Herford GmbH (Wedeco)
... Stirring, mixing, homogenising, pumping, filling
- Maximum pumping rate: 192 - 531 m3/h
- Maximum head: 15 - 30 m
- Motor: 5.5 / 7.5 / 11.0 / 15.0 / 22.0 / 30.0 kW
- For pit depths from 1.5 to 8.0 m
- Available with or
SUMA Rührtechnik
... Stirring, mixing, homogenising, pumping, filling
- Maximum pumping rate: 192 - 350 m3/h
- Maximum head: 20 - 22 m
- Motor: 11.0 / 15.0 kW
- For pit depth from 1.5 - 8.0 m
- Horizontally and vertically adjustable
The ...
SUMA Rührtechnik
Flow: 9,200, 8,200, 7,200 us gal/min
Power: 185, 290, 240 ch
... The single 10” outlet operates at maximum efficiency, creating less turbulence and wear than multi-ported volute models. THE BIG GUN The 8” diameter cannon delivers high-powered, long distance agitation. BUILT FOR SAND Extra heavy construction ...
Valmetal
Power: 130, 180 ch
... Incredible intake suction pulls solids into the cutter knives, reducing the toughest crust to nothing in just seconds. COMBINES THE HIGH-VOLUME MIXING OF A PROPELLER AGITATOR with the power and reach of a lagoon pump. The resulting hybrid design radically ...
Valmetal
Power: 100 ch - 240 ch
... POWERBOOM LOADING PIPE CAN BE OPERATED RIGHT FROM THE TRACTOR SEAT and sets up in seconds. There are no clamps, pipes or hoses to manhandle so it’s a one man job. WORK THE WAY YOU WISH by choosing the horsepower you want, the body length, the impeller ...
Valmetal
Flow: 190 l/h - 350 l/h
Pressure: 6, 10 bar
... The PS1 Series piston dosing pump offers a flexibility of choice, combining different motor and pump head power options, and guaranteeing a solution for almost any eventuality or application. The performance of the PS1 Series reaches flow rates of ...
Gestiriego
Flow: 110 l/h - 730 l/h
Pressure: 4 bar - 17 bar
The PS1 model pump is a piston dosing pump with a spring return mechanism and aluminium gearbox casing. Thanks to its quality and reliability, it is the leading pump in the market. It also offers reliable solutions for the dosing, injection and transfer ...
Gestiriego
Flow: 145, 318, 210 m³/h
Pressure: 0.5 bar - 200 bar
Power: 2.2, 1.5, 1.3, 0.9 kW
... FERTIGATION ELECTRIC MIXERS Pressure flows of 0.5 bar - POWER | FLOW | CAUDAL CIRCULANTE | VACUUM | PRESSURE | CODE - 0.85 kW 50 HZ SINGLE-PHASE | 145 m³/h | 380 l/h | -160 mbar | 160 mbar | 461497 - 0.85 kW 50 HZ THREE-PHASE | 145 m³/h | 588 l/h | ...
Gestiriego
... Irrigation motorpumps with tanker chassis (400 - 500 - 850 litres) for sprinkler irrigation; Engines: John Deere - Iveco FPT - Volvo Penta, 4 or 6 cyl (from 82 to 238 hp); Pumps: Caprari, Rovatti o Sidermeccanica multistage; Control unit: Alarms ...
CASELLA MACCHINE AGRICOLE Srl
... Irrigation motorpumps with tanker chassis (400 - 500 - 850 litres) for sprinkler irrigation; Engines: John Deere - Iveco FPT - Volvo Penta, 4 or 6 cyl (from 82 to 238 hp); Pumps: Doda, Criman multistage; Control unit: Alarms management for ...
CASELLA MACCHINE AGRICOLE Srl
... Irrigation motorpumps with tanker chassis (400 - 500 - 850 litres) for sprinkler irrigation; Engines: John Deere - Iveco FPT - Volvo Penta, 4 or 6 cyl (from 82 to 238 hp); Pumps: Caprari, Rovatti o Sidermeccanica multistage; Control unit: Alarms ...
CASELLA MACCHINE AGRICOLE Srl
Flow: 250 m³/h
Power: 5.5 kW - 22 kW
CHIOR VPH Long-Shaft Cutting Pumps with suction from above and double chopping tool excel through their high pumping capacity and cutting efficiency. The design of the pump housing, either made of cast iron or stainless steel, enables a wide range of ...
SAVECO
Flow: 280, 260, 300 m³/h
Power: 18.5, 11, 15, 7.5 kW
The CHIOR SPH Submersible Chopping Pump is designed to shred and eject long-fibre solids in livestock manure, biogas digestate and industrial wastewater. The powerful shear system is the heart of the unit allowing the pump to operate continuously, even ...
SAVECO
Power: 2.2 kW - 22 kW
... CHIOR SPB-type Submersible Chopper Pumps are designed for shredding and lifting slurry from animal husbandry, biogas digestate or industrial wastewater containing lumpy and fibrous solids. The highly efficient size reduction of the fibrous components ...
SAVECO
Flow: 18 m³/h - 179 m³/h
Pressure: 3 bar - 11 bar
Power: 83 ch
Model with hot galvanised ground support platform, giving 360° turntable rotation.Structure shot-blasted treated with 2 applications of powder coating epoxy anti-corrosive primer and a top coat of polyesthere paint with high shock resistence, high atmospheric ...
IRRIMEC s.r.l.
Flow: 18 m³/h - 168 m³/h
Pressure: 3 bar - 11 bar
Power: 126 ch
Model with hot galvanised ground support platform, giving 360° turntable rotation.Structure shot-blasted treated with 2 applications of powder coating epoxy anti-corrosive primer and a top coat of polyesthere paint with high shock resistence, high atmospheric ...
IRRIMEC s.r.l.
Flow: 18 m³/h - 222 m³/h
Pressure: 3 bar - 11 bar
Power: 126 ch
Model with hot galvanised ground support platform, giving 360° turntable rotation.Structure shot-blasted treated with 2 applications of powder coating epoxy anti-corrosive primer and a top coat of polyesthere paint with high shock resistence, high atmospheric ...
IRRIMEC s.r.l.
Flow: 0 l/min - 3,600 l/min
Power: 3 kW - 22 kW
This close-coupled pumps, projected and realized following DIN 24255 (uni en 733) regulation standards, are used to pump chemically clean water without suspended solid parts in heating or cooling systems, irrigation systems, fire-fighting units. The big ...
Stac srl
Flow: 0 l/min - 450 l/min
Power: 1.1 kW - 2.2 kW
... These pumps are suitable to be used in domestic, agricultural and industrial applications when big deliveries are requested with medium discharge head. Available also with 2″ x 2″ inlet and outlet. - Deliveries: 0 – 450 lt/min - Heights: 0 – 32.5 mt - ...
Stac srl
Flow: 0 l/min - 180 l/min
Power: 0.8 kW - 5.5 kW
... Double-impeller pumps suitable for agricultural, domestic and industrial use where high discharge heads are requested. Heights: 0 – 92,5 mt ...
Stac srl
Flow: 0 l/min - 600 l/min
Clean water pumps are great for general water transfer, pool water removal, irrigation, and civil engineering. The pump housing and pump cover are made with durable aluminum alloy, along with cast-iron impellers and diffusers, which increases pump capacity, ...
JSC Mototecha
Flow: 0 l/min - 900 l/min
Clean water pumps are great for general water transfer, pool water removal, irrigation, and civil engineering. The pump housing and pump cover are made with durable aluminum alloy, along with cast-iron impellers and diffusers, which increases pump capacity, ...
JSC Mototecha
Flow: 0 l/min - 900 l/min
... Functions of the flow distribution system: -tank filling; -mixing the contents of the container; -pipeline closing; -filling the sprayer using the same filling hose. Self-priming design makes your job much easier (requires initial priming ...
JSC Mototecha
Flow: 26 m³/h
Pressure: 40 bar
... NUMBER OF PISTONS: 3 FLOW RATE: 26 LT / MIN PRESSURE: 40 BAR ...
ÖNTAR AGRICULTURAL MACHINERY
Flow: 30 m³/h
Pressure: 50 bar
... MEMBRANE NUMBER: 3 FLOW RATE: 30 LT / MIN PRESSURE: 50 BAR ...
ÖNTAR AGRICULTURAL MACHINERY
Flow: 40 m³/h
Pressure: 50 bar
... MEMBRANE NUMBER: 3 FLOW RATE: 40 LT / MIN PRESSURE: 50 BAR ...
ÖNTAR AGRICULTURAL MACHINERY
Flow: 16.4 l/min - 341 l/min
Pressure: 0 bar - 20 bar
Power: 0.1 kW - 13.1 kW
... Low pressure diaphragm pumps Configuration: 2 diaphragms in NBR (Desmopan® or Viton available on request). Parts in contact with spray liquid: anodized aluminium. Standard: pressure accumulator. On request: safety valve and PTO protection. Configuration: ...
COMET S.p.A.
Flow: 3,600 m³/h - 12,500 m³/h
Pressure: 12 bar - 28.1 bar
Power: 78 kW - 84 kW
... Product overview
All engine-driven pump and engine-driven clutch units of the MOP series are manufactured with new factory engines: FPT (Iveco), JCB, Deutz, J. Deere, Perkins. All pumps belong to the high-performance type manufactured by RM ...
Flow: 90 m³/h - 522 m³/h
... Driven by the tractor P.T.O., the pump takes the liquid manure from the bottom of the pit and throws it via a side outlet in order to remove it. This outlet is horizontally and vertically adjustable in order to fit the pit’s geometry. When the side ...
Flow: 300 m³/h
Pressure: 10 bar
The FLUX peristaltic pump is a powerful self-priming positive displacement pump, which impresses customers with its extreme robustness and ease of maintenance. It operates in such a way that abrasive media and media that is sensitive to shearing can be ...
Flux
Flow: 26 m³/h
Power: 0.8 kW - 1.1 kW
... Multi-channel open impeller and double chopping system. •Chopping system. •Head 17 m •Discharge outlet: 40 mm ...
CRI-MAN S.p.A.
Flow: 0.2 l/h - 1,128 l/h
Pressure: 4.7 bar - 350 bar
Power: 0.2, 0.8 kW
... Higher performance pump for continuous operation High accuracy: linearity±1%, repeteability ±3%, steady state accuracy ±1% High pressure applications Designed according to API675 standard ATEX compliance (upon request) TEKDOS FP ...
ITC S.L.
Flow: 17, 25, 35, 50 m³/h
Pressure: 4, 7, 9, 10 bar
Rotary lobe pumps in the VX100 series are used wherever you only need small capacities but you want the advantages of rotary lobe pumps from the VX series. With capacities of up to 50 m³/h and pressures up to 10 bar, this is the cost-effective and easy-to-maintain ...
Hugo Vogelsang Maschinenbau GmbH
Power: 75 ch
Our GreenLine manure pumps follow in the Daritech tradition of bringing value to dairies throughout North America by providing long wearing, highly efficient solutions to the many challenges that manure management presents. Our manure pump line offers ...
Daritech, Inc.
Flow: 0 l/min - 350 l/min
Centrifugal pumps for use on municipal watering or irrigation trucks, high volume transfer systems or on agricultural sprayers
agrotop GmbH
Flow: 1,200 l/min
... Centrifugal pump available in cast iron (glass filled nylon impeller) or Stainless Steel (glass-filled polypropylene impeller and Life Guard silicon carbide mechanical seals). Compact design. Driven by a robust hydraulic motor. Maximum flow 1200 litres ...
Pentair (Hypro & Shurflo)
Flow: 3 m³/h - 30 m³/h
Power: 5.5, 7.5 kW
The working principle of the Delta PMV pump enables a very smooth grapes transfer.
Bucher Vaslin
Flow: 5,000 l/min
SCHOUTEN orcan pumpunit to feed the Schouten Drag-hose system. This pumpunit is equiped with a Doda AFI35HD centrifugalpump for pumping the slurry to the injector and a vacuumpump for starting up. Optional a Vogelsang rotary lobe pump can be fitted for ...
Schouten Machines B.V.
Flow: 500 m³/h
SlurryKat pumps are among the most dependable, long lasting submersible pumps available. Designed for fast liquid transfer, and to handle the most demanding applications, the unique design enables the pump to transfer a high dry matter liquids in generous ...
SlurryKat Ltd.
... We have been in the center pivot and linear irrigation industry for nearly 60 years. Through the years, we have become not only the leader in precision irrigation, but also the most trusted name in irrigation. Now, Valley® Water Management gives growers ...
... - Heavy Duty Frame - Break, Signal & Clearance Lights - Electric Over Hydraulic Brakes - Boom Support Structure - ST235/85R16 LR-G Radial Tires (18 Foot) - ST235/75R17.5 LR-J Radial Tires (24 Foot) - 1-3/8" Oak Deck - Slipper Spring Axles - Breakaway ...
... AP motor pump unit is available in a variety of engine powers and pump capacities, both high and low pressure and with or without low-noise cover. The low pressure version is used to transport water (1 à 2 bar) from the pump to the irrigation machine ...
AP Machinebouw B.V.
... CATEGORY / TYPOLOGY Potable water / Lifting systems
DESCRIPTION The Archimedean screw pump PVA is designed for lifting large flow rates at low head, handling liquids containing sludge and solids. Typical applications include stormwater ...
Flow: 4,800 l/h
Pressure: 5 bar
Power: 1,300 W
kuril
... MANUFACTURER PART NUMBERPompa iniezione PF FAMILYPOMPE COMMON RAIL MODELLOBOSCH - CR PUMPS ...
... Overview
The HL100 detergent dosing pump is designed for precise dosing of detergents and other chemicals. It allows linear adjustment of flow and ensures reproducibility and repeatability of the delivered volume, optimizing cleaning and ...
dta farm
The BEZA series gear pumps adopt a high-strength aluminum pump body, the front and rear covers are made of cast iron, and the axial clearance is automatically compensated. It has high pressure, long service life and can maintain high efficiency for a ...
Flow: 25, 20, 80, 140 m³/h
Pressure: 0.6 bar - 15 bar
Power: 7.5, 11, 30, 22 kW
... Low wear Insensitive to foreign bodies High suction power (0.6-0.8 bar) High dry matter content is not a problem (25%) Low power consumption Low maintenance costs Integrated pressure monitoring Integrated stone trap Can be used as a suction bar Pass-through ...
Flow: 0 l/h - 200 l/h
Power: 65 W
... The low-noise EE300 centrifugal pump impresses with its compact design and attractive appearance. It is equipped with a 1.5 m power cable and features an integrated check valve that prevents condensate from flowing back into the tank. The EE300 tank ...
Flow: 1,000, 2,000 l/min
Ideal solution for mixing large digestate or slurry lagoons. The vertically and horizontally adjustable barrel raises sediment and displaces the crust. The lateral pipe allows transfer to another pit, filling a transport tank or even supplying a pressure ...
ARMOR Industries
Flow: 0.3 l/min - 24 l/min
Pressure: 320 bar
Power: 0.2 kW - 5.5 kW
Compactness, efficiency and reliability for maximum performance in every application.Andrea GambuseraHydronit CEODC Electric Pumps BULL Series (EPB) are designed to offer a compact, efficient and reliable system, combining direct current electric motors ...
... Tackle slurry spreading with ease Gissing’s engine stations and centrifugal pumps support farmers and contractors by transporting fluids effectively. This is achieved through the conversion of rotational kinetic energy and the hydrodynamic energy of ...